[PATCH 2/3 v2] lirc driver for Windows MCE IR transceivers

From: Jarod Wilson
Date: Tue Oct 20 2009 - 10:02:46 EST

lirc driver for Windows Media Center Ed. IR transceivers

Successfully tested with the mce v2 transceiver and remote that shipped with a
Hauppauge HVR-1500 expresscard tuner and an mce v1 transceiver from an old HP
Media Center system.

Changes from prior submission:
- both v1 and v2 transceivers supported by one driver now
- transmit works on the v1 devices
- support for several new devices
- now uses dev_dbg (and friends) instead of its own dprintk

Signed-off-by: Jarod Wilson <jarod@xxxxxxxxxx>
Signed-off-by: Janne Grunau <j@xxxxxxxxxx>
CC: Christoph Bartelmus <lirc@xxxxxxxxxxxx>
Tested-by: Jarod Wilson <jarod@xxxxxxxxxx>

---
drivers/input/lirc/Kconfig | 6
drivers/input/lirc/Makefile | 1
drivers/input/lirc/lirc_mceusb.c | 1235 +++++++++++++++++++++++++++++++++++++++
3 files changed, 1241 insertions(+), 1 deletion(-)

Index: b/drivers/input/lirc/Kconfig
===================================================================
--- a/drivers/input/lirc/Kconfig
+++ b/drivers/input/lirc/Kconfig
@@ -11,6 +11,10 @@ menuconfig INPUT_LIRC

if INPUT_LIRC

-# Device-specific drivers go here
+config LIRC_MCEUSB
+ tristate "Windows Media Center Ed. USB IR Transceiver"
+ depends on LIRC_DEV && USB
+ help
+ Driver for Windows Media Center Ed. USB IR Transceivers

endif
Index: b/drivers/input/lirc/Makefile
===================================================================
--- a/drivers/input/lirc/Makefile
+++ b/drivers/input/lirc/Makefile
@@ -4,3 +4,4 @@
# Each configuration option enables a list of files.

obj-$(CONFIG_INPUT_LIRC) += lirc_dev.o
+obj-$(CONFIG_LIRC_MCEUSB) += lirc_mceusb.o
Index: b/drivers/input/lirc/lirc_mceusb.c
===================================================================
--- /dev/null
+++ b/drivers/input/lirc/lirc_mceusb.c
@@ -0,0 +1,1235 @@
+/*
+ * LIRC driver for Windows Media Center Edition USB Infrared Transceivers
+ *
+ * (C) by Martin A. Blatter <martin_a_blatter@xxxxxxxxx>
+ *
+ * Transmitter support and reception code cleanup.
+ * (C) by Daniel Melander <lirc@xxxxxxxxxx>
+ *
+ * Original lirc_mceusb driver for 1st-gen device:
+ * Copyright (c) 2003-2004 Dan Conti <dconti@xxxxxxxxxxx>
+ *
+ * Original lirc_mceusb driver deprecated in favor of this driver, which
+ * supports the 1st-gen device now too. Transmitting on the 1st-gen device
+ * only functions on port #2 at the moment.
+ *
+ * Support for 1st-gen device added June 2009,
+ * by Jarod Wilson <jarod@xxxxxxxxxxxx>
+ *
+ * Initial transmission support for 1st-gen device added August 2009,
+ * by Patrick Calhoun <phineas@xxxxxx>
+ *
+ * Derived from ATI USB driver by Paul Miller and the original
+ * MCE USB driver by Dan Conti (and now including chunks of the latter
+ * relevant to the 1st-gen device initialization)
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/smp_lock.h>
+#include <linux/completion.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/wait.h>
+#include <linux/time.h>
+
+#include "lirc.h"
+#include "lirc_dev.h"
+
+#define DRIVER_VERSION "1.90"
+#define DRIVER_AUTHOR "Daniel Melander <lirc@xxxxxxxxxx>, " \
+ "Martin Blatter <martin_a_blatter@xxxxxxxxx>, " \
+ "Dan Conti <dconti@xxxxxxxxxxx>"
+#define DRIVER_DESC "Windows Media Center Edition USB IR Transceiver " \
+ "driver for LIRC"
+#define DRIVER_NAME "lirc_mceusb"
+
+#define USB_BUFLEN 32 /* USB reception buffer length */
+#define LIRCBUF_SIZE 256 /* LIRC work buffer length */
+
+/* MCE constants */
+#define MCE_CMDBUF_SIZE 384 /* MCE Command buffer length */
+#define MCE_TIME_UNIT 50 /* Approx 50us resolution */
+#define MCE_CODE_LENGTH 5 /* Normal length of packet (with header) */
+#define MCE_PACKET_SIZE 4 /* Normal length of packet (without header) */
+#define MCE_PACKET_HEADER 0x84 /* Actual header format is 0x80 + num_bytes */
+#define MCE_CONTROL_HEADER 0x9F /* MCE status header */
+#define MCE_TX_HEADER_LENGTH 3 /* # of bytes in the initializing tx header */
+#define MCE_MAX_CHANNELS 2 /* Two transmitters, hardware dependent? */
+#define MCE_DEFAULT_TX_MASK 0x03 /* Val opts: TX1=0x01, TX2=0x02, ALL=0x03 */
