Re: [PATCH v4 2/3] i2c: add support for Diolan DLN-2 USB-I2C adapter

From: Johan Hovold
Date: Wed Sep 17 2014 - 05:47:05 EST

On Tue, Sep 09, 2014 at 10:24:45PM +0300, Octavian Purdila wrote:
> From: Laurentiu Palcu <laurentiu.palcu@xxxxxxxxx>
>
> This patch adds support for the Diolan DLN-2 I2C master module. Due
> to hardware limitations it does not support SMBUS quick commands.
>
> Information about the USB protocol interface can be found in the
> Programmer's Reference Manual [1], see section 6.2.2 for the I2C
> master module commands and responses.
>
> [1] https://www.diolan.com/downloads/dln-api-manual.pdf
>
> Signed-off-by: Laurentiu Palcu <laurentiu.palcu@xxxxxxxxx>
> Signed-off-by: Octavian Purdila <octavian.purdila@xxxxxxxxx>
> ---
> drivers/i2c/busses/Kconfig | 10 ++
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-dln2.c | 390 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 401 insertions(+)
> create mode 100644 drivers/i2c/busses/i2c-dln2.c
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 2ac87fa..6afc17e 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -1021,4 +1021,14 @@ config SCx200_ACB
> This support is also available as a module. If so, the module
> will be called scx200_acb.
>
> +config I2C_DLN2
> + tristate "Diolan DLN-2 USB I2C adapter"
> + depends on MFD_DLN2
> + help
> + If you say yes to this option, support will be included for Diolan
> + DLN2, a USB to I2C interface.
> +
> + This driver can also be built as a module. If so, the module
> + will be called i2c-dln2.
> +
> endmenu
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index 49bf07e..3118fea 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -100,5 +100,6 @@ obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
> obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
> obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
> obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
> +obj-$(CONFIG_I2C_DLN2) += i2c-dln2.o
>
> ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
> diff --git a/drivers/i2c/busses/i2c-dln2.c b/drivers/i2c/busses/i2c-dln2.c
> new file mode 100644
> index 0000000..ac09ec4
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-dln2.c
> @@ -0,0 +1,390 @@
> +/*
> + * Driver for the Diolan DLN-2 USB-I2C adapter
> + *
> + * Copyright (c) 2014 Intel Corporation
> + *
> + * Derived from:
> + * i2c-diolan-u2c.c
> + * Copyright (c) 2010-2011 Ericsson AB
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation, version 2.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/errno.h>
> +#include <linux/module.h>
> +#include <linux/types.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/platform_device.h>
> +#include <linux/mfd/dln2.h>
> +
> +#define DRIVER_NAME "dln2-i2c"
> +
> +#define DLN2_I2C_MODULE_ID 0x03
> +#define DLN2_I2C_CMD(cmd) DLN2_CMD(cmd, DLN2_I2C_MODULE_ID)
> +
> +/* I2C commands */
> +#define DLN2_I2C_GET_PORT_COUNT DLN2_I2C_CMD(0x00)
> +#define DLN2_I2C_ENABLE DLN2_I2C_CMD(0x01)
> +#define DLN2_I2C_DISABLE DLN2_I2C_CMD(0x02)
> +#define DLN2_I2C_IS_ENABLED DLN2_I2C_CMD(0x03)
> +#define DLN2_I2C_SET_FREQUENCY DLN2_I2C_CMD(0x04)
> +#define DLN2_I2C_GET_FREQUENCY DLN2_I2C_CMD(0x05)
> +#define DLN2_I2C_WRITE DLN2_I2C_CMD(0x06)
> +#define DLN2_I2C_READ DLN2_I2C_CMD(0x07)
> +#define DLN2_I2C_SCAN_DEVICES DLN2_I2C_CMD(0x08)
> +#define DLN2_I2C_PULLUP_ENABLE DLN2_I2C_CMD(0x09)
> +#define DLN2_I2C_PULLUP_DISABLE DLN2_I2C_CMD(0x0A)
> +#define DLN2_I2C_PULLUP_IS_ENABLED DLN2_I2C_CMD(0x0B)
> +#define DLN2_I2C_TRANSFER DLN2_I2C_CMD(0x0C)
> +#define DLN2_I2C_SET_MAX_REPLY_COUNT DLN2_I2C_CMD(0x0D)
> +#define DLN2_I2C_GET_MAX_REPLY_COUNT DLN2_I2C_CMD(0x0E)
> +#define DLN2_I2C_GET_MIN_FREQUENCY DLN2_I2C_CMD(0x40)
> +#define DLN2_I2C_GET_MAX_FREQUENCY DLN2_I2C_CMD(0x41)
> +
> +#define DLN2_I2C_FREQ_STD 100000
> +
> +#define DLN2_I2C_MAX_XFER_SIZE 256
> +
> +struct dln2_i2c {
> + struct platform_device *pdev;
> + struct i2c_adapter adapter;
> + uint32_t freq;
> + uint32_t min_freq;
> + uint32_t max_freq;

