Re: [PATCH 3.17-rc4 v7 4/6] irqchip: gic: Add support for IPI FIQ

From: Russell King - ARM Linux
Date: Wed Sep 17 2014 - 17:07:30 EST

Next message: Felipe Balbi: "Re: bug on ftrace with v3.17-rc5"
Previous message: Julien Grall: "[PATCH] arm{,64}/xen: Remove "EXPERIMENTAL" in the description of the Xen options"
In reply to: Daniel Thompson: "Re: [PATCH 3.17-rc4 v7 4/6] irqchip: gic: Add support for IPI FIQ"
Next in thread: Russell King - ARM Linux: "Re: [PATCH 3.17-rc4 v7 4/6] irqchip: gic: Add support for IPI FIQ"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, Sep 17, 2014 at 01:12:23PM -0700, Daniel Thompson wrote:
> On 17/09/14 11:51, Russell King - ARM Linux wrote:
> > On Wed, Sep 17, 2014 at 09:10:16AM -0700, Daniel Thompson wrote:
> >> This patch provides support for arm's newly added IPI FIQ. It works
> >> by placing all interrupt sources *except* IPI FIQ in group 1 and
> >> then flips a configuration bit in the GIC such that group 1
> >> interrupts use IRQ and group 0 interrupts use FIQ.
> >>
> >> All GIC hardware except GICv1-without-TrustZone support provides a means
> >> to group exceptions into group 0 and group 1. However the hardware
> >> functionality is unavailable to the kernel when a secure monitor is
> >> present because access to the grouping registers are prohibited outside
> >> "secure world" (a feature that allows grouping to be used to allow
> >> hardware peripherals to send interrupts into the secure world). However
> >> when grouping is not available we can rely on the GIC's RAZ/WI semantics
> >> and avoid conditional code.
> >
> > I've been chasing a bug with this on the Versatile Express CT9x4. It
> > seems that the GIC there is a GICv1, with secure extensions. It seems
> > to support interrupt grouping.
> >
> > However, setting SPIs to group 1, with the control registers enabling
> > both group 0 and group 1 (such that both groups are treated as IRQs)
> > results in no SPIs being delivered to the kernel. In other words,
> > setting GIC_DIST_IGROUP for SPIs, and setting both GIC_CPU_CTRL and
> > GIC_DIST_CTRL to 3.
>
> I may have missed something but this sounds like the expected behaviour
> to me.
>
> Without AckCtl set (GIC_CPU_CTRL bit 2) then it is not possible to
> acknowledge group 1 interrupts from secure mode. Thus in the
> circumstances described above I would expect the system to wedge in the
> interrupt handler because IRQ is raised but the software is not able to
> acknowledge it.

Setting AckCtl (0x07) results in no change in behaviour - still crashes
when it tries to calibrate the timer.

> I think there may also problems with leaving CBPR unset. Leaving CBPR
> unset certainly causes a change of behaviour compared to an all group0
> setup.

Also tried setting that (0x17), but still the same.

