PLLs on Rockchip platforms report their locking state in an externalThis patch works on my rk3288 evb, so,
register situated in the "General Register Files" which is provided
through a syscon device.
When the initial clk init runs, this syscon is of course not yet
available, making it impossible to set PLLs to other frequencies
through the assigned-rate property of the clock-controller node.
Syscon devices are initialized through a postcore initcall, so add an
arch_initcall to rerun the rockchip specific clock initalization when
the GRF is available.
As the clock init already runs two times (through of_clk_add_provider
and of_clk_init), a third time shouldn't hurt to much and in the best
case wouldn't change any settings at all.
Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
---
drivers/clk/rockchip/clk.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/clk/rockchip/clk.c b/drivers/clk/rockchip/clk.c
index 9a3adb1..e14b108 100644
--- a/drivers/clk/rockchip/clk.c
+++ b/drivers/clk/rockchip/clk.c
@@ -23,6 +23,7 @@
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
+#include <linux/clk/clk-conf.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include "clk.h"
@@ -126,6 +127,18 @@ void __init rockchip_clk_init(struct device_node *np, void __iomem *base,
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
}
+/**
+ * Set clock-defaults again, after grf regmap is available for PLLs.
+ */
+static int __init rockchip_clk_set_defaults(void)
+{
+ if (cru_node)
+ return of_clk_set_defaults(cru_node, true);
+
+ return 0;
+}
+arch_initcall(rockchip_clk_set_defaults);
+
struct regmap *rockchip_clk_get_grf(void)
{
if (IS_ERR(grf))