Please use u32 throughout for consistency.

> + /*
> + * Buffer to hold the packet for read or write transfers. One
> + * is enough since we can't have multiple transfers in
> + * parallel on the i2c adapter.
> + */
> + union {
> + struct {
> + u8 port;
> + u8 addr;
> + u8 mem_addr_len;
> + __le32 mem_addr;
> + __le16 buf_len;
> + u8 buf[DLN2_I2C_MAX_XFER_SIZE];
> + } __packed tx;
> + struct {
> + __le16 buf_len;
> + u8 buf[DLN2_I2C_MAX_XFER_SIZE];
> + } __packed rx;
> + } buf;

While this works in this case due to the extra copy you do in
dln2_transfer, allocating buffers that would (generally) be used for DMA
transfers as part of a larger structure is a recipe for trouble.

It's probably better to allocate separately, if only to prevent people
from thinking there might be a bug here.

> +};
> +
> +static int dln2_i2c_enable(struct dln2_i2c *dln2, bool enable)
> +{
> + struct dln2_platform_data *pdata = dev_get_platdata(&dln2->pdev->dev);
> + int ret;
> + u8 port;
> + u16 cmd;
> +
> + port = pdata->i2c.port;
> +
> + if (enable)
> + cmd = DLN2_I2C_ENABLE;
> + else
> + cmd = DLN2_I2C_DISABLE;
> +
> + ret = dln2_transfer(dln2->pdev, cmd, &port, sizeof(port), NULL, NULL);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int dln2_i2c_set_frequency(struct dln2_i2c *dln2, u32 freq)
> +{
> + int ret;
> + struct tx_data {
> + u8 port;
> + __le32 freq;
> + } __packed tx;
> + struct dln2_platform_data *pdata = dev_get_platdata(&dln2->pdev->dev);
> +
> + tx.port = pdata->i2c.port;
> + tx.freq = cpu_to_le32(freq);
> +
> + ret = dln2_transfer(dln2->pdev, DLN2_I2C_SET_FREQUENCY, &tx, sizeof(tx),
> + NULL, NULL);
> + if (ret < 0)
> + return ret;
> +
> + dln2->freq = freq;
> +
> + return 0;
> +}
> +
> +static int dln2_i2c_get_freq(struct dln2_i2c *dln2, u16 cmd, uint32_t *res)

