Re: [REGRESSION] EFI boot on x86 fails in .32
From: Matthew Garrett
Date: Mon Oct 19 2009 - 23:07:29 EST
This seems to be caused by 7bd867dfb4e0357e06a3211ab2bd0e714110def3 -
reverting that results in a booting kernel. Can't say I understand how
or why, but...
On Tue, Oct 20, 2009 at 01:34:00AM +0100, Matthew Garrett wrote:
> 2.6.32-rc5 (and some earlier git checkout I had) fail to boot on my HP
> 2530p when using EFI - they boot fine with the BIOS emulation instead. I
> get an early exception when print_efi_memmap() is called, which implies
> that the memory map is broken somehow. Here's the dmesg for a working
> boot:
>
> Initializing cgroup subsys cpuset
> Initializing cgroup subsys cpu
> Linux version 2.6.30.8-64.fc11.x86_64 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.1 20090725 (Red Hat 4.4.1-2) (GCC) ) #1 SMP Fri Sep 25 04:43:32 EDT 2009
> Command line: ro root=UUID=fd334e23-080a-449d-8993-07758e5cd581 rhgb quiet
> KERNEL supported cpus:
> Intel GenuineIntel
> AMD AuthenticAMD
> Centaur CentaurHauls
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 0000000000100000 - 0000000075a4c000 (usable)
> BIOS-e820: 0000000075a4c000 - 0000000075a4e000 (reserved)
> BIOS-e820: 0000000075a4e000 - 0000000076870000 (usable)
> BIOS-e820: 0000000076870000 - 0000000076880000 (ACPI NVS)
> BIOS-e820: 0000000076880000 - 0000000078fb1000 (usable)
> BIOS-e820: 0000000078fb1000 - 00000000791b1000 (ACPI NVS)
> BIOS-e820: 00000000791b1000 - 000000007a88f000 (usable)
> BIOS-e820: 000000007a88f000 - 000000007a9cf000 (reserved)
> BIOS-e820: 000000007a9cf000 - 000000007aacf000 (ACPI NVS)
> BIOS-e820: 000000007aacf000 - 000000007aaff000 (ACPI data)
> BIOS-e820: 000000007aaff000 - 000000007ab00000 (usable)
> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> BIOS-e820: 00000000fffa0000 - 00000000fffa7000 (reserved)
> EFI v2.00 by INTEL
> ACPI=0x7aafe000 ACPI 2.0=0x7aafe014 SMBIOS=0x7a99f718
> Kernel-defined memdesc doesn't match the one from EFI!
> EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
> EFI: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x0000000000071000) (0MB)
> EFI: mem02: type=2, attr=0xf, range=[0x0000000000071000-0x0000000000073000) (0MB)
> EFI: mem03: type=7, attr=0xf, range=[0x0000000000073000-0x0000000000075000) (0MB)
> EFI: mem04: type=3, attr=0xf, range=[0x0000000000075000-0x0000000000090000) (0MB)
> EFI: mem05: type=7, attr=0xf, range=[0x0000000000090000-0x0000000000097000) (0MB)
> EFI: mem06: type=4, attr=0xf, range=[0x0000000000097000-0x0000000000098000) (0MB)
> EFI: mem07: type=3, attr=0xf, range=[0x0000000000098000-0x00000000000a0000) (0MB)
> EFI: mem08: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000c00000) (11MB)
> EFI: mem09: type=3, attr=0xf, range=[0x0000000000c00000-0x0000000001000000) (4MB)
> EFI: mem10: type=7, attr=0xf, range=[0x0000000001000000-0x000000007493e000) (1849MB)
> EFI: mem11: type=2, attr=0xf, range=[0x000000007493e000-0x0000000074940000) (0MB)
> EFI: mem12: type=7, attr=0xf, range=[0x0000000074940000-0x0000000074943000) (0MB)
> EFI: mem13: type=2, attr=0xf, range=[0x0000000074943000-0x00000000759cd000) (16MB)
> EFI: mem14: type=1, attr=0xf, range=[0x00000000759cd000-0x0000000075a05000) (0MB)
> EFI: mem15: type=3, attr=0xf, range=[0x0000000075a05000-0x0000000075a4c000) (0MB)
> EFI: mem16: type=0, attr=0xf, range=[0x0000000075a4c000-0x0000000075a4e000) (0MB)
> EFI: mem17: type=3, attr=0xf, range=[0x0000000075a4e000-0x0000000075f0b000) (4MB)
> EFI: mem18: type=4, attr=0xf, range=[0x0000000075f0b000-0x0000000076870000) (9MB)
> EFI: mem19: type=10, attr=0xf, range=[0x0000000076870000-0x0000000076880000) (0MB)
> EFI: mem20: type=3, attr=0xf, range=[0x0000000076880000-0x000000007688f000) (0MB)
> EFI: mem21: type=7, attr=0xf, range=[0x000000007688f000-0x0000000077a8f000) (18MB)
> EFI: mem22: type=2, attr=0xf, range=[0x0000000077a8f000-0x0000000077d99000) (3MB)
> EFI: mem23: type=4, attr=0xf, range=[0x0000000077d99000-0x0000000077db9000) (0MB)
> EFI: mem24: type=7, attr=0xf, range=[0x0000000077db9000-0x0000000077dc9000) (0MB)
> EFI: mem25: type=4, attr=0xf, range=[0x0000000077dc9000-0x0000000077fcf000) (2MB)
> EFI: mem26: type=7, attr=0xf, range=[0x0000000077fcf000-0x0000000077fd0000) (0MB)
> EFI: mem27: type=4, attr=0xf, range=[0x0000000077fd0000-0x0000000078462000) (4MB)
> EFI: mem28: type=7, attr=0xf, range=[0x0000000078462000-0x0000000078463000) (0MB)
> EFI: mem29: type=4, attr=0xf, range=[0x0000000078463000-0x0000000078fb1000) (11MB)
> EFI: mem30: type=10, attr=0xf, range=[0x0000000078fb1000-0x00000000791b1000) (2MB)
> EFI: mem31: type=4, attr=0xf, range=[0x00000000791b1000-0x0000000079269000) (0MB)
> EFI: mem32: type=7, attr=0xf, range=[0x0000000079269000-0x000000007926c000) (0MB)
> EFI: mem33: type=4, attr=0xf, range=[0x000000007926c000-0x000000007a88f000) (22MB)
> EFI: mem34: type=5, attr=0x800000000000000f, range=[0x000000007a88f000-0x000000007a92a000) (0MB)
> EFI: mem35: type=5, attr=0x800000000000000f, range=[0x000000007a92a000-0x000000007a98f000) (0MB)
> EFI: mem36: type=6, attr=0x800000000000000f, range=[0x000000007a98f000-0x000000007a993000) (0MB)
> EFI: mem37: type=0, attr=0xf, range=[0x000000007a993000-0x000000007a99b000) (0MB)
> EFI: mem38: type=6, attr=0x800000000000000f, range=[0x000000007a99b000-0x000000007a9bf000) (0MB)
> EFI: mem39: type=0, attr=0xf, range=[0x000000007a9bf000-0x000000007a9c4000) (0MB)
> EFI: mem40: type=0, attr=0xf, range=[0x000000007a9c4000-0x000000007a9cf000) (0MB)
> EFI: mem41: type=10, attr=0xf, range=[0x000000007a9cf000-0x000000007aa38000) (0MB)
> EFI: mem42: type=10, attr=0xf, range=[0x000000007aa38000-0x000000007aacf000) (0MB)
> EFI: mem43: type=9, attr=0xf, range=[0x000000007aacf000-0x000000007aad5000) (0MB)
> EFI: mem44: type=9, attr=0xf, range=[0x000000007aad5000-0x000000007aaff000) (0MB)
> EFI: mem45: type=4, attr=0xf, range=[0x000000007aaff000-0x000000007ab00000) (0MB)
> EFI: mem46: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
> EFI: mem47: type=11, attr=0x8000000000000000, range=[0x00000000fffa0000-0x00000000fffa7000) (0MB)
> DMI 2.4 present.
