[PATCH 18/33] thermal: exynos: add ->tmu_initialize method
From: Bartlomiej Zolnierkiewicz
Date: Thu Sep 18 2014 - 11:34:27 EST
Add ->tmu_initialize method to struct exynos_tmu_data and
use it in exynos_tmu_initialize(). Then add ->tmu_initialize
implementations for Exynos4210, Exynos4412+ and Exynos5440.
Finally remove no longer needed reg->threshold_th[0,1],
reg->intclr_[fall,rise]_shift and reg->intclr_[rise,fall]_mask
abstractions.
There are more improvements available in the future on top
of this patch like merging HW_TRIP level setting with setting
of other levels for Exynos4412+ or adding separate method
for clearing IRQs using INTCLEAR register (for Exynos5420,
Exynos5260 and Exynos4412+).
There should be no functional changes caused by this patch.
Cc: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
Cc: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
Cc: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
Cc: Eduardo Valentin <edubezval@xxxxxxxxx>
Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
drivers/thermal/samsung/exynos_tmu.c | 293 ++++++++++++++++++------------
drivers/thermal/samsung/exynos_tmu.h | 13 --
drivers/thermal/samsung/exynos_tmu_data.c | 32 ----
3 files changed, 174 insertions(+), 164 deletions(-)
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 80b781d..8dc5bf6 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -52,6 +52,7 @@
* @temp_error2: fused value of the second point trim.
* @regulator: pointer to the TMU regulator structure.
* @reg_conf: pointer to structure to register with core thermal.
+ * @tmu_initialize: SoC specific TMU initialization method
*/
struct exynos_tmu_data {
int id;
@@ -66,6 +67,7 @@ struct exynos_tmu_data {
u8 temp_error1, temp_error2;
struct regulator *regulator;
struct thermal_sensor_conf *reg_conf;
+ int (*tmu_initialize)(struct platform_device *pdev);
};
/*
@@ -163,120 +165,13 @@ static u32 get_th_reg(struct exynos_tmu_data *data, u32 threshold, bool falling)
static int exynos_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- struct exynos_tmu_platform_data *pdata = data->pdata;
- const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int status, trim_info = 0, con, ctrl;
- unsigned int rising_threshold = 0, falling_threshold = 0;
- int ret = 0, threshold_code, i;
+ int ret;
mutex_lock(&data->lock);
clk_enable(data->clk);
if (!IS_ERR(data->clk_sec))
clk_enable(data->clk_sec);
-
- if (data->soc != SOC_ARCH_EXYNOS5440) {
- status = readb(data->base + EXYNOS_TMU_REG_STATUS);
- if (!status) {
- ret = -EBUSY;
- goto out;
- }
- }
-
- if (data->soc == SOC_ARCH_EXYNOS3250 ||
- data->soc == SOC_ARCH_EXYNOS4412 ||
- data->soc == SOC_ARCH_EXYNOS5250) {
- if (data->soc == SOC_ARCH_EXYNOS3250) {
- ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON1);
- ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE;
- writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON1);
- }
- ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON2);
- ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE;
- writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON2);
- }
-
- /* Save trimming info in order to perform calibration */
- if (data->soc == SOC_ARCH_EXYNOS5440) {
- /*
- * For exynos5440 soc triminfo value is swapped between TMU0 and
- * TMU2, so the below logic is needed.
