[PATCH v4] checkkconfigsymbols.sh: reimplementation in python

[Valentin Rothberg]

The scripts/checkkconfigsymbols.sh script searches Kconfig features
in the source code that are not defined in Kconfig. Such identifiers
always evaluate to false and are the source of various kinds of bugs.
However, the shell script is slow and it does not detect such broken
references in Kbuild and Kconfig files (e.g., ``depends on UNDEFINEDÂÂ).
Furthermore, it generates false positives (4 of 526 in v3.17-rc1).
The script is also hard to read and understand, and is thereby difficult
to maintain.

This patch replaces the shell script with an implementation in Python,
which:
    (a) detects the same bugs, but does not report previous false positives
    (b) additionally detects broken references in Kconfig and all
        non-Kconfig files, such as Kbuild, .[cSh], .txt, .sh, defconfig, etc.
    (c) is up to 75 times faster than the shell script

The new script reduces the runtime on my machine (i7-2620M, 8GB RAM, SSD)
from 3m47s to 0m3s, and reports 939 broken references in Linux v3.17-rc1;
543 additional reports of which 16 are located in Kconfig files,
287 in defconfigs, 66 in ./Documentation, 1 in Kbuild.

Moreover, we intentionally include references in C comments, which have been
ignored until now. Such comments may be leftovers of features that have
been removed or renamed in Kconfig (e.g., ``#endif /* CONFIG_MPC52xx */ÂÂ).
These references can be misleading and should be removed or replaced.

Note that the output format changed from (file list <tab> feature) to
(feature <tab> file list) as it simplifies the detection of the Kconfig
feature for long file lists.

Signed-off-by: Valentin Rothberg <valentinrothberg@xxxxxxxxx>
Signed-off-by: Stefan Hengelein <stefan.hengelein@xxxxxx>
---
Changelog:
v2: Fix of regular expressions
v3: Changelog replacement, and add changes of v2
v4: Based on comments from Paul Bolle <pebolle@xxxxxxxxxx>
    - Inclusion of all non-Kconfig files, such as .txt, .sh, etc.
    - Changes of regular expressions
    - Increases additional reports from 49 to 229 compared to v3
    - Change of output format from (file list <tab> feature) to
      (feature <tab> file list)Â
---

 scripts/checkkconfigsymbols.py | 136 +++++++++++++++++++++++++++++++++++++++++
 scripts/checkkconfigsymbols.sh |  59 ------------------
 2 files changed, 136 insertions(+), 59 deletions(-)
 create mode 100644 scripts/checkkconfigsymbols.py
 delete mode 100755 scripts/checkkconfigsymbols.sh