+#define MCE_PULSE_BIT 0x80 /* Pulse bit, MSB set == PULSE else SPACE */
+#define MCE_PULSE_MASK 0x7F /* Pulse mask */
+#define MCE_MAX_PULSE_LENGTH 0x7F /* Longest transmittable pulse symbol */
+#define MCE_PACKET_LENGTH_MASK 0x7F /* Pulse mask */
+
+
+/* module parameters */
+#ifdef CONFIG_USB_DEBUG
+static int debug = 1;
+#else
+static int debug;
+#endif
+
+/* general constants */
+#define SEND_FLAG_IN_PROGRESS 1
+#define SEND_FLAG_COMPLETE 2
+#define RECV_FLAG_IN_PROGRESS 3
+#define RECV_FLAG_COMPLETE 4
+
+#define MCEUSB_INBOUND 1
+#define MCEUSB_OUTBOUND 2
+
+#define VENDOR_PHILIPS 0x0471
+#define VENDOR_SMK 0x0609
+#define VENDOR_TATUNG 0x1460
+#define VENDOR_GATEWAY 0x107b
+#define VENDOR_SHUTTLE 0x1308
+#define VENDOR_SHUTTLE2 0x051c
+#define VENDOR_MITSUMI 0x03ee
+#define VENDOR_TOPSEED 0x1784
+#define VENDOR_RICAVISION 0x179d
+#define VENDOR_ITRON 0x195d
+#define VENDOR_FIC 0x1509
+#define VENDOR_LG 0x043e
+#define VENDOR_MICROSOFT 0x045e
+#define VENDOR_FORMOSA 0x147a
+#define VENDOR_FINTEK 0x1934
+#define VENDOR_PINNACLE 0x2304
+#define VENDOR_ECS 0x1019
+#define VENDOR_WISTRON 0x0fb8
+#define VENDOR_COMPRO 0x185b
+#define VENDOR_NORTHSTAR 0x04eb
+
+static struct usb_device_id mceusb_dev_table[] = {
+ /* Original Microsoft MCE IR Transceiver (often HP-branded) */
+ { USB_DEVICE(VENDOR_MICROSOFT, 0x006d) },
+ /* Philips Infrared Transceiver - Sahara branded */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x0608) },
+ /* Philips Infrared Transceiver - HP branded */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x060c) },
+ /* Philips SRM5100 */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x060d) },
+ /* Philips Infrared Transceiver - Omaura */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x060f) },
+ /* Philips Infrared Transceiver - Spinel plus */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x0613) },
+ /* Philips eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x0815) },
+ /* SMK/Toshiba G83C0004D410 */
+ { USB_DEVICE(VENDOR_SMK, 0x031d) },
+ /* SMK eHome Infrared Transceiver (Sony VAIO) */
+ { USB_DEVICE(VENDOR_SMK, 0x0322) },
+ /* bundled with Hauppauge PVR-150 */
+ { USB_DEVICE(VENDOR_SMK, 0x0334) },
+ /* Tatung eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_TATUNG, 0x9150) },
+ /* Shuttle eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_SHUTTLE, 0xc001) },
+ /* Shuttle eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_SHUTTLE2, 0xc001) },
+ /* Gateway eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_GATEWAY, 0x3009) },
+ /* Mitsumi */
+ { USB_DEVICE(VENDOR_MITSUMI, 0x2501) },
+ /* Topseed eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_TOPSEED, 0x0001) },
+ /* Topseed HP eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_TOPSEED, 0x0006) },
+ /* Topseed eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_TOPSEED, 0x0007) },
+ /* Topseed eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_TOPSEED, 0x0008) },
+ /* Topseed eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_TOPSEED, 0x000a) },
+ /* Ricavision internal Infrared Transceiver */
+ { USB_DEVICE(VENDOR_RICAVISION, 0x0010) },
+ /* Itron ione Libra Q-11 */
+ { USB_DEVICE(VENDOR_ITRON, 0x7002) },
+ /* FIC eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_FIC, 0x9242) },
+ /* LG eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_LG, 0x9803) },
+ /* Microsoft MCE Infrared Transceiver */
+ { USB_DEVICE(VENDOR_MICROSOFT, 0x00a0) },
+ /* Formosa eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_FORMOSA, 0xe015) },
+ /* Formosa21 / eHome Infrared Receiver */
+ { USB_DEVICE(VENDOR_FORMOSA, 0xe016) },
+ /* Formosa aim / Trust MCE Infrared Receiver */
+ { USB_DEVICE(VENDOR_FORMOSA, 0xe017) },
+ /* Formosa Industrial Computing / Beanbag Emulation Device */
+ { USB_DEVICE(VENDOR_FORMOSA, 0xe018) },
+ /* Formosa21 / eHome Infrared Receiver */
+ { USB_DEVICE(VENDOR_FORMOSA, 0xe03a) },
+ /* Formosa Industrial Computing AIM IR605/A */
+ { USB_DEVICE(VENDOR_FORMOSA, 0xe03c) },
+ /* Fintek eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_FINTEK, 0x0602) },
+ /* Fintek eHome Infrared Transceiver (in the AOpen MP45) */