u32

> +{
> + int ret;
> + struct dln2_platform_data *pdata = dev_get_platdata(&dln2->pdev->dev);
> + u8 port = pdata->i2c.port;
> + __le32 freq;
> + unsigned len = sizeof(freq);
> +
> + ret = dln2_transfer(dln2->pdev, cmd, &port, sizeof(port),
> + &freq, &len);
> + if (ret < 0)
> + return ret;
> + if (len < sizeof(freq))
> + return -EPROTO;
> +
> + *res = le32_to_cpu(freq);
> +
> + return 0;
> +}
> +
> +static int dln2_i2c_setup(struct dln2_i2c *dln2)
> +{
> + int ret;
> +
> + ret = dln2_i2c_enable(dln2, false);
> + if (ret < 0)
> + return ret;
> +
> + ret = dln2_i2c_get_freq(dln2, DLN2_I2C_GET_MIN_FREQUENCY,
> + &dln2->min_freq);
> + if (ret < 0)
> + return 0;
> +
> + ret = dln2_i2c_get_freq(dln2, DLN2_I2C_GET_MAX_FREQUENCY,
> + &dln2->max_freq);
> + if (ret < 0)
> + return 0;
> +
> + ret = dln2_i2c_set_frequency(dln2, DLN2_I2C_FREQ_STD);
> + if (ret < 0)
> + return ret;
> +
> + ret = dln2_i2c_enable(dln2, true);
> +
> + return ret;
> +}
> +
> +static int dln2_i2c_write(struct dln2_i2c *dln2, u8 addr,
> + u8 *data, u16 data_len)
> +{
> + struct dln2_platform_data *pdata = dev_get_platdata(&dln2->pdev->dev);
> + int ret;
> + unsigned len;
> +
> + dln2->buf.tx.port = pdata->i2c.port;
> + dln2->buf.tx.addr = addr;
> + dln2->buf.tx.mem_addr_len = 0;
> + dln2->buf.tx.mem_addr = 0;
> + dln2->buf.tx.buf_len = cpu_to_le16(data_len);
> + memcpy(dln2->buf.tx.buf, data, data_len);
> +
> + len = sizeof(dln2->buf.tx) + data_len - DLN2_I2C_MAX_XFER_SIZE;
> + ret = dln2_transfer(dln2->pdev, DLN2_I2C_WRITE, &dln2->buf.tx, len,
> + NULL, NULL);
> + if (ret < 0)
> + return ret;
> +
> + return data_len;
> +}
> +
> +static int dln2_i2c_read(struct dln2_i2c *dln2, u16 addr, u8 *data,
> + u16 data_len)
> +{
> + struct dln2_platform_data *pdata = dev_get_platdata(&dln2->pdev->dev);
> + int ret;
> + struct {
> + u8 port;
> + u8 addr;
> + u8 mem_addr_len;
> + __le32 mem_addr;
> + __le16 buf_len;
> + } __packed tx;
> + unsigned rx_len, rx_buf_len;
> +
> + tx.port = pdata->i2c.port;
> + tx.addr = addr;
> + tx.mem_addr_len = 0;
> + tx.mem_addr = 0;
> + tx.buf_len = cpu_to_le16(data_len);
> +
> + rx_len = sizeof(dln2->buf.rx);
> +
> + ret = dln2_transfer(dln2->pdev, DLN2_I2C_READ, &tx, sizeof(tx),
> + &dln2->buf.rx, &rx_len);
> + if (ret < 0)
> + return ret;
> + if (rx_len < 2)

Use sizeof(dln2->buf.rx.buf_len) here as well.

> + return -EPROTO;
> +
> + rx_buf_len = le16_to_cpu(dln2->buf.rx.buf_len);
> + if (rx_len < rx_buf_len + sizeof(dln2->buf.rx.buf_len))
> + return -EPROTO;
> +
> + if (data_len > rx_buf_len)
> + data_len = rx_buf_len;

You're still not checking that the received data does not overflow the
supplied buffer as I already commented on v3.

