[PATCH V2 06/24] MIPS: Add hook to get C0 performance counter interrupt
From: Andrew Bresticker
Date: Thu Sep 18 2014 - 17:53:16 EST
The hardware perf event driver and oprofile interpret the global
cp0_perfcount_irq differently: in the hardware perf event driver
it is an offset from MIPS_CPU_IRQ_BASE and in oprofile it is the
actual IRQ number. This still works most of the time since
MIPS_CPU_IRQ_BASE is usually 0, but is clearly wrong. Since the
performance counter interrupt may vary from platform to platform
like the C0 timer interrupt, add the optional get_c0_perfcount_int
hook which returns the IRQ number of the performance counter.
The hook should return < 0 if the performance counter interrupt is
shared with the timer. If the hook is not present, the CPU vector
reported in C0_IntCtl (cp0_perfcount_irq) is used.
Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
Reviewed-by: Qais Yousef <qais.yousef@xxxxxxxxxx>
Tested-by: Qais Yousef <qais.yousef@xxxxxxxxxx>
---
No changes from v1.
---
arch/mips/ath79/irq.c | 1 -
arch/mips/ath79/setup.c | 5 +++++
arch/mips/include/asm/time.h | 1 +
arch/mips/kernel/perf_event_mipsxx.c | 23 +++++++----------------
arch/mips/lantiq/irq.c | 8 +++++++-
arch/mips/mti-malta/malta-time.c | 16 ++++++----------
arch/mips/mti-sead3/sead3-time.c | 7 ++++---
arch/mips/oprofile/op_model_mipsxx.c | 18 ++++++++++++++----
arch/mips/ralink/irq.c | 8 +++++++-
9 files changed, 51 insertions(+), 36 deletions(-)
diff --git a/arch/mips/ath79/irq.c b/arch/mips/ath79/irq.c
index 9c0e176..6adae36 100644
--- a/arch/mips/ath79/irq.c
+++ b/arch/mips/ath79/irq.c
@@ -359,7 +359,6 @@ void __init arch_init_irq(void)
BUG();
}
- cp0_perfcount_irq = ATH79_MISC_IRQ(5);
mips_cpu_irq_init();
ath79_misc_irq_init();
diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index 64807a4..a73c93c 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -182,6 +182,11 @@ const char *get_system_type(void)
return ath79_sys_type;
}
+int get_c0_perfcount_int(void)
+{
+ return ATH79_MISC_IRQ(5);
+}
+
unsigned int get_c0_compare_int(void)
{
return CP0_LEGACY_COMPARE_IRQ;
diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
index 8f3047d..7969933 100644
--- a/arch/mips/include/asm/time.h
+++ b/arch/mips/include/asm/time.h
@@ -46,6 +46,7 @@ extern unsigned int mips_hpt_frequency;
* so it lives here.
*/
extern int (*perf_irq)(void);
+extern int __weak get_c0_perfcount_int(void);
/*
* Initialize the calling CPU's compare interrupt as clockevent device
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index b63f248..3a25096 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -1614,22 +1614,13 @@ init_hw_perf_events(void)
counters = counters_total_to_per_cpu(counters);
#endif
-#ifdef MSC01E_INT_BASE
- if (cpu_has_veic) {
- /*
- * Using platform specific interrupt controller defines.
- */
- irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR;
- } else {
-#endif
- if ((cp0_perfcount_irq >= 0) &&
- (cp0_compare_irq != cp0_perfcount_irq))
- irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
- else
- irq = -1;
-#ifdef MSC01E_INT_BASE
- }
-#endif
+ if (get_c0_perfcount_int)
+ irq = get_c0_perfcount_int();
+ else if ((cp0_perfcount_irq >= 0) &&
+ (cp0_compare_irq != cp0_perfcount_irq))
+ irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
+ else
+ irq = -1;
mipspmu.map_raw_event = mipsxx_pmu_map_raw_event;
diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
index 030568a..21c38ee 100644
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -70,6 +70,7 @@ static struct resource ltq_eiu_irq[MAX_EIU];
static void __iomem *ltq_icu_membase[MAX_IM];
static void __iomem *ltq_eiu_membase;
static struct irq_domain *ltq_domain;
+static int ltq_perfcount_irq;
int ltq_eiu_get_irq(int exin)
{
@@ -449,7 +450,7 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
#endif
/* tell oprofile which irq to use */
- cp0_perfcount_irq = irq_create_mapping(ltq_domain, LTQ_PERF_IRQ);
+ ltq_perfcount_irq = irq_create_mapping(ltq_domain, LTQ_PERF_IRQ);
/*
* if the timer irq is not one of the mips irqs we need to
@@ -461,6 +462,11 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
return 0;
}
+int get_c0_perfcount_int(void)
+{
+ return ltq_perfcount_irq;
+}
+
unsigned int get_c0_compare_int(void)