> last_pfn = 0x7ab00 max_arch_pfn = 0x100000000
> MTRR default type: uncachable
> MTRR fixed ranges enabled:
> 00000-9FFFF write-back
> A0000-BFFFF uncachable
> C0000-FFFFF write-protect
> MTRR variable ranges enabled:
> 0 base 0FFE00000 mask FFFE00000 write-protect
> 1 base 000000000 mask F80000000 write-back
> 2 base 07F000000 mask FFF000000 uncachable
> 3 base 076870000 mask FFFFF0000 uncachable
> 4 disabled
> 5 disabled
> 6 disabled
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> original variable MTRRs
> reg 0, base: 4094MB, range: 2MB, type WP
> reg 1, base: 0GB, range: 2GB, type WB
> reg 2, base: 2032MB, range: 16MB, type UC
> reg 3, base: 1941952KB, range: 64KB, type UC
> total RAM coverred: 2031M
> gran_size: 64K chunk_size: 64K num_reg: 7 lose cover RAM: 138944K
> gran_size: 64K chunk_size: 128K num_reg: 7 lose cover RAM: 138688K
> gran_size: 64K chunk_size: 256K num_reg: 7 lose cover RAM: 138688K
> gran_size: 64K chunk_size: 512K num_reg: 7 lose cover RAM: 138688K
> gran_size: 64K chunk_size: 1M num_reg: 7 lose cover RAM: 138176K
> gran_size: 64K chunk_size: 2M num_reg: 7 lose cover RAM: 137152K
> gran_size: 64K chunk_size: 4M num_reg: 7 lose cover RAM: 135104K
> gran_size: 64K chunk_size: 8M num_reg: 7 lose cover RAM: 128M
> gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 128M
> gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G
> gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G
> gran_size: 64K chunk_size: 128M num_reg: 7 lose cover RAM: 0G
> gran_size: 64K chunk_size: 256M num_reg: 7 lose cover RAM: 138944K
> gran_size: 64K chunk_size: 512M num_reg: 7 lose cover RAM: 138944K
> gran_size: 64K chunk_size: 1G num_reg: 7 lose cover RAM: 138944K
> gran_size: 64K chunk_size: 2G num_reg: 7 lose cover RAM: 138944K
> gran_size: 128K chunk_size: 128K num_reg: 7 lose cover RAM: 138944K
> gran_size: 128K chunk_size: 256K num_reg: 7 lose cover RAM: 138688K
> gran_size: 128K chunk_size: 512K num_reg: 7 lose cover RAM: 138688K
> gran_size: 128K chunk_size: 1M num_reg: 7 lose cover RAM: 138176K
> gran_size: 128K chunk_size: 2M num_reg: 7 lose cover RAM: 137152K
> gran_size: 128K chunk_size: 4M num_reg: 7 lose cover RAM: 135104K
> gran_size: 128K chunk_size: 8M num_reg: 7 lose cover RAM: 131136K
> gran_size: 128K chunk_size: 16M num_reg: 7 lose cover RAM: 131136K
> gran_size: 128K chunk_size: 32M num_reg: 7 lose cover RAM: 64K
> gran_size: 128K chunk_size: 64M num_reg: 7 lose cover RAM: 64K
> gran_size: 128K chunk_size: 128M num_reg: 7 lose cover RAM: 64K
> gran_size: 128K chunk_size: 256M num_reg: 7 lose cover RAM: 138944K
> gran_size: 128K chunk_size: 512M num_reg: 7 lose cover RAM: 138944K
> gran_size: 128K chunk_size: 1G num_reg: 7 lose cover RAM: 138944K
> gran_size: 128K chunk_size: 2G num_reg: 7 lose cover RAM: 138944K
> gran_size: 256K chunk_size: 256K num_reg: 7 lose cover RAM: 138944K
> gran_size: 256K chunk_size: 512K num_reg: 7 lose cover RAM: 138688K
> gran_size: 256K chunk_size: 1M num_reg: 7 lose cover RAM: 138176K
> gran_size: 256K chunk_size: 2M num_reg: 7 lose cover RAM: 137152K
> gran_size: 256K chunk_size: 4M num_reg: 7 lose cover RAM: 135104K
> gran_size: 256K chunk_size: 8M num_reg: 7 lose cover RAM: 131264K
> gran_size: 256K chunk_size: 16M num_reg: 7 lose cover RAM: 131264K
> gran_size: 256K chunk_size: 32M num_reg: 7 lose cover RAM: 192K
> gran_size: 256K chunk_size: 64M num_reg: 7 lose cover RAM: 192K
> gran_size: 256K chunk_size: 128M num_reg: 7 lose cover RAM: 192K
> gran_size: 256K chunk_size: 256M num_reg: 7 lose cover RAM: 138944K
> gran_size: 256K chunk_size: 512M num_reg: 7 lose cover RAM: 138944K
> gran_size: 256K chunk_size: 1G num_reg: 7 lose cover RAM: 138944K
> gran_size: 256K chunk_size: 2G num_reg: 7 lose cover RAM: 138944K
> gran_size: 512K chunk_size: 512K num_reg: 7 lose cover RAM: 138688K
> gran_size: 512K chunk_size: 1M num_reg: 7 lose cover RAM: 138688K
> gran_size: 512K chunk_size: 2M num_reg: 7 lose cover RAM: 138688K
> gran_size: 512K chunk_size: 4M num_reg: 7 lose cover RAM: 138688K
> gran_size: 512K chunk_size: 8M num_reg: 7 lose cover RAM: 138688K
> gran_size: 512K chunk_size: 16M num_reg: 7 lose cover RAM: 131520K
> gran_size: 512K chunk_size: 32M num_reg: 7 lose cover RAM: 448K
> gran_size: 512K chunk_size: 64M num_reg: 7 lose cover RAM: 448K
> gran_size: 512K chunk_size: 128M num_reg: 7 lose cover RAM: 448K
> gran_size: 512K chunk_size: 256M num_reg: 7 lose cover RAM: 138688K
> gran_size: 512K chunk_size: 512M num_reg: 7 lose cover RAM: 138688K
> gran_size: 512K chunk_size: 1G num_reg: 7 lose cover RAM: 138688K
> gran_size: 512K chunk_size: 2G num_reg: 7 lose cover RAM: 138688K
> gran_size: 1M chunk_size: 1M num_reg: 7 lose cover RAM: 138688K
> gran_size: 1M chunk_size: 2M num_reg: 7 lose cover RAM: 138688K
> gran_size: 1M chunk_size: 4M num_reg: 7 lose cover RAM: 138688K
> gran_size: 1M chunk_size: 8M num_reg: 7 lose cover RAM: 138688K
> gran_size: 1M chunk_size: 16M num_reg: 7 lose cover RAM: 131520K