> +
> + memcpy(data, dln2->buf.rx.buf, data_len);
> +
> + return data_len;
> +}
> +
> +static int dln2_i2c_xfer(struct i2c_adapter *adapter,
> + struct i2c_msg *msgs, int num)
> +{
> + struct dln2_i2c *dln2 = i2c_get_adapdata(adapter);
> + struct i2c_msg *pmsg;
> + int i;
> +
> + for (i = 0; i < num; i++) {
> + int ret;
> +
> + pmsg = &msgs[i];
> +
> + if (pmsg->len > DLN2_I2C_MAX_XFER_SIZE)
> + return -EINVAL;
> +
> + if (pmsg->flags & I2C_M_RD) {
> + ret = dln2_i2c_read(dln2, pmsg->addr, pmsg->buf,
> + pmsg->len);
> + if (ret < 0)
> + return ret;
> +
> + pmsg->len = ret;
> + } else {
> + ret = dln2_i2c_write(dln2, pmsg->addr, pmsg->buf,
> + pmsg->len);
> + if (ret != pmsg->len)
> + return -EPROTO;
> + }
> + }
> +
> + return num;
> +}
> +
> +static u32 dln2_i2c_func(struct i2c_adapter *a)
> +{
> + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA |
> + I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
> + I2C_FUNC_SMBUS_I2C_BLOCK;
> +}
> +
> +static const struct i2c_algorithm dln2_i2c_usb_algorithm = {
> + .master_xfer = dln2_i2c_xfer,
> + .functionality = dln2_i2c_func,
> +};
> +
> +static ssize_t dln2_i2c_freq_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct dln2_i2c *dln2 = dev_get_drvdata(dev);
> +
> + return snprintf(buf, PAGE_SIZE, "%d\n", dln2->freq);
> +}
> +
> +static ssize_t dln2_i2c_freq_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct dln2_i2c *dln2 = dev_get_drvdata(dev);
> + unsigned long freq;
> + int ret;
> +
> + if (kstrtoul(buf, 0, &freq) || freq < dln2->min_freq ||
> + freq > dln2->max_freq)
> + return -EINVAL;
> +
> + ret = dln2_i2c_enable(dln2, false);
> + if (ret < 0)
> + return ret;
> +
> + ret = dln2_i2c_set_frequency(dln2, freq);
> + if (ret < 0)
> + return ret;
> +
> + ret = dln2_i2c_enable(dln2, true);
> +
> + return count;
> +}
> +
> +static DEVICE_ATTR(freq, S_IRUGO|S_IWUSR, dln2_i2c_freq_show,
> + dln2_i2c_freq_store);

Use DEVICE_ATTR_RW

> +
> +static int dln2_i2c_probe(struct platform_device *pdev)
> +{
> + int ret;
> + struct dln2_i2c *dln2;
> + struct device *dev = &pdev->dev;
> + struct dln2_platform_data *pdata = dev_get_platdata(&pdev->dev);
> +
> + dln2 = devm_kzalloc(dev, sizeof(*dln2), GFP_KERNEL);
> + if (!dln2)
> + return -ENOMEM;
> +
> + dln2->pdev = pdev;
> +
> + /* setup i2c adapter description */
> + dln2->adapter.owner = THIS_MODULE;
> + dln2->adapter.class = I2C_CLASS_HWMON;
> + dln2->adapter.algo = &dln2_i2c_usb_algorithm;
> + dln2->adapter.dev.parent = dev;
> + i2c_set_adapdata(&dln2->adapter, dln2);
> + snprintf(dln2->adapter.name, sizeof(dln2->adapter.name), "%s-%s-%d",
> + DRIVER_NAME, dev_name(pdev->dev.parent), pdata->i2c.port);
> +
> + platform_set_drvdata(pdev, dln2);
> +
> + ret = device_create_file(dev, &dev_attr_freq);
> + if (ret < 0) {
> + dev_err(dev, "failed to add freq attribute\n");
> + return ret;
> + }

There are a couple of problems here. First, you should not make this an
attribute of the platform device, which is created before any driver is
bound (might not ever happen).

Instead add the attribute to the i2c adapter below. However, you need to
do this using device attribute groups to avoid racing with userspace (as
you are when using device_create_file after the device itself has been
created).

You should probably also make your attribute name less generic by adding
a "dln2_"-prefix.

> +
> + /* initialize the i2c interface */
> + ret = dln2_i2c_setup(dln2);
> + if (ret < 0) {
> + dev_err(dev, "failed to initialize adapter: %d\n", ret);
> + goto out_remove_freq_attr;
> + }
> +
> + /* and finally attach to i2c layer */
> + ret = i2c_add_adapter(&dln2->adapter);
> + if (ret < 0) {
> + dev_err(dev, "failed to add I2C adapter: %d\n", ret);
> + goto out_disable;
> + }
> +
> + return 0;
> +
> +out_disable:
> + dln2_i2c_enable(dln2, false);
> +out_remove_freq_attr:
> + device_remove_file(dev, &dev_attr_freq);
> +
> + return ret;
> +}

I'll try to look through v4 of the gpio driver tomorrow as well.

Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/