{
return MIPS_CPU_TIMER_IRQ;
diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c
index 3778a35..a4e035c 100644
--- a/arch/mips/mti-malta/malta-time.c
+++ b/arch/mips/mti-malta/malta-time.c
@@ -121,22 +121,20 @@ void read_persistent_clock(struct timespec *ts)
ts->tv_nsec = 0;
}
-static void __init plat_perf_setup(void)
+int get_c0_perfcount_int(void)
{
-#ifdef MSC01E_INT_BASE
if (cpu_has_veic) {
set_vi_handler(MSC01E_INT_PERFCTR, mips_perf_dispatch);
mips_cpu_perf_irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR;
- } else
-#endif
- if (cp0_perfcount_irq >= 0) {
+ } else if (cp0_perfcount_irq >= 0) {
if (cpu_has_vint)
set_vi_handler(cp0_perfcount_irq, mips_perf_dispatch);
mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
-#ifdef CONFIG_SMP
- irq_set_handler(mips_cpu_perf_irq, handle_percpu_irq);
-#endif
+ } else {
+ mips_cpu_perf_irq = -1;
}
+
+ return mips_cpu_perf_irq;
}
unsigned int get_c0_compare_int(void)
@@ -201,6 +199,4 @@ void __init plat_time_init(void)
#endif
}
#endif
-
- plat_perf_setup();
}
diff --git a/arch/mips/mti-sead3/sead3-time.c b/arch/mips/mti-sead3/sead3-time.c
index 678d03d..f090c51 100644
--- a/arch/mips/mti-sead3/sead3-time.c
+++ b/arch/mips/mti-sead3/sead3-time.c
@@ -81,13 +81,16 @@ void read_persistent_clock(struct timespec *ts)
ts->tv_nsec = 0;
}
-static void __init plat_perf_setup(void)
+int get_c0_perfcount_int(void)
{
if (cp0_perfcount_irq >= 0) {
if (cpu_has_vint)
set_vi_handler(cp0_perfcount_irq, mips_perf_dispatch);
mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
+ } else {
+ mips_cpu_perf_irq = -1;
}
+ return mips_cpu_perf_irq;
}
unsigned int get_c0_compare_int(void)
@@ -108,6 +111,4 @@ void __init plat_time_init(void)
(est_freq % 1000000) * 100 / 1000000);
mips_scroll_message();
-
- plat_perf_setup();
}
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index 42821ae..01f721a 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -11,6 +11,7 @@
#include <linux/interrupt.h>
#include <linux/smp.h>
#include <asm/irq_regs.h>
+#include <asm/time.h>
#include "op_impl.h"
@@ -35,6 +36,7 @@
#define M_PERFCTL_COUNT_ALL_THREADS (1UL << 13)
static int (*save_perf_irq)(void);
+static int perfcount_irq;
/*
* XLR has only one set of counters per core. Designate the
@@ -431,8 +433,16 @@ static int __init mipsxx_init(void)
save_perf_irq = perf_irq;
perf_irq = mipsxx_perfcount_handler;
- if ((cp0_perfcount_irq >= 0) && (cp0_compare_irq != cp0_perfcount_irq))
- return request_irq(cp0_perfcount_irq, mipsxx_perfcount_int,
+ if (get_c0_perfcount_int)
+ perfcount_irq = get_c0_perfcount_int();
+ else if ((cp0_perfcount_irq >= 0) &&
+ (cp0_compare_irq != cp0_perfcount_irq))
+ perfcount_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
+ else
+ perfcount_irq = -1;
+
+ if (perfcount_irq >= 0)
+ return request_irq(perfcount_irq, mipsxx_perfcount_int,
0, "Perfcounter", save_perf_irq);
return 0;
@@ -442,8 +452,8 @@ static void mipsxx_exit(void)
{
int counters = op_model_mipsxx_ops.num_counters;
- if ((cp0_perfcount_irq >= 0) && (cp0_compare_irq != cp0_perfcount_irq))
- free_irq(cp0_perfcount_irq, save_perf_irq);
+ if (perfcount_irq >= 0)
+ free_irq(perfcount_irq, save_perf_irq);
counters = counters_per_cpu_to_total(counters);
on_each_cpu(reset_counters, (void *)(long)counters, 1);
diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
index 0495011..7634dcd 100644
--- a/arch/mips/ralink/irq.c
+++ b/arch/mips/ralink/irq.c
@@ -45,6 +45,7 @@
#define RALINK_INTC_IRQ_PERFC (RALINK_INTC_IRQ_BASE + 9)
static void __iomem *rt_intc_membase;
+static int rt_perfcount_irq;
static inline void rt_intc_w32(u32 val, unsigned reg)
{
@@ -73,6 +74,11 @@ static struct irq_chip ralink_intc_irq_chip = {
.irq_mask_ack = ralink_intc_irq_mask,
};
+int get_c0_perfcount_int(void)
+{
+ return rt_perfcount_irq;
+}
+
unsigned int get_c0_compare_int(void)
{
return CP0_LEGACY_COMPARE_IRQ;
@@ -167,7 +173,7 @@ static int __init intc_of_init(struct device_node *node,
irq_set_handler_data(irq, domain);
/* tell the kernel which irq is used for performance monitoring */
- cp0_perfcount_irq = irq_create_mapping(domain, 9);
+ rt_perfcount_irq = irq_create_mapping(domain, 9);
return 0;
}
--
2.1.0.rc2.206.gedb03e5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/