> gran_size: 1M chunk_size: 32M num_reg: 7 lose cover RAM: 448K
> gran_size: 1M chunk_size: 64M num_reg: 7 lose cover RAM: 448K
> gran_size: 1M chunk_size: 128M num_reg: 7 lose cover RAM: 448K
> gran_size: 1M chunk_size: 256M num_reg: 7 lose cover RAM: 138688K
> gran_size: 1M chunk_size: 512M num_reg: 7 lose cover RAM: 138688K
> gran_size: 1M chunk_size: 1G num_reg: 7 lose cover RAM: 138688K
> gran_size: 1M chunk_size: 2G num_reg: 7 lose cover RAM: 138688K
> gran_size: 2M chunk_size: 2M num_reg: 7 lose cover RAM: 138688K
> gran_size: 2M chunk_size: 4M num_reg: 7 lose cover RAM: 138688K
> gran_size: 2M chunk_size: 8M num_reg: 7 lose cover RAM: 138688K
> gran_size: 2M chunk_size: 16M num_reg: 7 lose cover RAM: 131520K
> gran_size: 2M chunk_size: 32M num_reg: 7 lose cover RAM: 448K
> gran_size: 2M chunk_size: 64M num_reg: 7 lose cover RAM: 448K
> gran_size: 2M chunk_size: 128M num_reg: 7 lose cover RAM: 448K
> gran_size: 2M chunk_size: 256M num_reg: 7 lose cover RAM: 138688K
> gran_size: 2M chunk_size: 512M num_reg: 7 lose cover RAM: 138688K
> gran_size: 2M chunk_size: 1G num_reg: 7 lose cover RAM: 138688K
> gran_size: 2M chunk_size: 2G num_reg: 7 lose cover RAM: 138688K
> gran_size: 4M chunk_size: 4M num_reg: 7 lose cover RAM: 138688K
> gran_size: 4M chunk_size: 8M num_reg: 7 lose cover RAM: 138688K
> gran_size: 4M chunk_size: 16M num_reg: 7 lose cover RAM: 131520K
> gran_size: 4M chunk_size: 32M num_reg: 7 lose cover RAM: 448K
> gran_size: 4M chunk_size: 64M num_reg: 7 lose cover RAM: 448K
> gran_size: 4M chunk_size: 128M num_reg: 7 lose cover RAM: 448K
> gran_size: 4M chunk_size: 256M num_reg: 7 lose cover RAM: 138688K
> gran_size: 4M chunk_size: 512M num_reg: 7 lose cover RAM: 138688K
> gran_size: 4M chunk_size: 1G num_reg: 7 lose cover RAM: 138688K
> gran_size: 4M chunk_size: 2G num_reg: 7 lose cover RAM: 138688K
> gran_size: 8M chunk_size: 8M num_reg: 7 lose cover RAM: 138688K
> gran_size: 8M chunk_size: 16M num_reg: 7 lose cover RAM: 131520K
> gran_size: 8M chunk_size: 32M num_reg: 7 lose cover RAM: 448K
> gran_size: 8M chunk_size: 64M num_reg: 7 lose cover RAM: 448K
> gran_size: 8M chunk_size: 128M num_reg: 7 lose cover RAM: 448K
> gran_size: 8M chunk_size: 256M num_reg: 7 lose cover RAM: 138688K
> gran_size: 8M chunk_size: 512M num_reg: 7 lose cover RAM: 138688K
> gran_size: 8M chunk_size: 1G num_reg: 7 lose cover RAM: 138688K
> gran_size: 8M chunk_size: 2G num_reg: 7 lose cover RAM: 138688K
> gran_size: 16M chunk_size: 16M num_reg: 7 lose cover RAM: 145856K
> gran_size: 16M chunk_size: 32M num_reg: 7 lose cover RAM: 145856K
> *BAD*gran_size: 16M chunk_size: 64M num_reg: 7 lose cover RAM: -7744K
> *BAD*gran_size: 16M chunk_size: 128M num_reg: 7 lose cover RAM: -7744K
> gran_size: 16M chunk_size: 256M num_reg: 7 lose cover RAM: 145856K
> gran_size: 16M chunk_size: 512M num_reg: 7 lose cover RAM: 145856K
> gran_size: 16M chunk_size: 1G num_reg: 7 lose cover RAM: 145856K
> gran_size: 16M chunk_size: 2G num_reg: 7 lose cover RAM: 145856K
> gran_size: 32M chunk_size: 32M num_reg: 7 lose cover RAM: 145856K
> *BAD*gran_size: 32M chunk_size: 64M num_reg: 7 lose cover RAM: -7744K
> *BAD*gran_size: 32M chunk_size: 128M num_reg: 7 lose cover RAM: -7744K
> gran_size: 32M chunk_size: 256M num_reg: 7 lose cover RAM: 145856K
> gran_size: 32M chunk_size: 512M num_reg: 7 lose cover RAM: 145856K
> gran_size: 32M chunk_size: 1G num_reg: 7 lose cover RAM: 145856K
> gran_size: 32M chunk_size: 2G num_reg: 7 lose cover RAM: 145856K
> gran_size: 64M chunk_size: 64M num_reg: 7 lose cover RAM: 176576K
> gran_size: 64M chunk_size: 128M num_reg: 7 lose cover RAM: 156096K
> gran_size: 64M chunk_size: 256M num_reg: 7 lose cover RAM: 176576K
> gran_size: 64M chunk_size: 512M num_reg: 7 lose cover RAM: 176576K
> gran_size: 64M chunk_size: 1G num_reg: 7 lose cover RAM: 176576K
> gran_size: 64M chunk_size: 2G num_reg: 7 lose cover RAM: 176576K
> gran_size: 128M chunk_size: 128M num_reg: 3 lose cover RAM: 245696K
> gran_size: 128M chunk_size: 256M num_reg: 3 lose cover RAM: 245696K
> gran_size: 128M chunk_size: 512M num_reg: 3 lose cover RAM: 245696K
> gran_size: 128M chunk_size: 1G num_reg: 3 lose cover RAM: 245696K
> gran_size: 128M chunk_size: 2G num_reg: 3 lose cover RAM: 245696K
> gran_size: 256M chunk_size: 256M num_reg: 3 lose cover RAM: 245696K
> gran_size: 256M chunk_size: 512M num_reg: 3 lose cover RAM: 245696K
> gran_size: 256M chunk_size: 1G num_reg: 3 lose cover RAM: 245696K
> gran_size: 256M chunk_size: 2G num_reg: 3 lose cover RAM: 245696K
> gran_size: 512M chunk_size: 512M num_reg: 2 lose cover RAM: 507840K
> gran_size: 512M chunk_size: 1G num_reg: 2 lose cover RAM: 507840K
> gran_size: 512M chunk_size: 2G num_reg: 2 lose cover RAM: 507840K
> gran_size: 1G chunk_size: 1G num_reg: 1 lose cover RAM: 1032128K
> gran_size: 1G chunk_size: 2G num_reg: 1 lose cover RAM: 1032128K
> gran_size: 2G chunk_size: 2G num_reg: 0 lose cover RAM: 2080704K
> mtrr_cleanup: can not find optimal value
> please specify mtrr_gran_size/mtrr_chunk_size