+ { USB_DEVICE(VENDOR_FINTEK, 0x0702) },
+ /* Pinnacle Remote Kit */
+ { USB_DEVICE(VENDOR_PINNACLE, 0x0225) },
+ /* Elitegroup Computer Systems IR */
+ { USB_DEVICE(VENDOR_ECS, 0x0f38) },
+ /* Wistron Corp. eHome Infrared Receiver */
+ { USB_DEVICE(VENDOR_WISTRON, 0x0002) },
+ /* Compro K100 */
+ { USB_DEVICE(VENDOR_COMPRO, 0x3020) },
+ /* Compro K100 v2 */
+ { USB_DEVICE(VENDOR_COMPRO, 0x3082) },
+ /* Northstar Systems, Inc. eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_NORTHSTAR, 0xe004) },
+ /* Terminating entry */
+ { }
+};
+
+static struct usb_device_id pinnacle_list[] = {
+ { USB_DEVICE(VENDOR_PINNACLE, 0x0225) },
+ {}
+};
+
+static struct usb_device_id microsoft_gen1_list[] = {
+ { USB_DEVICE(VENDOR_MICROSOFT, 0x006d) },
+ {}
+};
+
+static struct usb_device_id transmitter_mask_list[] = {
+ { USB_DEVICE(VENDOR_MICROSOFT, 0x006d) },
+ { USB_DEVICE(VENDOR_SMK, 0x031d) },
+ { USB_DEVICE(VENDOR_SMK, 0x0322) },
+ { USB_DEVICE(VENDOR_SMK, 0x0334) },
+ { USB_DEVICE(VENDOR_TOPSEED, 0x0001) },
+ { USB_DEVICE(VENDOR_TOPSEED, 0x0006) },
+ { USB_DEVICE(VENDOR_TOPSEED, 0x0007) },
+ { USB_DEVICE(VENDOR_TOPSEED, 0x0008) },
+ { USB_DEVICE(VENDOR_TOPSEED, 0x000a) },
+ { USB_DEVICE(VENDOR_PINNACLE, 0x0225) },
+ {}
+};
+
+/* data structure for each usb transceiver */
+struct mceusb_dev {
+
+ /* usb */
+ struct usb_device *usbdev;
+ struct urb *urb_in;
+ int devnum;
+ struct usb_endpoint_descriptor *usb_ep_in;
+ struct usb_endpoint_descriptor *usb_ep_out;
+
+ /* buffers and dma */
+ unsigned char *buf_in;
+ unsigned int len_in;
+ dma_addr_t dma_in;
+ dma_addr_t dma_out;
+ unsigned int overflow_len;
+
+ /* lirc */
+ struct lirc_driver *d;
+ int lircdata;
+ unsigned char is_pulse;
+ struct {
+ u32 connected:1;
+ u32 pinnacle:1;
+ u32 transmitter_mask_inverted:1;
+ u32 microsoft_gen1:1;
+ u32 reserved:28;
+ } flags;
+
+ unsigned char transmitter_mask;
+ unsigned int carrier_freq;
+
+ /* handle sending (init strings) */
+ int send_flags;
+ wait_queue_head_t wait_out;
+
+ struct mutex lock;
+};
+
+/* init strings */
+static char init1[] = {0x00, 0xff, 0xaa, 0xff, 0x0b};
+static char init2[] = {0xff, 0x18};
+
+static char pin_init1[] = { 0x9f, 0x07};
+static char pin_init2[] = { 0x9f, 0x13};
+static char pin_init3[] = { 0x9f, 0x0d};
+
+static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf, int len)
+{
+ char codes[USB_BUFLEN * 3 + 1];
+ int i;
+
+ if (len <= 0)
+ return;
+
+ if (ir->flags.microsoft_gen1 && len <= 2)
+ return;
+
+ for (i = 0; i < len && i < USB_BUFLEN; i++)
+ snprintf(codes + i * 3, 4, "%02x ", buf[i] & 0xFF);
+
+ dev_info(ir->d->dev, "data received %s (length=%d)\n", codes, len);
+}
+
+static void usb_async_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct mceusb_dev *ir;
+ int len;
+
+ if (!urb)
+ return;
+
+ ir = urb->context;
+ if (ir) {
+ len = urb->actual_length;
+
+ dev_dbg(ir->d->dev, "callback called (status=%d len=%d)\n",
+ urb->status, len);
+
+ if (debug)
+ mceusb_dev_printdata(ir, urb->transfer_buffer, len);
+ }
+
+}
+
+/* request incoming or send outgoing usb packet - used to initialize remote */
+static void request_packet_async(struct mceusb_dev *ir,
+ struct usb_endpoint_descriptor *ep,
+ unsigned char *data, int size, int urb_type)
+{
+ int res;
+ struct urb *async_urb;
+ unsigned char *async_buf;
+
+ if (urb_type) {
+ async_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (unlikely(!async_urb))
+ return;
+
+ async_buf = kmalloc(size, GFP_KERNEL);
+ if (!async_buf) {
+ usb_free_urb(async_urb);
+ return;
+ }
+
+ if (urb_type == MCEUSB_OUTBOUND) {
+ /* outbound data */
+ usb_fill_int_urb(async_urb, ir->usbdev,
+ usb_sndintpipe(ir->usbdev,
+ ep->bEndpointAddress),
+ async_buf, size,
+ (usb_complete_t) usb_async_callback,
+ ir, ep->bInterval);
+ memcpy(async_buf, data, size);
+ } else {
+ /* inbound data */
+ usb_fill_int_urb(async_urb, ir->usbdev,
+ usb_rcvintpipe(ir->usbdev,
+ ep->bEndpointAddress),
+ async_buf, size,
+ (usb_complete_t) usb_async_callback,
+ ir, ep->bInterval);
+ }
+
+ } else {
+ /* standard request */
+ async_urb = ir->urb_in;
+ ir->send_flags = RECV_FLAG_IN_PROGRESS;
+ }
+
