Re: [PATCH v3 3/3] power: gpio-charger: do not use gpio value directly

[Doug Anderson]

Heiko,

On Tue, Sep 23, 2014 at 4:59 AM, Heiko Stuebner <heiko@xxxxxxxxx> wrote:
> From: Heiko Stuebner <heiko.stuebner@xxxxxx>
>
> Some gpio implementations return interesting values for gpio_get_value when
> the value is not 0 - as seen on a imx6sl board. Therefore do not use the
> value returned from gpio_get_value directly but simply check for 0 or not 0.
>
> Signed-off-by: Heiko Stuebner <heiko.stuebner@xxxxxx>
> ---
>  drivers/power/gpio-charger.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/power/gpio-charger.c b/drivers/power/gpio-charger.c
> index 22f084a..7d4eab2 100644
> --- a/drivers/power/gpio-charger.c
> +++ b/drivers/power/gpio-charger.c
> @@ -57,7 +57,7 @@ static int gpio_charger_get_property(struct power_supply *psy,
>
>         switch (psp) {
>         case POWER_SUPPLY_PROP_ONLINE:
> -               val->intval = gpio_get_value_cansleep(pdata->gpio);
> +               val->intval = !!gpio_get_value_cansleep(pdata->gpio);
>                 val->intval ^= pdata->gpio_active_low;

...so I guess the interface is that gpio_active_low must be exactly 1
or 0.  Oh, and that's actually defined in gpio-charger.h!  I should
have checked that before.

Reviewed-by: Doug Anderson <dianders@xxxxxxxxxxxx>
Tested-by: Doug Anderson <dianders@xxxxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/