> Daniel.
>
>
> > This is rather worrying, because we seem to have a GIC which for all
> > intents and purposes appears to be compatible with what we want to do,
> > appears to conform with the GIC architecture specifications, but doesn't
> > actually work.
> >
> > I suspect that running the Versatile Express CT9x4 in non-secure mode
> > wouldn't work (because in non-secure mode, the GIC only allows access
> > to group 1 interrupts.)
> >
> > I've added Will and Mark to this to see whether they have any comment.
> >
> >> gic_raise_softirq() also needs changing to make it safe to call from
> >> FIQ. This is due to its use by wake_up_klogd() during console_unlock().
> >>
> >> Tested on Freescale i.MX6 (quad A9, GICv1-with-TrustZone running in
> >> secure mode).
> >>
> >> Signed-off-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
> >> Cc: Russell King <linux@xxxxxxxxxxxxxxxx>
> >> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> >> Cc: Jason Cooper <jason@xxxxxxxxxxxxxx>
> >> ---
> >> arch/arm/kernel/traps.c | 5 +-
> >> drivers/irqchip/irq-gic.c | 162 ++++++++++++++++++++++++++++++++++++++--
> >> include/linux/irqchip/arm-gic.h | 3 +
> >> 3 files changed, 162 insertions(+), 8 deletions(-)
> >>
> >> diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
> >> index 439138d..92c4ea1 100644
> >> --- a/arch/arm/kernel/traps.c
> >> +++ b/arch/arm/kernel/traps.c
> >> @@ -26,6 +26,7 @@
> >> #include <linux/init.h>
> >> #include <linux/sched.h>
> >> #include <linux/irq.h>
> >> +#include <linux/irqchip/arm-gic.h>
> >>
> >> #include <linux/atomic.h>
> >> #include <asm/cacheflush.h>
> >> @@ -479,7 +480,9 @@ asmlinkage void __exception_irq_entry handle_fiq_as_nmi(struct pt_regs *regs)
> >>
> >> nmi_enter();
> >>
> >> - /* nop. FIQ handlers for special arch/arm features can be added here. */
> >> +#ifdef CONFIG_ARM_GIC
> >> + gic_handle_fiq_ipi();
> >> +#endif
> >>
> >> nmi_exit();
> >>
> >> diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
> >> index 4b959e6..05b5d62 100644
> >> --- a/drivers/irqchip/irq-gic.c
> >> +++ b/drivers/irqchip/irq-gic.c
> >> @@ -39,8 +39,10 @@
> >> #include <linux/slab.h>
> >> #include <linux/irqchip/chained_irq.h>
> >> #include <linux/irqchip/arm-gic.h>
> >> +#include <linux/ratelimit.h>
> >>
> >> #include <asm/cputype.h>
> >> +#include <asm/fiq.h>
> >> #include <asm/irq.h>
> >> #include <asm/exception.h>
> >> #include <asm/smp_plat.h>
> >> @@ -48,6 +50,10 @@
> >> #include "irq-gic-common.h"
> >> #include "irqchip.h"
> >>
> >> +#ifndef SMP_IPI_FIQ_MASK
> >> +#define SMP_IPI_FIQ_MASK 0
> >> +#endif
> >> +
> >> union gic_base {
> >> void __iomem *common_base;
> >> void __percpu * __iomem *percpu_base;
> >> @@ -71,6 +77,8 @@ struct gic_chip_data {
> >> };
> >>
> >> static DEFINE_RAW_SPINLOCK(irq_controller_lock);
> >> +/* A fiq-safe spinlock must only be locked when the FIQ is masked */
> >> +static DEFINE_RAW_SPINLOCK(fiq_safe_migration_lock);
> >>
> >> /*
> >> * The GIC mapping of CPU interfaces does not necessarily match
> >> @@ -325,6 +333,94 @@ static struct irq_chip gic_chip = {
> >> .irq_set_wake = gic_set_wake,
> >> };
> >>
> >> +/*
> >> + * Shift an interrupt between Group 0 and Group 1.
> >> + *
> >> + * In addition to changing the group we also modify the priority to
> >> + * match what "ARM strongly recommends" for a system where no Group 1
> >> + * interrupt must ever preempt a Group 0 interrupt.
> >> + *
> >> + * If is safe to call this function on systems which do not support
> >> + * grouping (it will have no effect).
> >> + */
> >> +static void gic_set_group_irq(void __iomem *base, unsigned int hwirq,
> >> + int group)
> >> +{
> >> + unsigned int grp_reg = hwirq / 32 * 4;
> >> + u32 grp_mask = BIT(hwirq % 32);
> >> + u32 grp_val;
> >> +
> >> + unsigned int pri_reg = (hwirq / 4) * 4;
> >> + u32 pri_mask = BIT(7 + ((hwirq % 4) * 8));
> >> + u32 pri_val;
> >> +
> >> + /*
> >> + * Systems which do not support grouping will have no bits
> >> + * set in IGROUP[0] (and all systems which do will have set bits).
> >> + */
> >> + grp_val = readl_relaxed(base + GIC_DIST_IGROUP + 0);