+ dev_dbg(ir->d->dev, "receive request called (size=%#x)\n", size);
+
+ async_urb->transfer_buffer_length = size;
+ async_urb->dev = ir->usbdev;
+
+ res = usb_submit_urb(async_urb, GFP_ATOMIC);
+ if (res) {
+ dev_dbg(ir->d->dev, "receive request FAILED! (res=%d)\n", res);
+ return;
+ }
+ dev_dbg(ir->d->dev, "receive request complete (res=%d)\n", res);
+}
+
+static int unregister_from_lirc(struct mceusb_dev *ir)
+{
+ struct lirc_driver *d = ir->d;
+ int devnum;
+ int rtn;
+
+ devnum = ir->devnum;
+ dev_dbg(ir->d->dev, "unregister from lirc called\n");
+
+ rtn = lirc_unregister_driver(d->minor);
+ if (rtn > 0) {
+ dev_info(ir->d->dev, "error in lirc_unregister minor: %d\n"
+ "Trying again...\n", d->minor);
+ if (rtn == -EBUSY) {
+ dev_info(ir->d->dev, "device is opened, will "
+ "unregister on close\n");
+ return -EAGAIN;
+ }
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ);
+
+ rtn = lirc_unregister_driver(d->minor);
+ if (rtn > 0)
+ dev_info(ir->d->dev, "lirc_unregister failed\n");
+ }
+
+ if (rtn) {
+ dev_info(ir->d->dev, "didn't free resources\n");
+ return -EAGAIN;
+ }
+
+ dev_info(ir->d->dev, "usb remote disconnected\n");
+
+ lirc_buffer_free(d->rbuf);
+ kfree(d->rbuf);
+ kfree(d);
+ kfree(ir);
+ return 0;
+}
+
+static int mceusb_ir_open(void *data)
+{
+ struct mceusb_dev *ir = data;
+
+ if (!ir) {
+ printk(KERN_WARNING DRIVER_NAME
+ "[?]: %s called with no context\n", __func__);
+ return -EIO;
+ }
+
+ dev_dbg(ir->d->dev, "mceusb IR device opened\n");
+
+ if (!ir->flags.connected) {
+ if (!ir->usbdev)
+ return -ENOENT;
+ ir->flags.connected = 1;
+ }
+
+ return 0;
+}
+
+static void mceusb_ir_close(void *data)
+{
+ struct mceusb_dev *ir = data;
+
+ if (!ir) {
+ printk(KERN_WARNING DRIVER_NAME
+ "[?]: %s called with no context\n", __func__);
+ return;
+ }
+
+ dev_dbg(ir->d->dev, "mceusb IR device closed\n");
+
+ if (ir->flags.connected) {
+ mutex_lock(&ir->lock);
+ ir->flags.connected = 0;
+ mutex_unlock(&ir->lock);
+ }
+}
+
+static void send_packet_to_lirc(struct mceusb_dev *ir)
+{
+ if (ir->lircdata) {
+ lirc_buffer_write(ir->d->rbuf,
+ (unsigned char *) &ir->lircdata);
+ wake_up(&ir->d->rbuf->wait_poll);
+ ir->lircdata = 0;
+ }
+}
+
+static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
+{
+ int i, j;
+ int packet_len = 0;
+ int start_index = 0;
+
+ /* skip meaningless 0xb1 0x60 header bytes on orig receiver */
+ if (ir->flags.microsoft_gen1)
+ start_index = 2;
+
+ /* this should only trigger w/the 1st-gen mce receiver */
+ for (i = start_index; i < (start_index + ir->overflow_len) &&
+ i < buf_len; i++) {
+ /* rising/falling flank */
+ if (ir->is_pulse != (ir->buf_in[i] & MCE_PULSE_BIT)) {
+ send_packet_to_lirc(ir);
+ ir->is_pulse = ir->buf_in[i] & MCE_PULSE_BIT;
+ }
+
+ /* accumulate mce pulse/space values */
+ ir->lircdata += (ir->buf_in[i] & MCE_PULSE_MASK) *
+ MCE_TIME_UNIT;
+ ir->lircdata |= (ir->is_pulse ? PULSE_BIT : 0);
+ }
+ start_index += ir->overflow_len;
+ ir->overflow_len = 0;
+
+ for (i = start_index; i < buf_len; i++) {
+ /* decode mce packets of the form (84),AA,BB,CC,DD */
+
+ /* data headers */
+ if (ir->buf_in[i] >= 0x80 && ir->buf_in[i] <= 0x9e) {
+ /* decode packet data */
+ packet_len = ir->buf_in[i] & MCE_PACKET_LENGTH_MASK;
+ ir->overflow_len = i + 1 + packet_len - buf_len;
+ for (j = 1; j <= packet_len && (i + j < buf_len); j++) {
+ /* rising/falling flank */
+ if (ir->is_pulse !=
+ (ir->buf_in[i + j] & MCE_PULSE_BIT)) {
+ send_packet_to_lirc(ir);
+ ir->is_pulse =
+ ir->buf_in[i + j] &
+ MCE_PULSE_BIT;
+ }
+
+ /* accumulate mce pulse/space values */
+ ir->lircdata +=
+ (ir->buf_in[i + j] & MCE_PULSE_MASK) *
+ MCE_TIME_UNIT;
+ ir->lircdata |= (ir->is_pulse ? PULSE_BIT : 0);
+ }
+
+ i += packet_len;
+
+ /* status header (0x9F) */
+ } else if (ir->buf_in[i] == MCE_CONTROL_HEADER) {
+ /*
+ * A transmission containing one or more consecutive ir
+ * commands always ends with a GAP of 100ms followed by
+ * the sequence 0x9F 0x01 0x01 0x9F 0x15 0x00 0x00 0x80
+ */
+
+#if 0
+ Uncomment this if the last 100ms "infinity"-space should be transmitted
+ to lirc directly instead of at the beginning of the next transmission.
+ Changes pulse/space order.