- */
- switch (data->id) {
- case 0:
- trim_info = readl(data->base +
- EXYNOS5440_EFUSE_SWAP_OFFSET + EXYNOS5440_TMU_S0_7_TRIM);
- break;
- case 1:
- trim_info = readl(data->base + EXYNOS5440_TMU_S0_7_TRIM);
- break;
- case 2:
- trim_info = readl(data->base -
- EXYNOS5440_EFUSE_SWAP_OFFSET + EXYNOS5440_TMU_S0_7_TRIM);
- }
- } else {
- /* On exynos5420 the triminfo register is in the shared space */
- if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO)
- trim_info = readl(data->base_second +
- EXYNOS_TMU_REG_TRIMINFO);
- else
- trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
- }
- sanitize_temp_error(data, trim_info);
-
- if (data->soc == SOC_ARCH_EXYNOS4210) {
- /* Write temperature code for threshold */
- threshold_code = temp_to_code(data, pdata->threshold);
- writeb(threshold_code,
- data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
- for (i = 0; i < pdata->non_hw_trigger_levels; i++)
- writeb(pdata->trigger_levels[i], data->base +
- reg->threshold_th0 + i * sizeof(reg->threshold_th0));
-
- writel(reg->intclr_rise_mask, data->base + reg->tmu_intclear);
- } else {
- /* Write temperature code for rising and falling threshold */
- rising_threshold = readl(data->base + reg->threshold_th0);
- rising_threshold = get_th_reg(data, rising_threshold, false);
- if (data->soc != SOC_ARCH_EXYNOS5440)
- falling_threshold = get_th_reg(data, 0, true);
-
- writel(rising_threshold,
- data->base + reg->threshold_th0);
- writel(falling_threshold,
- data->base + reg->threshold_th1);
-
- writel((reg->intclr_rise_mask << reg->intclr_rise_shift) |
- (reg->intclr_fall_mask << reg->intclr_fall_shift),
- data->base + reg->tmu_intclear);
-
- /* if last threshold limit is also present */
- i = pdata->max_trigger_level - 1;
- if (pdata->trigger_levels[i] &&
- (pdata->trigger_type[i] == HW_TRIP)) {
- threshold_code = temp_to_code(data,
- pdata->trigger_levels[i]);
- if (data->soc != SOC_ARCH_EXYNOS5440) {
- /* 1-4 level to be assigned in th0 reg */
- rising_threshold &= ~(0xff << 8 * i);
- rising_threshold |= threshold_code << 8 * i;
- writel(rising_threshold,
- data->base + EXYNOS_THD_TEMP_RISE);
- } else {
- /* 5th level to be assigned in th2 reg */
- rising_threshold =
- threshold_code << EXYNOS5440_TMU_TH_RISE4_SHIFT;
- writel(rising_threshold,
- data->base + EXYNOS5440_TMU_S0_7_TH2);
- }
- con = readl(data->base + reg->tmu_ctrl);
- con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
- writel(con, data->base + reg->tmu_ctrl);
- }
- }
- /*Clear the PMIN in the common TMU register*/
- if (data->soc == SOC_ARCH_EXYNOS5440 && !data->id)
- writel(0, data->base_second + EXYNOS5440_TMU_PMIN);
-out:
+ ret = data->tmu_initialize(pdev);
clk_disable(data->clk);
mutex_unlock(&data->lock);
if (!IS_ERR(data->clk_sec))
@@ -332,6 +227,158 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
mutex_unlock(&data->lock);
}
+static int exynos4210_tmu_initialize(struct platform_device *pdev)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ struct exynos_tmu_platform_data *pdata = data->pdata;
+ unsigned int status;
+ int ret = 0, threshold_code, i;
+
+ status = readb(data->base + EXYNOS_TMU_REG_STATUS);
+ if (!status) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ sanitize_temp_error(data, readl(data->base + EXYNOS_TMU_REG_TRIMINFO));
+
+ /* Write temperature code for threshold */
+ threshold_code = temp_to_code(data, pdata->threshold);
+ writeb(threshold_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
+
+ for (i = 0; i < pdata->non_hw_trigger_levels; i++)
