[PATCH v9 0/4] APM X-Gene PCIe host controller

[Tanmay Inamdar]

This patch adds support for AppliedMicro X-Gene PCIe host controller. The
driver is tested on X-Gene platform with different gen1/2/3 PCIe endpoint
cards.

X-Gene PCIe controller driver has depedency on the pcie arm64 arch support.
Liviu Dudau from ARM has sent a patch set for pcie arm64 arch support and
support for creating generic pcie bridge from device tree. Liviu's patches
are available here
https://lkml.org/lkml/2014/9/8/333

If someone wishes to test PCIe on X-Gene with this patch set, above mentioned
patches from Liviu must be applied before the patches in this patch set. Also
please use latest xgene u-boot firmware.

changes since V8:
1. Add 'dma-coherent' attribute in device node.

changes since V7:
1. Fix outbound region mapping for IO region. Thanks Liviu for the catch.

changes since V6:
1. Port driver to changed interface as per Liviu's v10 series.

changes since V5:
1. Port driver to changed interface of 'of_create_pci_host_bridge'
2. Fix the prefetch bit setting
3. Removed bunch of register programming which is already done by firmware

changes since V4:
1. fix section mismatch warnings
2. fix the patch description
3. fix indentation
4. update read/write cfg functions by passing both addr and offset.
5. use 'time_before' for timeout.
6. remove unnecessary 'IS_ERR_OR_NULL'. Keep 'IS_ERR' for 'clk_get'
7. remove BUG_ON for pci_ioremap_io.

changes since V3:
1. remove 'struct hw_pci' and supporting ops in hw_pci
2. add code to create the host bridge from dts
3. add code to scan the the host bridge
4. modify outbound windows setup function to get resource information from
   'bridge->windows'
5. add compatible string in pcie dts node with current X-Gene SOC name.

changes since V2:
1. redefined each PCI port in different PCI domain correctly.
2. removed setup_lane and setup_link functions from driver.
3. removed scan_bus wrapper and set_primary_bus hack.
4. added pci_ioremap_io for io resources.

changes since V1:
1. added PCI domain support
2. reading cpu and pci addresses from device tree to configure regions.
3. got rid of unnecessary wrappers for readl and writel.
4. got rid of endpoint configuration code.
5. added 'dma-ranges' property support to read inbound region configuration.
6. renamed host driver file to 'pci-xgene.c' from 'pcie-xgene.c'
7. dropped 'clock-names' property from bindings
8. added comments whereever requested.


Tanmay Inamdar (4):
  pci:host: APM X-Gene PCIe host controller driver
  arm64: dts: APM X-Gene PCIe device tree nodes
  dt-bindings: pci: xgene pcie device tree bindings
  MAINTAINERS: entry for APM X-Gene PCIe host driver

 .../devicetree/bindings/pci/xgene-pci.txt          |  57 ++
 MAINTAINERS                                        |   8 +
 arch/arm64/boot/dts/apm-mustang.dts                |   8 +
 arch/arm64/boot/dts/apm-storm.dtsi                 | 165 ++++++
 drivers/pci/host/Kconfig                           |  10 +
 drivers/pci/host/Makefile                          |   1 +
 drivers/pci/host/pci-xgene.c                       | 646 +++++++++++++++++++++
 7 files changed, 895 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/xgene-pci.txt
 create mode 100644 drivers/pci/host/pci-xgene.c

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/