+
+ if (++i < buf_len && ir->buf_in[i] == 0x01)
+ send_packet_to_lirc(ir);
+
+#endif
+
+ /* end decode loop */
+ dev_dbg(ir->d->dev, "[%d] %s: found control header\n",
+ ir->devnum, __func__);
+ ir->overflow_len = 0;
+ break;
+ } else {
+ dev_dbg(ir->d->dev, "[%d] %s: stray packet?\n",
+ ir->devnum, __func__);
+ ir->overflow_len = 0;
+ }
+ }
+
+ return;
+}
+
+static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
+{
+ struct mceusb_dev *ir;
+ int buf_len;
+
+ if (!urb)
+ return;
+
+ ir = urb->context;
+ if (!ir) {
+ usb_unlink_urb(urb);
+ return;
+ }
+
+ buf_len = urb->actual_length;
+
+ if (debug)
+ mceusb_dev_printdata(ir, urb->transfer_buffer, buf_len);
+
+ if (ir->send_flags == RECV_FLAG_IN_PROGRESS) {
+ ir->send_flags = SEND_FLAG_COMPLETE;
+ dev_dbg(ir->d->dev, "setup answer received %d bytes\n",
+ buf_len);
+ }
+
+ switch (urb->status) {
+ /* success */
+ case 0:
+ mceusb_process_ir_data(ir, buf_len);
+ break;
+
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ usb_unlink_urb(urb);
+ return;
+
+ case -EPIPE:
+ default:
+ break;
+ }
+
+ usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+
+static ssize_t mceusb_transmit_ir(struct file *file, const char *buf,
+ size_t n, loff_t *ppos)
+{
+ int i, count = 0, cmdcount = 0;
+ struct mceusb_dev *ir = NULL;
+ int wbuf[LIRCBUF_SIZE]; /* Workbuffer with values from lirc */
+ unsigned char cmdbuf[MCE_CMDBUF_SIZE]; /* MCE command buffer */
+ unsigned long signal_duration = 0; /* Singnal length in us */
+ struct timeval start_time, end_time;
+
+ do_gettimeofday(&start_time);
+
+ /* Retrieve lirc_driver data for the device */
+ ir = lirc_get_pdata(file);
+ if (!ir || !ir->usb_ep_out)
+ return -EFAULT;
+
+ if (n % sizeof(int))
+ return -EINVAL;
+ count = n / sizeof(int);
+
+ /* Check if command is within limits */
+ if (count > LIRCBUF_SIZE || count%2 == 0)
+ return -EINVAL;
+ if (copy_from_user(wbuf, buf, n))
+ return -EFAULT;
+
+ /* MCE tx init header */
+ cmdbuf[cmdcount++] = MCE_CONTROL_HEADER;
+ cmdbuf[cmdcount++] = 0x08;
+ cmdbuf[cmdcount++] = ir->transmitter_mask;
+
+ /* Generate mce packet data */
+ for (i = 0; (i < count) && (cmdcount < MCE_CMDBUF_SIZE); i++) {
+ signal_duration += wbuf[i];
+ wbuf[i] = wbuf[i] / MCE_TIME_UNIT;
+
+ do { /* loop to support long pulses/spaces > 127*50us=6.35ms */
+
+ /* Insert mce packet header every 4th entry */
+ if ((cmdcount < MCE_CMDBUF_SIZE) &&
+ (cmdcount - MCE_TX_HEADER_LENGTH) %
+ MCE_CODE_LENGTH == 0)
+ cmdbuf[cmdcount++] = MCE_PACKET_HEADER;
+
+ /* Insert mce packet data */
+ if (cmdcount < MCE_CMDBUF_SIZE)
+ cmdbuf[cmdcount++] =
+ (wbuf[i] < MCE_PULSE_BIT ?
+ wbuf[i] : MCE_MAX_PULSE_LENGTH) |
+ (i & 1 ? 0x00 : MCE_PULSE_BIT);
+ else
+ return -EINVAL;
+ } while ((wbuf[i] > MCE_MAX_PULSE_LENGTH) &&
+ (wbuf[i] -= MCE_MAX_PULSE_LENGTH));
+ }
+
+ /* Fix packet length in last header */
+ cmdbuf[cmdcount - (cmdcount - MCE_TX_HEADER_LENGTH) % MCE_CODE_LENGTH] =
+ 0x80 + (cmdcount - MCE_TX_HEADER_LENGTH) % MCE_CODE_LENGTH - 1;
+
+ /* Check if we have room for the empty packet at the end */
+ if (cmdcount >= MCE_CMDBUF_SIZE)
+ return -EINVAL;
+
+ /* All mce commands end with an empty packet (0x80) */
+ cmdbuf[cmdcount++] = 0x80;
+
+ /* Transmit the command to the mce device */
+ request_packet_async(ir, ir->usb_ep_out, cmdbuf,
+ cmdcount, MCEUSB_OUTBOUND);
+
+ /*
+ * The lircd gap calculation expects the write function to
+ * wait the time it takes for the ircommand to be sent before
+ * it returns.
+ */
+ do_gettimeofday(&end_time);
+ signal_duration -= (end_time.tv_usec - start_time.tv_usec) +
+ (end_time.tv_sec - start_time.tv_sec) * 1000000;
+
+ /* delay with the closest number of ticks */
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(usecs_to_jiffies(signal_duration));
+
+ return n;
+}
+
+static void set_transmitter_mask(struct mceusb_dev *ir, unsigned int mask)
+{
+ if (ir->flags.transmitter_mask_inverted)
+ ir->transmitter_mask = (mask != 0x03 ? mask ^ 0x03 : mask) << 1;
+ else
+ ir->transmitter_mask = mask;
+}
+
+
+/* Sets the send carrier frequency */
+static int set_send_carrier(struct mceusb_dev *ir, int carrier)
+{
+ int clk = 10000000;
+ int prescaler = 0, divisor = 0;
+ unsigned char cmdbuf[] = { 0x9F, 0x06, 0x01, 0x80 };
+
+ /* Carrier is changed */
+ if (ir->carrier_freq != carrier) {
+
+ if (carrier <= 0) {
+ ir->carrier_freq = carrier;
+ dev_dbg(ir->d->dev, "SET_CARRIER disabling carrier "
+ "modulation\n");
+ request_packet_async(ir, ir->usb_ep_out,
+ cmdbuf, sizeof(cmdbuf),
+ MCEUSB_OUTBOUND);
+ return carrier;
+ }
+
+ for (prescaler = 0; prescaler < 4; ++prescaler) {
+ divisor = (clk >> (2 * prescaler)) / carrier;
+ if (divisor <= 0xFF) {
+ ir->carrier_freq = carrier;
+ cmdbuf[2] = prescaler;
+ cmdbuf[3] = divisor;
+ dev_dbg(ir->d->dev, "SET_CARRIER requesting "
+ "%d Hz\n", carrier);
+
+ /* Transmit new carrier to mce device */
+ request_packet_async(ir, ir->usb_ep_out,
+ cmdbuf, sizeof(cmdbuf),
+ MCEUSB_OUTBOUND);
+ return carrier;
+ }
+ }
+
+ return -EINVAL;
+
+ }
+
+ return carrier;
+}
+
+
+static int mceusb_lirc_ioctl(struct inode *node, struct file *filep,