diff --git a/scripts/checkkconfigsymbols.py b/scripts/checkkconfigsymbols.py
new file mode 100644
index 0000000..74c18b1
--- /dev/null
+++ b/scripts/checkkconfigsymbols.py
@@ -0,0 +1,136 @@
+#!/usr/bin/env python
+
+"""Find Kconfig identifieres that are referenced but not defined."""
+
+# Copyright (C) 2014 Valentin Rothberg <valentinrothberg@xxxxxxxxx>
+# Copyright (C) 2014 Stefan Hengelein <stefan.hengelein@xxxxxx>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+
+
+import os
+import re
+
+
+# REGEX EXPRESSIONS
+OPERATORS = r"&|\(|\)|\||\!"
+FEATURE = r"\w*[A-Z]{1}\w*"
+CONFIG_DEF = r"^\s*(?:menu){,1}config\s+(" + FEATURE + r")\s*"
+EXPR = r"(?:" + OPERATORS + r"|\s|" + FEATURE + r")+"
+STMT = r"^\s*(?:if|select|depends\s+on)\s+" + EXPR
+
+# REGEX OBJECTS
+REGEX_FILE_KCONFIG = re.compile(r"Kconfig[\.\w+\-]*$")
+REGEX_FEATURE = re.compile(r"(" + FEATURE + r")")
+REGEX_SOURCE_FEATURE = re.compile(r"(?:D|\W|\b)+CONFIG_(" + FEATURE + r")")
+REGEX_KCONFIG_DEF = re.compile(CONFIG_DEF)
+REGEX_KCONFIG_EXPR = re.compile(EXPR)
+REGEX_KCONFIG_STMT = re.compile(STMT)
+REGEX_KCONFIG_HELP = re.compile(r"^\s+(help|---help---)\s*$")
+REGEX_FILTER_FEATURES = re.compile(r"[A-Za-z0-9]$")
+
+
+def main():
+    """Main function of this module."""
+    source_files = []
+    kconfig_files = []
+    defined_features = set()
+    referenced_features = dict()
+
+    for root, subdirs, files in os.walk("."):
+        if ".git" in subdirs:
+            subdirs.remove(".git")
+        for fil in files:
+            if REGEX_FILE_KCONFIG.match(fil):
+                kconfig_files.append(os.path.join(root, fil))
+            else:
+                # All non-Kconfig files are checked for consistency
+                source_files.append(os.path.join(root, fil))
+
+    for sfile in source_files:
+        parse_source_file(sfile, referenced_features)
+
+    for kfile in kconfig_files:
+        parse_kconfig_file(kfile, defined_features, referenced_features)
+
+    print "Undefined symbol used\tFile list"
+    for feature in sorted(referenced_features):
+        if feature not in defined_features:
+            if feature.endswith("_MODULE"):
+                # Avoid false positives for kernel modules
+                if feature[:-len("_MODULE")] in defined_features:
+                    continue
+            if "FOO" in feature or "BAR" in feature:
+                continue
+            files = referenced_features.get(feature)
+            print "%s:\t%s" % (feature, ", ".join(files))
+
+
+def parse_source_file(sfile, referenced_features):
+    """Parse @sfile for referenced Kconfig features."""
+    lines = []
+    with open(sfile, "r") as stream:
+        lines = stream.readlines()
+
+    for line in lines:
+        if not "CONFIG_" in line:
+            continue
+        features = REGEX_SOURCE_FEATURE.findall(line)
+        for feature in features:
+            if not REGEX_FILTER_FEATURES.search(feature):
+                continue
+            paths = referenced_features.get(feature, set())
+            paths.add(sfile)
+            referenced_features[feature] = paths
+
+
+def get_features_in_line(line):
+    """Return mentioned Kconfig features in @line."""
+    return REGEX_FEATURE.findall(line)
+
+
+def parse_kconfig_file(kfile, defined_features, referenced_features):
+    """Parse @kfile and update feature definitions and references."""
+    lines = []
+    skip = False
+
+    with open(kfile, "r") as stream:
+        lines = stream.readlines()
+
+    for i in range(len(lines)):
+        line = lines[i]
+        line = line.strip('\n')
+        line = line.split("#")[0]  # Ignore Kconfig comments
+
+        if REGEX_KCONFIG_DEF.match(line):
+            feature_def = REGEX_KCONFIG_DEF.findall(line)
+            defined_features.add(feature_def[0])
+            skip = False
+        elif REGEX_KCONFIG_HELP.match(line):
+            skip = True
+        elif skip:
+            # Ignore content of help messages
+            pass
+        elif REGEX_KCONFIG_STMT.match(line):
+            features = get_features_in_line(line)
+            # Multi-line statements
+            while line.endswith("\\"):
+                i += 1
+                line = lines[i]
+                line = line.strip('\n')
+                features.extend(get_features_in_line(line))
+            for feature in set(features):
+                paths = referenced_features.get(feature, set())
+                paths.add(kfile)
+                referenced_features[feature] = paths
+
+
+if __name__ == "__main__":
+    main()
diff --git a/scripts/checkkconfigsymbols.sh b/scripts/checkkconfigsymbols.sh
deleted file mode 100755
index ccb3391..0000000
--- a/scripts/checkkconfigsymbols.sh
+++ /dev/null
@@ -1,59 +0,0 @@
-#!/bin/sh
-# Find Kconfig variables used in source code but never defined in Kconfig
-# Copyright (C) 2007, Paolo 'Blaisorblade' Giarrusso <blaisorblade@xxxxxxxx>
-
-# Tested with dash.
-paths="$@"
-[ -z "$paths" ] && paths=.
-
-# Doing this once at the beginning saves a lot of time, on a cache-hot tree.
-Kconfigs="`find . -name 'Kconfig' -o -name 'Kconfig*[^~]'`"
-
-printf "File list \tundefined symbol used\n"
-find $paths -name '*.[chS]' -o -name 'Makefile' -o -name 'Makefile*[^~]'| while read i
-do
-	# Output the bare Kconfig variable and the filename; the _MODULE part at
-	# the end is not removed here (would need perl an not-hungry regexp for that).
-	sed -ne 's!^.*\<\(UML_\)\?CONFIG_\([0-9A-Za-z_]\+\).*!\2 '$i'!p' < $i
-done | \
-# Smart "sort|uniq" implemented in awk and tuned to collect the names of all
-# files which use a given symbol
-awk '{map[$1, count[$1]++] = $2; }
-END {
-	for (combIdx in map) {
-		split(combIdx, separate, SUBSEP);
-		# The value may have been removed.
-		if (! ( (separate[1], separate[2]) in map ) )
-			continue;
-		symb=separate[1];
-		printf "%s ", symb;
-		#Use gawk extension to delete the names vector
-		delete names;
-		#Portably delete the names vector
-		#split("", names);
-		for (i=0; i < count[symb]; i++) {
-			names[map[symb, i]] = 1;
-			# Unfortunately, we may still encounter symb, i in the
-			# outside iteration.
-			delete map[symb, i];
-		}
-		i=0;
-		for (name in names) {
-			if (i > 0)
-				printf ", %s", name;
-			else
-				printf "%s", name;
-			i++;
-		}
-		printf "\n";
-	}
-}' |
-while read symb files; do
-	# Remove the _MODULE suffix when checking the variable name. This should
-	# be done only on tristate symbols, actually, but Kconfig parsing is
-	# beyond the purpose of this script.
-	symb_bare=`echo $symb | sed -e 's/_MODULE//'`
-	if ! grep -q "\<$symb_bare\>" $Kconfigs; then
-		printf "$files: \t$symb\n"
-	fi
-done|sort
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/