+ writeb(pdata->trigger_levels[i], data->base +
+ EXYNOS4210_TMU_REG_TRIG_LEVEL0 + i * 4);
+
+ writel(EXYNOS4210_TMU_TRIG_LEVEL_MASK,
+ data->base + EXYNOS_TMU_REG_INTCLEAR);
+out:
+ return ret;
+}
+
+static int exynos4412_tmu_initialize(struct platform_device *pdev)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ struct exynos_tmu_platform_data *pdata = data->pdata;
+ unsigned int status, trim_info, con, ctrl, rising_threshold;
+ int ret = 0, threshold_code, i;
+
+ status = readb(data->base + EXYNOS_TMU_REG_STATUS);
+ if (!status) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ if (data->soc == SOC_ARCH_EXYNOS3250 ||
+ data->soc == SOC_ARCH_EXYNOS4412 ||
+ data->soc == SOC_ARCH_EXYNOS5250) {
+ if (data->soc == SOC_ARCH_EXYNOS3250) {
+ ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON1);
+ ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE;
+ writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON1);
+ }
+ ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON2);
+ ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE;
+ writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON2);
+ }
+
+ /* On exynos5420 the triminfo register is in the shared space */
+ if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO)
+ trim_info = readl(data->base_second + EXYNOS_TMU_REG_TRIMINFO);
+ else
+ trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
+
+ sanitize_temp_error(data, trim_info);
+
+ /* Write temperature code for rising and falling threshold */
+ rising_threshold = readl(data->base + EXYNOS_THD_TEMP_RISE);
+ rising_threshold = get_th_reg(data, rising_threshold, false);
+ writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE);
+ writel(get_th_reg(data, 0, true), data->base + EXYNOS_THD_TEMP_FALL);
+
+ if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO ||
+ data->soc == SOC_ARCH_EXYNOS5420)
+ writel((EXYNOS_TMU_RISE_INT_MASK << EXYNOS_TMU_RISE_INT_SHIFT) |
+ (EXYNOS_TMU_FALL_INT_MASK << EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT),
+ data->base + EXYNOS_TMU_REG_INTCLEAR);
+ else if (data->soc == SOC_ARCH_EXYNOS5260)
+ writel((EXYNOS5260_TMU_RISE_INT_MASK << EXYNOS_TMU_RISE_INT_SHIFT) |
+ (EXYNOS5260_TMU_FALL_INT_MASK << EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT),
+ data->base + EXYNOS_TMU_REG_INTCLEAR);
+ else
+ writel((EXYNOS_TMU_RISE_INT_MASK << EXYNOS_TMU_RISE_INT_SHIFT) |
+ (EXYNOS_TMU_FALL_INT_MASK << EXYNOS_TMU_CLEAR_FALL_INT_SHIFT),
+ data->base + EXYNOS_TMU_REG_INTCLEAR);
+
+ /* if last threshold limit is also present */
+ i = pdata->max_trigger_level - 1;
+ if (pdata->trigger_levels[i] && pdata->trigger_type[i] == HW_TRIP) {
+ threshold_code = temp_to_code(data, pdata->trigger_levels[i]);
+ /* 1-4 level to be assigned in th0 reg */
+ rising_threshold &= ~(0xff << 8 * i);
+ rising_threshold |= threshold_code << 8 * i;
+ writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE);
+ con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
+ con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
+ writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
+ }
+out:
+ return ret;
+}
+
+static int exynos5440_tmu_initialize(struct platform_device *pdev)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ struct exynos_tmu_platform_data *pdata = data->pdata;
+ unsigned int trim_info = 0, con, rising_threshold;
+ int ret = 0, threshold_code, i;
+
+ /*
+ * For exynos5440 soc triminfo value is swapped between TMU0 and
+ * TMU2, so the below logic is needed.