+ unsigned int cmd, unsigned long arg)
+{
+ int result;
+ unsigned int ivalue;
+ unsigned long lvalue;
+ struct mceusb_dev *ir = NULL;
+
+ /* Retrieve lirc_driver data for the device */
+ ir = lirc_get_pdata(filep);
+ if (!ir || !ir->usb_ep_out)
+ return -EFAULT;
+
+
+ switch (cmd) {
+ case LIRC_SET_TRANSMITTER_MASK:
+
+ result = get_user(ivalue, (unsigned int *) arg);
+ if (result)
+ return result;
+ switch (ivalue) {
+ case 0x01: /* Transmitter 1 => 0x04 */
+ case 0x02: /* Transmitter 2 => 0x02 */
+ case 0x03: /* Transmitter 1 & 2 => 0x06 */
+ set_transmitter_mask(ir, ivalue);
+ break;
+
+ default: /* Unsupported transmitter mask */
+ return MCE_MAX_CHANNELS;
+ }
+
+ dev_dbg(ir->d->dev, ": SET_TRANSMITTERS mask=%d\n", ivalue);
+ break;
+
+ case LIRC_GET_SEND_MODE:
+
+ result = put_user(LIRC_SEND2MODE(LIRC_CAN_SEND_PULSE &
+ LIRC_CAN_SEND_MASK),
+ (unsigned long *) arg);
+
+ if (result)
+ return result;
+ break;
+
+ case LIRC_SET_SEND_MODE:
+
+ result = get_user(lvalue, (unsigned long *) arg);
+
+ if (result)
+ return result;
+ if (lvalue != (LIRC_MODE_PULSE&LIRC_CAN_SEND_MASK))
+ return -EINVAL;
+ break;
+
+ case LIRC_SET_SEND_CARRIER:
+
+ result = get_user(ivalue, (unsigned int *) arg);
+ if (result)
+ return result;
+
+ set_send_carrier(ir, ivalue);
+ break;
+
+ default:
+ return lirc_dev_fop_ioctl(node, filep, cmd, arg);
+ }
+
+ return 0;
+}
+
+static struct file_operations lirc_fops = {
+ .owner = THIS_MODULE,
+ .write = mceusb_transmit_ir,
+ .ioctl = mceusb_lirc_ioctl,
+ .read = lirc_dev_fop_read,
+ .poll = lirc_dev_fop_poll,
+ .open = lirc_dev_fop_open,
+ .release = lirc_dev_fop_close,
+};
+
+static int mceusb_gen1_init(struct mceusb_dev *ir)
+{
+ int i, ret;
+ char junk[64], data[8];
+ int partial = 0;
+
+ /*
+ * Clear off the first few messages. These look like calibration
+ * or test data, I can't really tell. This also flushes in case
+ * we have random ir data queued up.
+ */
+ for (i = 0; i < 40; i++)
+ usb_bulk_msg(ir->usbdev,
+ usb_rcvbulkpipe(ir->usbdev,
+ ir->usb_ep_in->bEndpointAddress),
+ junk, 64, &partial, HZ * 10);
+
+ ir->is_pulse = 1;
+
+ memset(data, 0, 8);
+
+ /* Get Status */
+ ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
+ USB_REQ_GET_STATUS, USB_DIR_IN,
+ 0, 0, data, 2, HZ * 3);
+
+ /* ret = usb_get_status( ir->usbdev, 0, 0, data ); */
+ dev_dbg(ir->d->dev, "%s - ret = %d status = 0x%x 0x%x\n", __func__,
+ ret, data[0], data[1]);
+
+ /*
+ * This is a strange one. They issue a set address to the device
+ * on the receive control pipe and expect a certain value pair back
+ */
+ memset(data, 0, 8);
+
+ ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
+ USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
+ data, 2, HZ * 3);
+ dev_dbg(ir->d->dev, "%s - ret = %d, devnum = %d\n",
+ __func__, ret, ir->usbdev->devnum);
+ dev_dbg(ir->d->dev, "%s - data[0] = %d, data[1] = %d\n",
+ __func__, data[0], data[1]);
+
+ /* set feature: bit rate 38400 bps */
+ ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
+ USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
+ 0xc04e, 0x0000, NULL, 0, HZ * 3);
+
+ dev_dbg(ir->d->dev, "%s - ret = %d\n", __func__, ret);
+
+ /* bRequest 4: set char length to 8 bits */
+ ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
+ 4, USB_TYPE_VENDOR,
+ 0x0808, 0x0000, NULL, 0, HZ * 3);
+ dev_dbg(ir->d->dev, "%s - retB = %d\n", __func__, ret);
+
+ /* bRequest 2: set handshaking to use DTR/DSR */
+ ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
+ 2, USB_TYPE_VENDOR,
+ 0x0000, 0x0100, NULL, 0, HZ * 3);
+ dev_dbg(ir->d->dev, "%s - retC = %d\n", __func__, ret);
+
+ return ret;
+
+};
+
+static int mceusb_dev_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct usb_host_interface *idesc;
+ struct usb_endpoint_descriptor *ep = NULL;
+ struct usb_endpoint_descriptor *ep_in = NULL;
+ struct usb_endpoint_descriptor *ep_out = NULL;
+ struct usb_host_config *config;
+ struct mceusb_dev *ir = NULL;
+ struct lirc_driver *driver = NULL;
+ struct lirc_buffer *rbuf = NULL;
+ int devnum, pipe, maxp;
+ int minor = 0;
+ int i;
+ char buf[63], name[128] = "";
+ int mem_failure = 0;
+ int is_pinnacle;
+ int is_microsoft_gen1;
+
+ dev_dbg(&intf->dev, ": %s called\n", __func__);
+
+ usb_reset_device(dev);
+
+ config = dev->actconfig;
+
+ idesc = intf->cur_altsetting;
+
+ is_pinnacle = usb_match_id(intf, pinnacle_list) ? 1 : 0;
+
+ is_microsoft_gen1 = usb_match_id(intf, microsoft_gen1_list) ? 1 : 0;
+
+ /* step through the endpoints to find first bulk in and out endpoint */
+ for (i = 0; i < idesc->desc.bNumEndpoints; ++i) {
+ ep = &idesc->endpoint[i].desc;
+
+ if ((ep_in == NULL)
+ && ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+ == USB_DIR_IN)
+ && (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_BULK)
+ || ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_INT))) {
+
+ dev_dbg(&intf->dev, ": acceptable inbound endpoint "
+ "found\n");
+ ep_in = ep;
+ ep_in->bmAttributes = USB_ENDPOINT_XFER_INT;
+ if (is_pinnacle)
+ /*
+ * setting seems to 1 seem to cause issues with
+ * Pinnacle timing out on transfer.