> init_memory_mapping: 0000000000000000-000000007ab00000
> 0000000000 - 007aa00000 page 2M
> 007aa00000 - 007ab00000 page 4k
> kernel direct mapping tables up to 7ab00000 @ 8000-c000
> RAMDISK: 77a8f000 - 77d98445
> ACPI: RSDP 000000007aafe014 00024 (v02 HPQOEM)
> ACPI: XSDT 000000007aafe120 00084 (v01 HPQOEM SLIC-MPC 0000000F 01000013)
> ACPI: FACP 000000007aafc000 000F4 (v03 HPQOEM 30E1 0000000F HP 00000001)
> ACPI: DSDT 000000007aade000 18BB2 (v01 HPQOEM 30E1 00000001 INTL 20060912)
> ACPI: FACS 000000007aa9d000 00040
> ACPI: HPET 000000007aafb000 00038 (v01 HPQOEM 30E1 00000001 HP 00000001)
> ACPI: APIC 000000007aafa000 00084 (v01 HPQOEM 30E1 00000001 HP 00000001)
> ACPI: MCFG 000000007aaf9000 0003C (v01 HPQOEM 30E1 00000001 HP 00000001)
> ACPI: TCPA 000000007aaf7000 00032 (v02 HPQOEM 30E1 00000000 HP 00000001)
> ACPI: SSDT 000000007aadb000 002DD (v01 HPQOEM SataAhci 00001000 INTL 20060912)
> ACPI: SLIC 000000007aad9000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
> ACPI: DMAR 000000007aad8000 00120 (v01 00000001 00000000)
> ACPI: ASF! 000000007aaf8000 00095 (v32 HPQOEM 30E1 00000001 HP 00000001)
> ACPI: SSDT 000000007aad7000 0066C (v01 PmRef CpuPm 00003000 INTL 20060912)
> ACPI: SSDT 000000007aad6000 00288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
> ACPI: SSDT 000000007aad5000 00225 (v01 PmRef ApTst 00003000 INTL 20060912)
> ACPI: Local APIC address 0xfee00000
> No NUMA configuration found
> Faking a node at 0000000000000000-000000007ab00000
> Bootmem setup node 0 0000000000000000-000000007ab00000
> NODE_DATA [000000000000a000 - 000000000001efff]
> bootmap [000000000001f000 - 000000000002e55f] pages 10
> (8 early reservations) ==> bootmem [0000000000 - 007ab00000]
> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
> #2 [0000200000 - 0000bd11a0] TEXT DATA BSS ==> [0000200000 - 0000bd11a0]
> #3 [0077a8f000 - 0077d98445] RAMDISK ==> [0077a8f000 - 0077d98445]
> #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
> #5 [007493e000 - 007493e900] EFI memmap ==> [007493e000 - 007493e900]
> #6 [0000bd2000 - 0000bd21bc] BRK ==> [0000bd2000 - 0000bd21bc]
> #7 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
> [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
> Zone PFN ranges:
> DMA 0x00000000 -> 0x00001000
> DMA32 0x00001000 -> 0x00100000
> Normal 0x00100000 -> 0x00100000
> Movable zone start PFN for each node
> early_node_map[6] active PFN ranges
> 0: 0x00000000 -> 0x000000a0
> 0: 0x00000100 -> 0x00075a4c
> 0: 0x00075a4e -> 0x00076870
> 0: 0x00076880 -> 0x00078fb1
> 0: 0x000791b1 -> 0x0007a88f
> 0: 0x0007aaff -> 0x0007ab00
> On node 0 totalpages: 501278
> DMA zone: 56 pages used for memmap
> DMA zone: 2614 pages reserved
> DMA zone: 1330 pages, LIFO batch:0
> DMA32 zone: 6815 pages used for memmap
> DMA32 zone: 490463 pages, LIFO batch:31
> ACPI: PM-Timer IO Port: 0x408
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Using ACPI (MADT) for SMP configuration information
> ACPI: HPET id: 0x8086a201 base: 0xfed00000
> SMP: Allowing 4 CPUs, 2 hotplug CPUs
> nr_irqs_gsi: 24
> PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
> PM: Registered nosave memory: 0000000075a4c000 - 0000000075a4e000
> PM: Registered nosave memory: 0000000076870000 - 0000000076880000
> PM: Registered nosave memory: 0000000078fb1000 - 00000000791b1000
> PM: Registered nosave memory: 000000007a88f000 - 000000007a9cf000
> PM: Registered nosave memory: 000000007a9cf000 - 000000007aacf000
> PM: Registered nosave memory: 000000007aacf000 - 000000007aaff000
> Allocating PCI resources starting at 80000000 (gap: 7ab00000:8421c000)
> NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
> PERCPU: Embedded 27 pages at ffff880001010000, static data 79584 bytes
> Built 1 zonelists in Node order, mobility grouping on. Total pages: 491793
> Policy zone: DMA32
> Kernel command line: ro root=UUID=fd334e23-080a-449d-8993-07758e5cd581 rhgb quiet
> Initializing CPU#0
> NR_IRQS:4352 nr_irqs:440
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> Extended CMOS year: 2000
> Fast TSC calibration using PIT
> Detected 1197.010 MHz processor.
> Console: colour VGA+ 128x40
> console [tty0] enabled
> allocated 20971520 bytes of page_cgroup
> please try cgroup_disable=memory option if you don't want
> Checking aperture...
> No AGP bridge found
> Calgary: detecting Calgary via BIOS EBDA area
> Calgary: Unable to locate Rio Grande table in EBDA - bailing!
> Memory: 1942040k/2010112k available (4736k kernel code, 5000k absent, 63072k reserved, 2498k data, 1348k init)
> SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> hpet clockevent registered
> HPET: 4 timers in total, 0 timers will be used for per-cpu timer
> Calibrating delay loop (skipped), value calculated using timer frequency.. 2394.02 BogoMIPS (lpj=1197010)
> init_memory_mapping: 00000000fed1c000-00000000fed20000
> 00fed1c000 - 00fed20000 page 4k
> init_memory_mapping: 00000000fffa0000-00000000fffa7000
> 00fffa0000 - 00fffa7000 page 4k
> Security Framework initialized
> SELinux: Initializing.
