Re: [PATCH v2] ARM: dts: imx6dl: disable dma support for spi on i.mx6dl

[Alexander Holler]

Am 17.09.2014 10:51, schrieb Robin Gong:
> On Tue, Sep 16, 2014 at 11:41:55AM +0200, Alexander Holler wrote:
> > Am 16.09.2014 05:52, schrieb Robin Gong:
> > > On Mon, Sep 15, 2014 at 01:50:02PM +0200, Alexander Holler wrote:
> > > > Am 10.09.2014 07:30, schrieb Robin Gong:
> > > > > There is one weird data in rxfifo after one full rx/tx transfer
> > > > > done sometimes. It looks a design issue and hard to workaround
> > > > > totally, so disable dma functhion here. And will re-enable it
> > > > > once the root cause found.
> > > >
> > > > Hmm, I experience problems with DMA too but on uart3. I'm using the same
> > > > workaround for the uart (I've just commented out the dma entries in the DT).
> > > > The problem manifests itself here such, that brcm_patchram_plus
> > > > hangs while uploading the firmware to a BCM4330 connected at uart3
> > > > (reproducible).

(...)

> Yes, we just have fixed the BT issue over high speed UART last month. Suggest
> you trying our patches based on v3.10.

Thanks for the pointer. Will look if I will find these patches.

Regards,

Alexander Holler

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/