+ */
+ ep_in->bInterval = ep->bInterval;
+ else
+ ep_in->bInterval = 1;
+ }
+
+ if ((ep_out == NULL)
+ && ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+ == USB_DIR_OUT)
+ && (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_BULK)
+ || ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_INT))) {
+
+ dev_dbg(&intf->dev, ": acceptable outbound endpoint "
+ "found\n");
+ ep_out = ep;
+ ep_out->bmAttributes = USB_ENDPOINT_XFER_INT;
+ if (is_pinnacle)
+ /*
+ * setting seems to 1 seem to cause issues with
+ * Pinnacle timing out on transfer.
+ */
+ ep_out->bInterval = ep->bInterval;
+ else
+ ep_out->bInterval = 1;
+ }
+ }
+ if (ep_in == NULL) {
+ dev_dbg(&intf->dev, ": inbound and/or endpoint not found\n");
+ return -ENODEV;
+ }
+
+ devnum = dev->devnum;
+ pipe = usb_rcvintpipe(dev, ep_in->bEndpointAddress);
+ maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+
+ mem_failure = 0;
+ ir = kzalloc(sizeof(struct mceusb_dev), GFP_KERNEL);
+ if (!ir) {
+ mem_failure = 1;
+ goto mem_failure_switch;
+ }
+
+ driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
+ if (!driver) {
+ mem_failure = 2;
+ goto mem_failure_switch;
+ }
+
+ rbuf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+ if (!rbuf) {
+ mem_failure = 3;
+ goto mem_failure_switch;
+ }
+
+ if (lirc_buffer_init(rbuf, sizeof(int), LIRCBUF_SIZE)) {
+ mem_failure = 4;
+ goto mem_failure_switch;
+ }
+
+ ir->buf_in = usb_buffer_alloc(dev, maxp, GFP_ATOMIC, &ir->dma_in);
+ if (!ir->buf_in) {
+ mem_failure = 5;
+ goto mem_failure_switch;
+ }
+
+ ir->urb_in = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ir->urb_in) {
+ mem_failure = 7;
+ goto mem_failure_switch;
+ }
+
+ strcpy(driver->name, DRIVER_NAME);
+ driver->minor = -1;
+ driver->features = LIRC_CAN_SEND_PULSE |
+ LIRC_CAN_SET_TRANSMITTER_MASK |
+ LIRC_CAN_REC_MODE2 |
+ LIRC_CAN_SET_SEND_CARRIER;
+ driver->data = ir;
+ driver->rbuf = rbuf;
+ driver->set_use_inc = &mceusb_ir_open;
+ driver->set_use_dec = &mceusb_ir_close;
+ driver->code_length = sizeof(int) * 8;
+ driver->fops = &lirc_fops;
+ driver->dev = &intf->dev;
+ driver->owner = THIS_MODULE;
+
+ mutex_init(&ir->lock);
+ init_waitqueue_head(&ir->wait_out);
+
+ minor = lirc_register_driver(driver);
+ if (minor < 0)
+ mem_failure = 9;
+
+mem_failure_switch:
+
+ switch (mem_failure) {
+ case 9:
+ usb_free_urb(ir->urb_in);
+ case 7:
+ usb_buffer_free(dev, maxp, ir->buf_in, ir->dma_in);
+ case 5:
+ lirc_buffer_free(rbuf);
+ case 4:
+ kfree(rbuf);
+ case 3:
+ kfree(driver);
+ case 2:
+ kfree(ir);
+ case 1:
+ dev_info(&intf->dev, "out of memory (code=%d)\n", mem_failure);
+ return -ENOMEM;
+ }
+
+ driver->minor = minor;
+ ir->d = driver;
+ ir->devnum = devnum;
+ ir->usbdev = dev;
+ ir->len_in = maxp;
+ ir->overflow_len = 0;
+ ir->flags.connected = 0;
+ ir->flags.pinnacle = is_pinnacle;
+ ir->flags.microsoft_gen1 = is_microsoft_gen1;
+ ir->flags.transmitter_mask_inverted =
+ usb_match_id(intf, transmitter_mask_list) ? 0 : 1;
+
+ ir->lircdata = PULSE_MASK;
+ ir->is_pulse = 0;
+
+ /* ir->flags.transmitter_mask_inverted must be set */
+ set_transmitter_mask(ir, MCE_DEFAULT_TX_MASK);
+ /* Saving usb interface data for use by the transmitter routine */
+ ir->usb_ep_in = ep_in;
+ ir->usb_ep_out = ep_out;
+
+ if (dev->descriptor.iManufacturer
+ && usb_string(dev, dev->descriptor.iManufacturer,
+ buf, sizeof(buf)) > 0)
+ strlcpy(name, buf, sizeof(name));
+ if (dev->descriptor.iProduct
+ && usb_string(dev, dev->descriptor.iProduct,
+ buf, sizeof(buf)) > 0)
+ snprintf(name + strlen(name), sizeof(name) - strlen(name),
+ " %s", buf);
+
+ /* inbound data */
+ usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in,
+ maxp, (usb_complete_t) mceusb_dev_recv, ir, ep_in->bInterval);
+ ir->urb_in->transfer_dma = ir->dma_in;
+ ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ /* initialize device */
+ if (ir->flags.pinnacle) {
+ int usbret;
+
+ /*
+ * I have no idea why but this reset seems to be crucial to
+ * getting the device to do outbound IO correctly - without
+ * this the device seems to hang, ignoring all input - although
+ * IR signals are correctly sent from the device, no input is
+ * interpreted by the device and the host never does the
+ * completion routine
+ */
+
+ usbret = usb_reset_configuration(dev);
+ dev_info(ir->d->dev, "usb reset config ret %x\n", usbret);
+
+ /*
+ * its possible we really should wait for a return
+ * for each of these...