> SELinux: Starting in permissive mode
> Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
> Mount-cache hash table entries: 256
> Initializing cgroup subsys ns
> Initializing cgroup subsys cpuacct
> Initializing cgroup subsys memory
> Initializing cgroup subsys devices
> Initializing cgroup subsys freezer
> Initializing cgroup subsys net_cls
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 3072K
> CPU 0/0x0 -> Node 0
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> CPU0: Thermal monitoring handled by SMI
> using mwait in idle threads.
> ACPI: Core revision 20090320
> ftrace: converting mcount calls to 0f 1f 44 00 00
> ftrace: allocating 19374 entries in 76 pages
> Setting APIC routing to flat
> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> CPU0: Intel(R) Core(TM)2 Duo CPU U9300 @ 1.20GHz stepping 06
> Booting processor 1 APIC 0x1 ip 0x6000
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 2393.88 BogoMIPS (lpj=1196943)
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 3072K
> CPU 1/0x1 -> Node 0
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> CPU1: Thermal monitoring enabled (TM2)
> x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> CPU1: Intel(R) Core(TM)2 Duo CPU U9300 @ 1.20GHz stepping 06
> checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> Brought up 2 CPUs
> Total of 2 processors activated (4787.90 BogoMIPS).
> sizeof(vma)=176 bytes
> sizeof(page)=56 bytes
> sizeof(inode)=576 bytes
> sizeof(dentry)=192 bytes
> sizeof(ext3inode)=784 bytes
> sizeof(buffer_head)=104 bytes
> sizeof(skbuff)=232 bytes
> sizeof(task_struct)=5960 bytes
> CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
> groups: 0 1
> CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
> groups: 1 0
> net_namespace: 1952 bytes
> Booting paravirtualized kernel on bare hardware
> regulator: core version 0.5
> Time: 13:56:42 Date: 10/19/09
> NET: Registered protocol family 16
> ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
> ACPI: bus type pci registered
> PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
> PCI: Not using MMCONFIG.
> PCI: Using configuration type 1 for base access
> bio: create slab <bio-0> at 0
> ACPI: EC: Look up EC in DSDT
> ACPI: BIOS _OSI(Linux) query ignored
> ACPI: EC: non-query interrupt received, switching to interrupt mode
> ACPI: Interpreter enabled
> ACPI: (supports S0 S3 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
> PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
> PCI: Using MMCONFIG at e0000000 - efffffff
> ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
> ACPI: EC: driver started in interrupt mode
> ACPI: Power Resource [APPR] (off)
> ACPI: No dock devices found.
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> DMAR: Forcing write-buffer flush capability
> pci 0000:00:02.0: reg 10 64bit mmio: [0x94000000-0x943fffff]
> pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff]
> pci 0000:00:02.0: reg 20 io port: [0x4138-0x413f]
> pci 0000:00:02.1: reg 10 64bit mmio: [0x94400000-0x944fffff]
> pci 0000:00:03.0: reg 10 64bit mmio: [0x94827000-0x9482700f]
> pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:03.0: PME# disabled
> pci 0000:00:03.2: reg 10 io port: [0x4130-0x4137]
> pci 0000:00:03.2: reg 14 io port: [0x414c-0x414f]
> pci 0000:00:03.2: reg 18 io port: [0x4128-0x412f]
> pci 0000:00:03.2: reg 1c io port: [0x4148-0x414b]
> pci 0000:00:03.2: reg 20 io port: [0x4100-0x410f]
> pci 0000:00:03.3: reg 10 io port: [0x4120-0x4127]
> pci 0000:00:03.3: reg 14 32bit mmio: [0x94825000-0x94825fff]
> pci 0000:00:19.0: reg 10 32bit mmio: [0x94800000-0x9481ffff]
> pci 0000:00:19.0: reg 14 32bit mmio: [0x94824000-0x94824fff]
> pci 0000:00:19.0: reg 18 io port: [0x40e0-0x40ff]
> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:19.0: PME# disabled
> pci 0000:00:1a.0: reg 20 io port: [0x40c0-0x40df]
> pci 0000:00:1a.1: reg 20 io port: [0x40a0-0x40bf]
> pci 0000:00:1a.2: reg 20 io port: [0x4080-0x409f]
> pci 0000:00:1a.7: reg 10 32bit mmio: [0x94826c00-0x94826fff]
> pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
> pci 0000:00:1a.7: PME# disabled
> pci 0000:00:1b.0: reg 10 64bit mmio: [0x94820000-0x94823fff]
> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1b.0: PME# disabled
> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.0: PME# disabled
> pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.1: PME# disabled
> pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.2: PME# disabled
> pci 0000:00:1d.0: reg 20 io port: [0x4060-0x407f]
> pci 0000:00:1d.1: reg 20 io port: [0x4040-0x405f]
> pci 0000:00:1d.2: reg 20 io port: [0x4020-0x403f]
> pci 0000:00:1d.7: reg 10 32bit mmio: [0x94826800-0x94826bff]
> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> pci 0000:00:1d.7: PME# disabled
> pci 0000:00:1f.2: reg 10 io port: [0x4118-0x411f]
> pci 0000:00:1f.2: reg 14 io port: [0x4144-0x4147]
> pci 0000:00:1f.2: reg 18 io port: [0x4110-0x4117]
> pci 0000:00:1f.2: reg 1c io port: [0x4140-0x4143]
> pci 0000:00:1f.2: reg 20 io port: [0x4000-0x401f]
> pci 0000:00:1f.2: reg 24 32bit mmio: [0x94826000-0x948267ff]
> pci 0000:00:1f.2: PME# supported from D3hot
> pci 0000:00:1f.2: PME# disabled
> pci 0000:00:1c.0: bridge 32bit mmio: [0x94700000-0x947fffff]
> pci 0000:02:00.0: reg 10 64bit mmio: [0x94600000-0x94601fff]
> pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
> pci 0000:02:00.0: PME# disabled
> pci 0000:00:1c.1: bridge 32bit mmio: [0x94600000-0x946fffff]
> pci 0000:00:1c.2: bridge io port: [0x2000-0x3fff]
> pci 0000:00:1c.2: bridge 32bit mmio: [0x90000000-0x93ffffff]
> pci 0000:44:06.0: reg 10 32bit mmio: [0x94500000-0x945007ff]
> pci 0000:44:06.0: supports D1 D2
> pci 0000:44:06.0: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:44:06.0: PME# disabled
> pci 0000:44:06.1: reg 10 32bit mmio: [0x94500900-0x945009ff]
> pci 0000:44:06.1: supports D1 D2
> pci 0000:44:06.1: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:44:06.1: PME# disabled
> pci 0000:44:06.2: reg 10 32bit mmio: [0x94500800-0x945008ff]
> pci 0000:44:06.2: supports D1 D2
> pci 0000:44:06.2: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:44:06.2: PME# disabled
> pci 0000:00:1e.0: transparent bridge
> pci 0000:00:1e.0: bridge 32bit mmio: [0x94500000-0x945fffff]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> SCSI subsystem initialized
> libata version 3.00 loaded.