> >> + if (!grp_val)
> >> + return;
> >> +
> >> + raw_spin_lock(&irq_controller_lock);
> >> +
> >> + grp_val = readl_relaxed(base + GIC_DIST_IGROUP + grp_reg);
> >> + pri_val = readl_relaxed(base + GIC_DIST_PRI + pri_reg);
> >> +
> >> + if (group) {
> >> + grp_val |= grp_mask;
> >> + pri_val |= pri_mask;
> >> + } else {
> >> + grp_val &= ~grp_mask;
> >> + pri_val &= ~pri_mask;
> >> + }
> >> +
> >> + writel_relaxed(grp_val, base + GIC_DIST_IGROUP + grp_reg);
> >> + writel_relaxed(pri_val, base + GIC_DIST_PRI + pri_reg);
> >> +
> >> + raw_spin_unlock(&irq_controller_lock);
> >> +}
> >> +
> >> +/*
> >> + * Test which group an interrupt belongs to.
> >> + *
> >> + * Returns 0 if the controller does not support grouping.
> >> + */
> >> +static int gic_get_group_irq(void __iomem *base, unsigned int hwirq)
> >> +{
> >> + unsigned int grp_reg = hwirq / 32 * 4;
> >> + u32 grp_val;
> >> +
> >> + grp_val = readl_relaxed(base + GIC_DIST_IGROUP + grp_reg);
> >> +
> >> + return (grp_val >> (hwirq % 32)) & 1;
> >> +}
> >> +
> >> +/*
> >> + * Fully acknowledge (both ack and eoi) any outstanding FIQ-based IPI,
> >> + * otherwise do nothing.
> >> + */
> >> +void gic_handle_fiq_ipi(void)
> >> +{
> >> + struct gic_chip_data *gic = &gic_data[0];
> >> + void __iomem *cpu_base = gic_data_cpu_base(gic);
> >> + unsigned long irqstat, irqnr;
> >> +
> >> + if (WARN_ON(!in_nmi()))
> >> + return;
> >> +
> >> + while ((1u << readl_relaxed(cpu_base + GIC_CPU_HIGHPRI)) &
> >> + SMP_IPI_FIQ_MASK) {
> >> + irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK);
> >> + writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
> >> +
> >> + irqnr = irqstat & GICC_IAR_INT_ID_MASK;
> >> + WARN_RATELIMIT(irqnr > 16,
> >> + "Unexpected irqnr %lu (bad prioritization?)\n",
> >> + irqnr);
> >> + }
> >> +}
> >> +
> >> void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
> >> {
> >> if (gic_nr >= MAX_GIC_NR)
> >> @@ -373,7 +469,18 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
> >>
> >> gic_dist_config(base, gic_irqs, NULL);
> >>
> >> - writel_relaxed(1, base + GIC_DIST_CTRL);
> >> + /*
> >> + * Set all global interrupts to be group 1 (this register is
> >> + * RAZ/WI if not accessible in current mode)
> >> + */
> >> + for (i = 32; i < gic_irqs; i += 32)
> >> + writel_relaxed(0xffffffff, base + GIC_DIST_IGROUP + i * 4 / 32);
> >> +
> >> + /*
> >> + * Set EnableGrp1/EnableGrp0 (bit 1 and 0) or EnableGrp (bit 0 only,
> >> + * bit 1 ignored)
> >> + */
> >> + writel_relaxed(3, base + GIC_DIST_CTRL);
> >> }
> >>
> >> static void gic_cpu_init(struct gic_chip_data *gic)
> >> @@ -382,6 +489,7 @@ static void gic_cpu_init(struct gic_chip_data *gic)
> >> void __iomem *base = gic_data_cpu_base(gic);
> >> unsigned int cpu_mask, cpu = smp_processor_id();
> >> int i;
> >> + unsigned long secure_irqs, secure_irq;
> >>
> >> /*
> >> * Get what the GIC says our CPU mask is.
> >> @@ -400,8 +508,27 @@ static void gic_cpu_init(struct gic_chip_data *gic)
> >>
> >> gic_cpu_config(dist_base, NULL);
> >>
> >> + /*
> >> + * Set any PPI and SGI interrupts not set in SMP_IPI_FIQ_MASK
> >> + * to be group 1 (this register is RAZ/WI if not accessible)
> >> + */
> >> + writel_relaxed(~SMP_IPI_FIQ_MASK, dist_base + GIC_DIST_IGROUP + 0);
> >> +
> >> + /*
> >> + * Update the priority of any resulting group0 interrupts.
> >> + */
> >> + secure_irqs = ~readl_relaxed(dist_base + GIC_DIST_IGROUP + 0);
> >> + for_each_set_bit(secure_irq, &secure_irqs, 16)
> >> + gic_set_group_irq(dist_base, i, 0);
> >> +
> >> writel_relaxed(0xf0, base + GIC_CPU_PRIMASK);
> >> - writel_relaxed(1, base + GIC_CPU_CTRL);
> >> +
> >> + /* The bottom most bit will be set for all GIC variants (and is
> >> + * called Enable or EnableGrp0 depending on operating mode). The
> >> + * remaining four bits (CBPR, FIQEn, AckCtl and EnableGrp1) are
> >> + * RAZ/WI if not accessible.
> >> + */
> >> + writel_relaxed(0x1f, base + GIC_CPU_CTRL);
> >> }
> >>
> >> void gic_cpu_if_down(void)
> >> @@ -485,7 +612,7 @@ static void gic_dist_restore(unsigned int gic_nr)