+ */
+ switch (data->id) {
+ case 0:
+ trim_info = readl(data->base + EXYNOS5440_EFUSE_SWAP_OFFSET +
+ EXYNOS5440_TMU_S0_7_TRIM);
+ break;
+ case 1:
+ trim_info = readl(data->base + EXYNOS5440_TMU_S0_7_TRIM);
+ break;
+ case 2:
+ trim_info = readl(data->base - EXYNOS5440_EFUSE_SWAP_OFFSET +
+ EXYNOS5440_TMU_S0_7_TRIM);
+ }
+ sanitize_temp_error(data, trim_info);
+
+ /* Write temperature code for rising and falling threshold */
+ rising_threshold = readl(data->base + EXYNOS5440_TMU_S0_7_TH0);
+ rising_threshold = get_th_reg(data, rising_threshold, false);
+ writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH0);
+ writel(0, data->base + EXYNOS5440_TMU_S0_7_TH1);
+
+ writel((EXYNOS5440_TMU_RISE_INT_MASK << EXYNOS5440_TMU_RISE_INT_SHIFT) |
+ (EXYNOS5440_TMU_FALL_INT_MASK << EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT),
+ data->base + EXYNOS5440_TMU_S0_7_IRQ);
+
+ /* if last threshold limit is also present */
+ i = pdata->max_trigger_level - 1;
+ if (pdata->trigger_levels[i] && pdata->trigger_type[i] == HW_TRIP) {
+ threshold_code = temp_to_code(data, pdata->trigger_levels[i]);
+ /* 5th level to be assigned in th2 reg */
+ rising_threshold =
+ threshold_code << EXYNOS5440_TMU_TH_RISE4_SHIFT;
+ writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH2);
+ con = readl(data->base + EXYNOS5440_TMU_S0_7_CTRL);
+ con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
+ writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL);
+ }
+ /* Clear the PMIN in the common TMU register */
+ if (!data->id)
+ writel(0, data->base_second + EXYNOS5440_TMU_PMIN);
+ return ret;
+}
+
static int exynos_tmu_read(struct exynos_tmu_data *data)
{
struct exynos_tmu_platform_data *pdata = data->pdata;
@@ -628,16 +675,24 @@ static int exynos_tmu_probe(struct platform_device *pdev)
goto err_clk_sec;
}
- if (pdata->type == SOC_ARCH_EXYNOS3250 ||
- pdata->type == SOC_ARCH_EXYNOS4210 ||
- pdata->type == SOC_ARCH_EXYNOS4412 ||
- pdata->type == SOC_ARCH_EXYNOS5250 ||
- pdata->type == SOC_ARCH_EXYNOS5260 ||
- pdata->type == SOC_ARCH_EXYNOS5420 ||
- pdata->type == SOC_ARCH_EXYNOS5420_TRIMINFO ||
- pdata->type == SOC_ARCH_EXYNOS5440)
- data->soc = pdata->type;
- else {
+ data->soc = pdata->type;
+
+ switch (data->soc) {
+ case SOC_ARCH_EXYNOS4210:
+ data->tmu_initialize = exynos4210_tmu_initialize;
+ break;
+ case SOC_ARCH_EXYNOS3250:
+ case SOC_ARCH_EXYNOS4412:
+ case SOC_ARCH_EXYNOS5250:
+ case SOC_ARCH_EXYNOS5260:
+ case SOC_ARCH_EXYNOS5420:
+ case SOC_ARCH_EXYNOS5420_TRIMINFO:
+ data->tmu_initialize = exynos4412_tmu_initialize;
+ break;
+ case SOC_ARCH_EXYNOS5440:
+ data->tmu_initialize = exynos5440_tmu_initialize;
+ break;
+ default:
ret = -EINVAL;
dev_err(&pdev->dev, "Platform not supported\n");
goto err_clk;
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index 02ef3b0..f186f4f 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -73,8 +73,6 @@ enum soc_type {
* slightly across different exynos SOC's.
* @tmu_ctrl: TMU main controller register.
* @tmu_cur_temp: register containing the current temperature of the TMU.
- * @threshold_th0: Register containing first set of rising levels.
- * @threshold_th1: Register containing second set of rising levels.
* @tmu_inten: register containing the different threshold interrupt
enable bits.
* @inten_rise0_shift: shift bits of rising 0 interrupt bits.
@@ -84,10 +82,6 @@ enum soc_type {
* @inten_fall0_shift: shift bits of falling 0 interrupt bits.
* @tmu_intstat: Register containing the interrupt status values.
* @tmu_intclear: Register for clearing the raised interrupt status.
- * @intclr_fall_shift: shift bits for interrupt clear fall 0
- * @intclr_rise_shift: shift bits of all rising interrupt bits.