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> PCI: Using ACPI for IRQ routing
> NetLabel: Initializing
> NetLabel: domain hash size = 128
> NetLabel: protocols = UNLABELED CIPSOv4
> NetLabel: unlabeled traffic allowed by default
> DMAR:Host address width 36
> DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb03000
> DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb01000
> DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb00000
> DMAR:DRHD (flags: 0x00000001)base: 0x00000000feb02000
> DMAR:RMRR base: 0x0000000076870000 end: 0x000000007687ffff
> DMAR:RMRR base: 0x000000007ac00000 end: 0x000000007effffff
> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> hpet0: 4 comparators, 64-bit 14.318180 MHz counter
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> alloc irq_desc for 23 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> pnp: PnP ACPI: found 12 devices
> ACPI: ACPI bus type pnp unregistered
> system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
> system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved
> system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
> system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
> system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
> system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
> system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
> system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
> system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
> system 00:07: ioport range 0x200-0x27f has been reserved
> system 00:07: ioport range 0x1000-0x1003 has been reserved
> system 00:07: ioport range 0x1010-0x101f has been reserved
> system 00:07: ioport range 0xffff-0xffff has been reserved
> system 00:07: ioport range 0x400-0x47f has been reserved
> system 00:07: ioport range 0x500-0x57f has been reserved
> system 00:07: ioport range 0xef80-0xef9f has been reserved
> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
> pci 0000:00:1c.0: IO window: disabled
> pci 0000:00:1c.0: MEM window: 0x94700000-0x947fffff
> pci 0000:00:1c.0: PREFETCH window: disabled
> pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
> pci 0000:00:1c.1: IO window: disabled
> pci 0000:00:1c.1: MEM window: 0x94600000-0x946fffff
> pci 0000:00:1c.1: PREFETCH window: disabled
> pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
> pci 0000:00:1c.2: IO window: 0x2000-0x3fff
> pci 0000:00:1c.2: MEM window: 0x90000000-0x93ffffff
> pci 0000:00:1c.2: PREFETCH window: disabled
> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:44
> pci 0000:00:1e.0: IO window: disabled
> pci 0000:00:1e.0: MEM window: 0x94500000-0x945fffff
> pci 0000:00:1e.0: PREFETCH window: disabled
> pci 0000:00:1c.0: enabling device (0000 -> 0002)
> alloc irq_desc for 16 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:1c.0: setting latency timer to 64
> alloc irq_desc for 17 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> pci 0000:00:1c.1: setting latency timer to 64
> pci 0000:00:1c.2: enabling device (0000 -> 0003)
> alloc irq_desc for 18 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> pci 0000:00:1c.2: setting latency timer to 64
> pci 0000:00:1e.0: setting latency timer to 64
> pci_bus 0000:00: resource 0 io: [0x00-0xffff]
> pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
> pci_bus 0000:01: resource 1 mem: [0x94700000-0x947fffff]
> pci_bus 0000:02: resource 1 mem: [0x94600000-0x946fffff]
> pci_bus 0000:03: resource 0 io: [0x2000-0x3fff]
> pci_bus 0000:03: resource 1 mem: [0x90000000-0x93ffffff]
> pci_bus 0000:44: resource 1 mem: [0x94500000-0x945fffff]
> pci_bus 0000:44: resource 3 io: [0x00-0xffff]
> pci_bus 0000:44: resource 4 mem: [0x000000-0xffffffffffffffff]
> NET: Registered protocol family 2
> IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 262144 bind 65536)
> TCP reno registered
> NET: Registered protocol family 1
> Trying to unpack rootfs image as initramfs...
> Switched to high resolution mode on CPU 1
> Switched to high resolution mode on CPU 0
> Freeing initrd memory: 3109k freed
> audit: initializing netlink socket (disabled)
> type=2000 audit(1255960602.522:1): initialized
> HugeTLB registered 2 MB page size, pre-allocated 0 pages
> VFS: Disk quotas dquot_6.5.2
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> msgmni has been set to 3799
> SELinux: Registering netfilter hooks
> alg: No test for stdrng (krng)
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pci 0000:00:02.0: Boot video device
> alloc irq_desc for 24 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
> pcieport-driver 0000:00:1c.0: setting latency timer to 64
> alloc irq_desc for 25 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
> pcieport-driver 0000:00:1c.1: setting latency timer to 64
> alloc irq_desc for 26 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
> pcieport-driver 0000:00:1c.2: setting latency timer to 64
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> Firmware did not grant requested _OSC control
> Firmware did not grant requested _OSC control
> Firmware did not grant requested _OSC control
> Firmware did not grant requested _OSC control
> Firmware did not grant requested _OSC control
> Firmware did not grant requested _OSC control
> pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> acpiphp_glue: can't get bus number, assuming 0
> acpiphp: Slot [1] registered
> efifb: invalid framebuffer address
> ACPI: AC Adapter [AC] (on-line)
> input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> ACPI: Power Button [PWRF]
> input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
> ACPI: Sleep Button [SLPB]
> input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
> ACPI: Lid Switch [LID]
> ACPI: SSDT 000000007a9c7c98 00233 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
> ACPI: SSDT 000000007a9c5618 0057B (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
> ACPI Warning (processor_throttling-0844): Invalid throttling state, reset [20090320]
> Monitor-Mwait will be used to enter C-1 state
> Monitor-Mwait will be used to enter C-2 state
> Marking TSC unstable due to TSC halts in idle
> ACPI: CPU0 (power states: C1[C1] C2[C2])
> processor ACPI_CPU:00: registered as cooling_device0
> ACPI: Processor [CPU0] (supports 8 throttling states)
> ACPI: SSDT 000000007a9c6e18 001D7 (v01 PmRef ApIst 00003000 INTL 20060912)
> ACPI: SSDT 000000007a9c7f18 0008D (v01 PmRef ApCst 00003000 INTL 20060912)
> ACPI Warning (processor_throttling-0844): Invalid throttling state, reset [20090320]
> ACPI: CPU1 (power states: C1[C1] C2[C2])
> processor ACPI_CPU:01: registered as cooling_device1
> ACPI: Processor [CPU1] (supports 8 throttling states)
> thermal LNXTHERM:01: registered as thermal_zone0
> ACPI: Thermal Zone [DTSZ] (39 C)
> thermal LNXTHERM:02: registered as thermal_zone1
> ACPI: Thermal Zone [BATZ] (27 C)
> thermal LNXTHERM:03: registered as thermal_zone2
> ACPI: Thermal Zone [CPUZ] (39 C)
> thermal LNXTHERM:04: registered as thermal_zone3
> ACPI: Thermal Zone [LOCZ] (37 C)
> thermal LNXTHERM:05: registered as thermal_zone4
> ACPI: Thermal Zone [SKNZ] (36 C)
> Non-volatile memory driver v1.3
> Linux agpgart interface v0.103
> agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
> agpgart-intel 0000:00:00.0: detected 65532K stolen memory
> agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
> Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> serial 0000:00:03.3: enabling device (0000 -> 0003)
> serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> 0000:00:03.3: ttyS0 at I/O 0x4120 (irq = 17) is a 16550A
> brd: module loaded
> loop: module loaded
> input: Macintosh mouse button emulation as /devices/virtual/input/input3
> Driver 'sd' needs updating - please use bus_type methods
> Driver 'sr' needs updating - please use bus_type methods
> ahci 0000:00:1f.2: version 3.0
> alloc irq_desc for 21 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
> alloc irq_desc for 27 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
> ahci: SSS flag set, parallel bus scan disabled
> ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
> ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems
> ahci 0000:00:1f.2: setting latency timer to 64
> scsi0 : ahci
> scsi1 : ahci
> scsi2 : ahci
> scsi3 : ahci
> ata1: SATA max UDMA/133 abar m2048@0x94826000 port 0x94826100 irq 27
> ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 27
> ata3: DUMMY
> ata4: DUMMY
> Fixed MDIO Bus: probed
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> ehci_hcd 0000:00:1a.7: enabling device (0000 -> 0002)
> alloc irq_desc for 19 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
> ehci_hcd 0000:00:1a.7: setting latency timer to 64
> ehci_hcd 0000:00:1a.7: EHCI Host Controller
> ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:1a.7: debug port 1
> ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
> ehci_hcd 0000:00:1a.7: irq 19, io mem 0x94826c00
> ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: EHCI Host Controller
> usb usb1: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 ehci_hcd
> usb usb1: SerialNumber: 0000:00:1a.7
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 6 ports detected
> ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002)
> alloc irq_desc for 20 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
> ehci_hcd 0000:00:1d.7: setting latency timer to 64
> ehci_hcd 0000:00:1d.7: EHCI Host Controller
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
> ehci_hcd 0000:00:1d.7: debug port 1
> ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
> ehci_hcd 0000:00:1d.7: irq 20, io mem 0x94826800
> ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb2: Product: EHCI Host Controller
> usb usb2: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 ehci_hcd
> usb usb2: SerialNumber: 0000:00:1d.7
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 6 ports detected
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> uhci_hcd: USB Universal Host Controller Interface driver
> uhci_hcd 0000:00:1a.0: enabling device (0000 -> 0001)
> uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> uhci_hcd 0000:00:1a.0: setting latency timer to 64
> uhci_hcd 0000:00:1a.0: UHCI Host Controller
> uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040c0
> usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb3: Product: UHCI Host Controller
> usb usb3: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 uhci_hcd
> usb usb3: SerialNumber: 0000:00:1a.0
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1a.1: enabling device (0000 -> 0001)
> uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> uhci_hcd 0000:00:1a.1: setting latency timer to 64
> uhci_hcd 0000:00:1a.1: UHCI Host Controller
> uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:1a.1: irq 17, io base 0x000040a0
> usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb4: Product: UHCI Host Controller
> usb usb4: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 uhci_hcd
> usb usb4: SerialNumber: 0000:00:1a.1
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1a.2: enabling device (0000 -> 0001)
> uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> uhci_hcd 0000:00:1a.2: setting latency timer to 64
> uhci_hcd 0000:00:1a.2: UHCI Host Controller
> uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
> uhci_hcd 0000:00:1a.2: irq 18, io base 0x00004080
> usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb5: Product: UHCI Host Controller
> usb usb5: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 uhci_hcd
> usb usb5: SerialNumber: 0000:00:1a.2
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1d.0: enabling device (0000 -> 0001)
> uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> uhci_hcd 0000:00:1d.0: setting latency timer to 64
> uhci_hcd 0000:00:1d.0: UHCI Host Controller
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
> uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060
> usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb6: Product: UHCI Host Controller
> usb usb6: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 uhci_hcd
> usb usb6: SerialNumber: 0000:00:1d.0
> usb usb6: configuration #1 chosen from 1 choice
> hub 6-0:1.0: USB hub found
> hub 6-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1d.1: enabling device (0000 -> 0001)
> alloc irq_desc for 22 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
> uhci_hcd 0000:00:1d.1: setting latency timer to 64
> uhci_hcd 0000:00:1d.1: UHCI Host Controller
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
> uhci_hcd 0000:00:1d.1: irq 22, io base 0x00004040
> usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb7: Product: UHCI Host Controller
> usb usb7: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 uhci_hcd
> usb usb7: SerialNumber: 0000:00:1d.1
> usb usb7: configuration #1 chosen from 1 choice
> hub 7-0:1.0: USB hub found
> hub 7-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1d.2: enabling device (0000 -> 0001)
> uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> uhci_hcd 0000:00:1d.2: setting latency timer to 64
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
> uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004020
> usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb8: Product: UHCI Host Controller
> usb usb8: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 uhci_hcd
> usb usb8: SerialNumber: 0000:00:1d.2
> usb usb8: configuration #1 chosen from 1 choice
> hub 8-0:1.0: USB hub found
> hub 8-0:1.0: 2 ports detected
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> i8042.c: Detected active multiplexing controller, rev 1.1.
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX0 port at 0x60,0x64 irq 12
> serio: i8042 AUX1 port at 0x60,0x64 irq 12
> serio: i8042 AUX2 port at 0x60,0x64 irq 12
> serio: i8042 AUX3 port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> rtc_cmos 00:08: RTC can wake from S4
> rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
> rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
> device-mapper: uevent: version 1.0.3
> device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
> cpuidle: using governor ladder
> cpuidle: using governor menu
> EFI Variables Facility v0.08 2004-May-17
> input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
> ACPI: Battery Slot [BAT0] (battery present)
> usbcore: registered new interface driver hiddev
> usbcore: registered new interface driver usbhid
> usbhid: v2.6:USB HID core driver
> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
> nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
> sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
> ip_tables: (C) 2000-2006 Netfilter Core Team
> TCP cubic registered
> Initializing XFRM netlink socket
> NET: Registered protocol family 17
> PM: Resume from disk failed.
> registered taskstats version 1
> Magic number: 13:720:938
> Initalizing network drop monitor service
> usb 1-2: new high speed USB device using ehci_hcd and address 3
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
> ata1.00: ATA-8: SAMSUNG HS08XJF, 3AA10050, max UDMA/100
> ata1.00: 156301488 sectors, multi 16: LBA48
> ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
> ata1.00: configured for UDMA/100
> scsi 0:0:0:0: Direct-Access ATA SAMSUNG HS08XJF 3AA1 PQ: 0 ANSI: 5
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
> usb 1-2: New USB device found, idVendor=03f0, idProduct=201d
> usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
> usb 1-2: Product: HP un2400 Mobile Broadband Module
> usb 1-2: Manufacturer: HP un2400 Mobile Broadband Module
> usb 1-2: configuration #1 chosen from 1 choice
> sd 0:0:0:0: [sda] Attached SCSI disk
> input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input5
> usb 1-5: new high speed USB device using ehci_hcd and address 5
> Clocksource tsc unstable (delta = -213797952 ns)
> usb 1-5: New USB device found, idVendor=04f2, idProduct=b082
> usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
> usb 1-5: Product: CKA7227
> usb 1-5: Manufacturer: Chicony Electronics Co., Ltd.