+ */
+ request_packet_async(ir, ep_in, NULL, maxp, MCEUSB_INBOUND);
+ request_packet_async(ir, ep_out, pin_init1, sizeof(pin_init1),
+ MCEUSB_OUTBOUND);
+ request_packet_async(ir, ep_in, NULL, maxp, MCEUSB_INBOUND);
+ request_packet_async(ir, ep_out, pin_init2, sizeof(pin_init2),
+ MCEUSB_OUTBOUND);
+ request_packet_async(ir, ep_in, NULL, maxp, MCEUSB_INBOUND);
+ request_packet_async(ir, ep_out, pin_init3, sizeof(pin_init3),
+ MCEUSB_OUTBOUND);
+ } else if (ir->flags.microsoft_gen1) {
+ /* original ms mce device requires some additional setup */
+ mceusb_gen1_init(ir);
+ } else {
+
+ request_packet_async(ir, ep_in, NULL, maxp, MCEUSB_INBOUND);
+ request_packet_async(ir, ep_in, NULL, maxp, MCEUSB_INBOUND);
+ request_packet_async(ir, ep_out, init1,
+ sizeof(init1), MCEUSB_OUTBOUND);
+ request_packet_async(ir, ep_in, NULL, maxp, MCEUSB_INBOUND);
+ request_packet_async(ir, ep_out, init2,
+ sizeof(init2), MCEUSB_OUTBOUND);
+ }
+
+ /*
+ * if we don't issue the correct number of receives (MCEUSB_INBOUND)
+ * for each outbound, then the first few ir pulses will be interpreted
+ * by the usb_async_callback routine - we should ensure we have the
+ * right amount OR less - as the mceusb_dev_recv routine will handle
+ * the control packets OK - they start with 0x9f - but the async
+ * callback doesn't handle ir pulse packets
+ */
+ request_packet_async(ir, ep_in, NULL, maxp, 0);
+
+ usb_set_intfdata(intf, ir);
+
+ dev_info(ir->d->dev, "Registered %s on usb%d:%d\n", name,
+ dev->bus->busnum, devnum);
+
+ return 0;
+}
+
+
+static void mceusb_dev_disconnect(struct usb_interface *intf)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct mceusb_dev *ir = usb_get_intfdata(intf);
+
+ usb_set_intfdata(intf, NULL);
+
+ if (!ir || !ir->d)
+ return;
+
+ ir->usbdev = NULL;
+ wake_up_all(&ir->wait_out);
+
+ mutex_lock(&ir->lock);
+ usb_kill_urb(ir->urb_in);
+ usb_free_urb(ir->urb_in);
+ usb_buffer_free(dev, ir->len_in, ir->buf_in, ir->dma_in);
+ mutex_unlock(&ir->lock);
+
+ unregister_from_lirc(ir);
+}
+
+static int mceusb_dev_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct mceusb_dev *ir = usb_get_intfdata(intf);
+ dev_info(ir->d->dev, "suspend\n");
+ usb_kill_urb(ir->urb_in);
+ return 0;
+}
+
+static int mceusb_dev_resume(struct usb_interface *intf)
+{
+ struct mceusb_dev *ir = usb_get_intfdata(intf);
+ dev_info(ir->d->dev, "resume\n");
+ if (usb_submit_urb(ir->urb_in, GFP_ATOMIC))
+ return -EIO;
+ return 0;
+}
+
+static struct usb_driver mceusb_dev_driver = {
+ .name = DRIVER_NAME,
+ .probe = mceusb_dev_probe,
+ .disconnect = mceusb_dev_disconnect,
+ .suspend = mceusb_dev_suspend,
+ .resume = mceusb_dev_resume,
+ .reset_resume = mceusb_dev_resume,
+ .id_table = mceusb_dev_table
+};
+
+static int __init mceusb_dev_init(void)
+{
+ int i;
+
+ printk(KERN_INFO DRIVER_NAME ": " DRIVER_DESC " " DRIVER_VERSION "\n");
+ printk(KERN_INFO DRIVER_NAME ": " DRIVER_AUTHOR "\n");
+ if (debug)
+ printk(KERN_DEBUG DRIVER_NAME ": debug mode enabled\n");
+
+ i = usb_register(&mceusb_dev_driver);
+ if (i < 0) {
+ printk(KERN_ERR DRIVER_NAME
+ ": usb register failed, result = %d\n", i);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void __exit mceusb_dev_exit(void)
+{
+ usb_deregister(&mceusb_dev_driver);
+}
+
+module_init(mceusb_dev_init);
+module_exit(mceusb_dev_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(usb, mceusb_dev_table);
+/* this was originally lirc_mceusb2, lirc_mceusb and lirc_mceusb2 merged now */
+MODULE_ALIAS("lirc_mceusb2");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/