- * @intclr_rise_mask: mask bits of all rising interrupt bits.
- * @intclr_fall_mask: mask bits of all rising interrupt bits.
* @emul_con: TMU emulation controller register.
*/
struct exynos_tmu_registers {
@@ -95,9 +89,6 @@ struct exynos_tmu_registers {
u32 tmu_cur_temp;
- u32 threshold_th0;
- u32 threshold_th1;
-
u32 tmu_inten;
u32 inten_rise0_shift;
u32 inten_rise1_shift;
@@ -108,10 +99,6 @@ struct exynos_tmu_registers {
u32 tmu_intstat;
u32 tmu_intclear;
- u32 intclr_fall_shift;
- u32 intclr_rise_shift;
- u32 intclr_fall_mask;
- u32 intclr_rise_mask;
u32 emul_con;
};
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index 27782ac..db3b3bc 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -28,7 +28,6 @@
static const struct exynos_tmu_registers exynos4210_tmu_registers = {
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
- .threshold_th0 = EXYNOS4210_TMU_REG_TRIG_LEVEL0,
.tmu_inten = EXYNOS_TMU_REG_INTEN,
.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
@@ -36,7 +35,6 @@ static const struct exynos_tmu_registers exynos4210_tmu_registers = {
.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .intclr_rise_mask = EXYNOS4210_TMU_TRIG_LEVEL_MASK,
};
struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
@@ -84,8 +82,6 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
static const struct exynos_tmu_registers exynos3250_tmu_registers = {
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
- .threshold_th0 = EXYNOS_THD_TEMP_RISE,
- .threshold_th1 = EXYNOS_THD_TEMP_FALL,
.tmu_inten = EXYNOS_TMU_REG_INTEN,
.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
@@ -93,10 +89,6 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = {
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
.emul_con = EXYNOS_EMUL_CON,
};
@@ -157,8 +149,6 @@ struct exynos_tmu_init_data const exynos3250_default_tmu_data = {
static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
- .threshold_th0 = EXYNOS_THD_TEMP_RISE,
- .threshold_th1 = EXYNOS_THD_TEMP_FALL,
.tmu_inten = EXYNOS_TMU_REG_INTEN,
.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
@@ -167,10 +157,6 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
.emul_con = EXYNOS_EMUL_CON,
};
@@ -243,8 +229,6 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
static const struct exynos_tmu_registers exynos5260_tmu_registers = {
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
- .threshold_th0 = EXYNOS_THD_TEMP_RISE,
- .threshold_th1 = EXYNOS_THD_TEMP_FALL,
.tmu_inten = EXYNOS5260_TMU_REG_INTEN,
.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
@@ -253,10 +237,6 @@ static const struct exynos_tmu_registers exynos5260_tmu_registers = {
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR,
- .intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS5260_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS5260_TMU_FALL_INT_MASK,
.emul_con = EXYNOS5260_EMUL_CON,
};
@@ -319,8 +299,6 @@ struct exynos_tmu_init_data const exynos5260_default_tmu_data = {
static const struct exynos_tmu_registers exynos5420_tmu_registers = {
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
- .threshold_th0 = EXYNOS_THD_TEMP_RISE,
- .threshold_th1 = EXYNOS_THD_TEMP_FALL,
.tmu_inten = EXYNOS_TMU_REG_INTEN,
.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
@@ -330,10 +308,6 @@ static const struct exynos_tmu_registers exynos5420_tmu_registers = {
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
.emul_con = EXYNOS_EMUL_CON,
};
@@ -402,8 +376,6 @@ struct exynos_tmu_init_data const exynos5420_default_tmu_data = {
static const struct exynos_tmu_registers exynos5440_tmu_registers = {
.tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
.tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
- .threshold_th0 = EXYNOS5440_TMU_S0_7_TH0,
- .threshold_th1 = EXYNOS5440_TMU_S0_7_TH1,
.tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN,
.inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT,
@@ -412,10 +384,6 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = {
.inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
.tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
- .intclr_fall_shift = EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
.emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
};
--
1.8.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/