> usb 1-5: SerialNumber: SN0001
> usb 1-5: configuration #1 chosen from 1 choice
> usb 3-1: new full speed USB device using uhci_hcd and address 2
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
> ata2.00: ATAPI: Optiarc DVD RW AD-7910S, 1.81, max UDMA/100
> ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
> ata2.00: configured for UDMA/100
> usb 3-1: New USB device found, idVendor=03f0, idProduct=171d
> usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 3-1: Product: HP Integrated Module
> usb 3-1: Manufacturer: Broadcom Corp
> usb 3-1: configuration #1 chosen from 1 choice
> scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7910S 1.81 PQ: 0 ANSI: 5
> sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 1:0:0:0: Attached scsi CD-ROM sr0
> sr 1:0:0:0: Attached scsi generic sg1 type 5
> Freeing unused kernel memory: 1348k freed
> Write protecting the kernel read-only data: 6728k
> Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa00000
> input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
> usb 4-1: new full speed USB device using uhci_hcd and address 2
> usb 4-1: New USB device found, idVendor=08ff, idProduct=2810
> usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
> usb 4-1: Product: Fingerprint Sensor
> usb 4-1: configuration #1 chosen from 1 choice
> [drm] Initialized drm 1.1.0 20060810
> i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> i915 0000:00:02.0: setting latency timer to 64
> alloc irq_desc for 28 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> i915 0000:00:02.0: irq 28 for MSI/MSI-X
> [drm] TV-13: set mode NTSC 480i 0
> allocated 1280x800 fb: 0x04020000, bo ffff8800778e3a80
> Console: switching to colour frame buffer device 160x50
> [drm] LVDS-8: set mode 1280x800 15
> fb0: inteldrmfb frame buffer device
> registered panic notifier
> acpi device:07: registered as cooling_device2
> input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/input/input7
> ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
> [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> type=1404 audit(1255960606.220:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
> SELinux: 8192 avtab hash slots, 130119 rules.
> SELinux: 8192 avtab hash slots, 130119 rules.
> SELinux: 8 users, 12 roles, 2769 types, 129 bools, 1 sens, 1024 cats
> SELinux: 74 classes, 130119 rules
> SELinux: Completing initialization.
> SELinux: Setting up existing superblocks.
> SELinux: initialized (dev sda1, type ext3), uses xattr
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
> SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
> SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
> SELinux: initialized (dev devpts, type devpts), uses transition SIDs
> SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
> SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
> SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
> SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
> SELinux: initialized (dev proc, type proc), uses genfs_contexts
> SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
> SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> type=1403 audit(1255960606.737:3): policy loaded auid=4294967295 ses=4294967295
> udev: starting version 141
> usbcore: registered new interface driver usbserial
> USB Serial support registered for generic
> usbcore: registered new interface driver usbserial_generic
> usbserial: USB Serial Driver core
> USB Serial support registered for Qualcomm USB modem
> qcserial 1-2:1.0: Qualcomm USB modem converter detected
> usb 1-2: Qualcomm USB modem converter now attached to ttyUSB0
> usbcore: registered new interface driver qcserial
> Linux video capture interface: v2.00
> uvcvideo: Found UVC 1.00 device CKA7227 (04f2:b082)
> input: CKA7227 as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input8
> usbcore: registered new interface driver uvcvideo
> USB Video Class driver (v0.1.0)
> cfg80211: Calling CRDA to update world regulatory domain
> Bluetooth: Core ver 2.15
> NET: Registered protocol family 31
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> pata_acpi 0000:00:03.2: enabling device (0000 -> 0001)
> pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> pata_acpi 0000:00:03.2: setting latency timer to 64
> pata_acpi 0000:00:03.2: PCI INT C disabled
> ACPI: WMI: Mapper loaded
> iTCO_vendor_support: vendor-support=0
> lib80211: common routines for IEEE802.11 drivers
> lib80211_crypt: registered algorithm 'NULL'
> ricoh-mmc: Ricoh MMC Controller disabling driver
> ricoh-mmc: Copyright(c) Philip Langdale
> ricoh-mmc: Ricoh MMC controller found at 0000:44:06.2 [1180:0843] (rev 12)
> ricoh-mmc: Controller is now disabled.
> input: PC Speaker as /devices/platform/pcspkr/input/input9
> iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
> iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
> iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> lis3lv02d: laptop model unknown, using default axes configuration
> lis3lv02d: 1-byte sensor found
> input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input10
> lis3_init_device: irq 23
> lis3: registering device
> Registered led device: hp::hddprotect
> lis3lv02d driver loaded.
> Bluetooth: Generic Bluetooth USB driver ver 0.5
> usbcore: registered new interface driver btusb
> e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
> e1000e: Copyright (c) 1999-2008 Intel Corporation.
> e1000e 0000:00:19.0: enabling device (0000 -> 0002)
> e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> e1000e 0000:00:19.0: setting latency timer to 64
> alloc irq_desc for 29 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
> tpm_inf_pnp 00:04: Found GTPM with ID IFX0102
> tpm_inf_pnp 00:04: TPM found: config base 0xfe00, data base 0xfe80, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
> SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
> 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:23:5a:34:9e:20
> 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
> 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1052ff-0ff
> sdhci: Secure Digital Host Controller Interface driver
> sdhci: Copyright(c) Pierre Ossman
> sdhci-pci 0000:44:06.1: SDHCI controller found [1180:0822] (rev 22)
> sdhci-pci 0000:44:06.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
> Registered led device: mmc0::
> mmc0: SDHCI controller on PCI [0000:44:06.1] using PIO
> iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds
> iwlagn: Copyright(c) 2003-2009 Intel Corporation
> iwlagn 0000:02:00.0: enabling device (0000 -> 0002)
> iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> iwlagn 0000:02:00.0: setting latency timer to 64
> iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
> iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
> alloc irq_desc for 30 on cpu 0 node 0
> alloc kstat_irqs on cpu 0 node 0
> iwlagn 0000:02:00.0: irq 30 for MSI/MSI-X
> firewire_ohci 0000:44:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> firewire_ohci 0000:44:06.0: setting latency timer to 64
> firewire_ohci: Added fw-ohci device 0000:44:06.0, OHCI version 1.10
> phy0: Selected rate control algorithm 'iwl-agn-rs'
> firewire_core: created device fw0: GUID 5566778811223344, S400
> HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
> HDA Intel 0000:00:1b.0: enabling device (0000 -> 0002)
> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> HDA Intel 0000:00:1b.0: setting latency timer to 64
> input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
> cfg80211: World regulatory domain updated:
> (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
> (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
> (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> device-mapper: multipath: version 1.0.5 loaded
> EXT3 FS on sda1, internal journal
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev sda3, type vfat), uses genfs_contexts
> Adding 2047992k swap on /dev/sda2. Priority:-1 extents:1 across:2047992k
> SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>
> --
> Matthew Garrett | mjg59@xxxxxxxxxxxxx
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
Matthew Garrett | mjg59@xxxxxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/