[PATCH v4 3/3] power: gpio-charger: do not use gpio value directly

[Heiko Stuebner]

From: Heiko Stuebner <heiko.stuebner@xxxxxx>

Some gpio implementations return interesting values for gpio_get_value when
the value is not 0 - as seen on a imx6sl board. Therefore do not use the
value returned from gpio_get_value directly but simply check for 0 or not 0.

Signed-off-by: Heiko Stuebner <heiko.stuebner@xxxxxx>
Reviewed-by: Doug Anderson <dianders@xxxxxxxxxxxx>
Tested-by: Doug Anderson <dianders@xxxxxxxxxxxx>
---
 drivers/power/gpio-charger.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/power/gpio-charger.c b/drivers/power/gpio-charger.c
index 22f084a..7d4eab2 100644
--- a/drivers/power/gpio-charger.c
+++ b/drivers/power/gpio-charger.c
@@ -57,7 +57,7 @@ static int gpio_charger_get_property(struct power_supply *psy,
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_ONLINE:
-		val->intval = gpio_get_value_cansleep(pdata->gpio);
+		val->intval = !!gpio_get_value_cansleep(pdata->gpio);
 		val->intval ^= pdata->gpio_active_low;
 		break;
 	default:
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/