Re: [PATCH] mfd: rtsx: fix PM suspend for 5227 & 5249

[Lee Jones]

On Thu, 18 Sep 2014, micky_ching@xxxxxxxxxxxxxx wrote:

> From: Micky Ching <micky_ching@xxxxxxxxxxxxxx>
> 
> Fix rts5227&5249 failed send buffer cmd after suspend,
> PM_CTRL3 should reset before send any buffer cmd after suspend.
> Otherwise, buffer cmd will failed, this will lead resume fail.
> 
> Signed-off-by: Micky Ching <micky_ching@xxxxxxxxxxxxxx>
> ---
>  drivers/mfd/rts5227.c        |   19 +++++++++++++++++++
>  drivers/mfd/rts5249.c        |    4 ++++
>  drivers/mfd/rtsx_pcr.h       |    1 +
>  include/linux/mfd/rtsx_pci.h |   12 ++++++++++++
>  4 files changed, 36 insertions(+)

I think you'll find you just broke the build.

What happens when you compile these as modules?

> diff --git a/drivers/mfd/rts5227.c b/drivers/mfd/rts5227.c
> index 9c8eec8..8222a31 100644
> --- a/drivers/mfd/rts5227.c
> +++ b/drivers/mfd/rts5227.c
> @@ -128,8 +128,27 @@ static int rts5227_extra_init_hw(struct rtsx_pcr *pcr)
>  	return rtsx_pci_send_cmd(pcr, 100);
>  }
>  
> +int rts5227_pm_reset(struct rtsx_pcr *pcr)
> +{
> +	int err;
> +
> +	/* init aspm */
> +	err = rtsx_pci_update_cfg_byte(pcr, LCTLR, 0xFC, 0);
> +	if (err < 0)
> +		return err;
> +
> +	/* reset PM_CTRL3 before send buffer cmd */
> +	return rtsx_pci_write_register(pcr, PM_CTRL3, 0x10, 0x00);
> +}
> +
>  static int rts5227_optimize_phy(struct rtsx_pcr *pcr)
>  {
> +	int err;
> +
> +	err = rts5227_pm_reset(pcr);
> +	if (err < 0)
> +		return err;
> +
>  	/* Optimize RX sensitivity */
>  	return rtsx_pci_write_phy_register(pcr, 0x00, 0xBA42);
>  }
> diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
> index 573de7b..0f1b0e6 100644
> --- a/drivers/mfd/rts5249.c
> +++ b/drivers/mfd/rts5249.c
> @@ -130,6 +130,10 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr)
>  {
>  	int err;
>  
> +	err = rts5227_pm_reset(pcr);
> +	if (err < 0)
> +		return err;

I don't like this.  Place rts52xx_pm_reset() somewhere more central.
Perhaps an inline function in the header would be better?

>  	err = rtsx_pci_write_phy_register(pcr, PHY_REG_REV,
>  			PHY_REG_REV_RESV | PHY_REG_REV_RXIDLE_LATCHED |
>  			PHY_REG_REV_P1_EN | PHY_REG_REV_RXIDLE_EN |
> diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
> index 07e4c2e..acc7a1e 100644
> --- a/drivers/mfd/rtsx_pcr.h
> +++ b/drivers/mfd/rtsx_pcr.h
> @@ -72,4 +72,5 @@ do {									\
>  	pcr->ms_pull_ctl_disable_tbl = __device##_ms_pull_ctl_disable_tbl; \
>  } while (0)
>  
> +int rts5227_pm_reset(struct rtsx_pcr *pcr);
>  #endif
> diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
> index 74346d5..b34fec8 100644
> --- a/include/linux/mfd/rtsx_pci.h
> +++ b/include/linux/mfd/rtsx_pci.h
> @@ -967,4 +967,16 @@ static inline u8 *rtsx_pci_get_cmd_data(struct rtsx_pcr *pcr)
>  	return (u8 *)(pcr->host_cmds_ptr);
>  }
>  
> +static inline int rtsx_pci_update_cfg_byte(struct rtsx_pcr *pcr, int addr,
> +		u8 mask, u8 append)
> +{
> +	int err;
> +	u8 val;
> +
> +	err = pci_read_config_byte(pcr->pci, addr, &val);
> +	if (err < 0)
> +		return err;
> +	return pci_write_config_byte(pcr->pci, addr, (val & mask) | append);
> +}
> +
>  #endif

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/