3ware 9650SE-4PML RAID-1 Question: One reader process starves I/Oto the rest of the system?

[Justin Piszcz]

Hello,

I tried CFQ/deadline schedulers, when I run the following:

# /usr/bin/time dd if=/dev/sdb2 of=/raid6/sdb2.img

Behind which are 2 x Raptor 150GB disks, the system is pretty much unusable
when I control-c the dd, it comes back to life.

The RAID-6 is a 15-disk RAID-6 which does 600-700MB/s writes.

All cards are on PCI-e and have adequate bandwidth on a P55 board (DP55KG).

Are there any recommended tuning options for a RAID-1 configuration, such that
a heavy I/O read or write operation does not pause the system?

During the dd..

Drive Performance Monitor Configuration for /c1 ...
Performance Monitor: ON
Version: 1
Max commands for averaging: 100
Max latency commands to save: 10
Requested data: Instantaneous Drive Statistics

                               Queue           Xfer         Resp
Port   Status           Unit   Depth   IOPs    Rate(MB/s)   Time(ms)
------------------------------------------------------------------------
p0     OK               u0     25      762     26.219       19 
p1     OK               u0     23      780     25.953       24 
p2     OK               u1     1       0       0.000        98 
p3     NOT-PRESENT      -      -       -       -            -

Justin.


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/