> >> writel_relaxed(gic_data[gic_nr].saved_spi_enable[i],
> >> dist_base + GIC_DIST_ENABLE_SET + i * 4);
> >>
> >> - writel_relaxed(1, dist_base + GIC_DIST_CTRL);
> >> + writel_relaxed(3, dist_base + GIC_DIST_CTRL);
> >> }
> >>
> >> static void gic_cpu_save(unsigned int gic_nr)
> >> @@ -542,7 +669,7 @@ static void gic_cpu_restore(unsigned int gic_nr)
> >> writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4);
> >>
> >> writel_relaxed(0xf0, cpu_base + GIC_CPU_PRIMASK);
> >> - writel_relaxed(1, cpu_base + GIC_CPU_CTRL);
> >> + writel_relaxed(0x1f, cpu_base + GIC_CPU_CTRL);
> >> }
> >>
> >> static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v)
> >> @@ -604,8 +731,19 @@ static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
> >> {
> >> int cpu;
> >> unsigned long flags, map = 0;
> >> + unsigned long softint;
> >>
> >> - raw_spin_lock_irqsave(&irq_controller_lock, flags);
> >> + /*
> >> + * The locking in this function ensures we don't use stale cpu mappings
> >> + * and thus we never route an IPI to the wrong physical core during a
> >> + * big.LITTLE switch. The switch code takes both of these locks meaning
> >> + * we can choose whichever lock is safe to use from our current calling
> >> + * context.
> >> + */
> >> + if (in_nmi())
> >> + raw_spin_lock(&fiq_safe_migration_lock);
> >> + else
> >> + raw_spin_lock_irqsave(&irq_controller_lock, flags);
> >>
> >> /* Convert our logical CPU mask into a physical one. */
> >> for_each_cpu(cpu, mask)
> >> @@ -618,7 +756,15 @@ static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
> >> dmb(ishst);
> >>
> >> /* this always happens on GIC0 */
> >> - writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
> >> + softint = map << 16 | irq;
> >> + if (gic_get_group_irq(gic_data_dist_base(&gic_data[0]), irq))
> >> + softint |= 0x8000;
> >> + writel_relaxed(softint,
> >> + gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
> >> +
> >> + if (in_nmi())
> >> + raw_spin_unlock(&fiq_safe_migration_lock);
> >> + else
> >>
> >> raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
> >> }
> >> @@ -668,7 +814,7 @@ int gic_get_cpu_id(unsigned int cpu)
> >> * Migrate all peripheral interrupts with a target matching the current CPU
> >> * to the interface corresponding to @new_cpu_id. The CPU interface mapping
> >> * is also updated. Targets to other CPU interfaces are unchanged.
> >> - * This must be called with IRQs locally disabled.
> >> + * This must be called with IRQ and FIQ locally disabled.
> >> */
> >> void gic_migrate_target(unsigned int new_cpu_id)
> >> {
> >> @@ -690,6 +836,7 @@ void gic_migrate_target(unsigned int new_cpu_id)
> >> ror_val = (cur_cpu_id - new_cpu_id) & 31;
> >>
> >> raw_spin_lock(&irq_controller_lock);
> >> + raw_spin_lock(&fiq_safe_migration_lock);
> >>
> >> /* Update the target interface for this logical CPU */
> >> gic_cpu_map[cpu] = 1 << new_cpu_id;
> >> @@ -709,6 +856,7 @@ void gic_migrate_target(unsigned int new_cpu_id)
> >> }
> >> }
> >>
> >> + raw_spin_unlock(&fiq_safe_migration_lock);
> >> raw_spin_unlock(&irq_controller_lock);
> >>
> >> /*
> >> diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h
> >> index 45e2d8c..52a5676 100644
> >> --- a/include/linux/irqchip/arm-gic.h
> >> +++ b/include/linux/irqchip/arm-gic.h
> >> @@ -101,5 +101,8 @@ static inline void __init register_routable_domain_ops
> >> {
> >> gic_routable_irq_domain_ops = ops;
> >> }
> >> +
> >> +void gic_handle_fiq_ipi(void);
> >> +
> >> #endif /* __ASSEMBLY */
> >> #endif
> >> --
> >> 1.9.3
> >>
> >
>

--
FTTC broadband for 0.8mile line: currently at 9.5Mbps down 400kbps up
according to speedtest.net.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Felipe Balbi: "Re: bug on ftrace with v3.17-rc5"
Previous message: Julien Grall: "[PATCH] arm{,64}/xen: Remove "EXPERIMENTAL" in the description of the Xen options"
In reply to: Daniel Thompson: "Re: [PATCH 3.17-rc4 v7 4/6] irqchip: gic: Add support for IPI FIQ"
Next in thread: Russell King - ARM Linux: "Re: [PATCH 3.17-rc4 v7 4/6] irqchip: gic: Add support for IPI FIQ"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]