[PATCH 2/4] toshiba_acpi: Unify return codes prefix to from HCI/SCI to TOS
From: Azael Avalos
Date: Tue Sep 23 2014 - 20:24:54 EST
The return codes are split in between HCI/SCI prefixes,
but they are shared (used) by both interfaces, mixing
hci_read/write calls with SCI_* return codes, and
sci_read/write calls with HCI_* ones.
This patch changes the prefix of the return codes
definitions, dropping the HCI/SCI naming and instead
replacing it with TOS (for TOShiba).
Signed-off-by: Azael Avalos <coproscefalo@xxxxxxxxx>
---
drivers/platform/x86/toshiba_acpi.c | 143 ++++++++++++++++++------------------
1 file changed, 72 insertions(+), 71 deletions(-)
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index b7030dc..5b16d11 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -95,17 +95,18 @@ MODULE_LICENSE("GPL");
#define SCI_SET 0xf400
/* return codes */
-#define HCI_SUCCESS 0x0000
-#define HCI_FAILURE 0x1000
-#define HCI_NOT_SUPPORTED 0x8000
-#define HCI_EMPTY 0x8c00
-#define HCI_DATA_NOT_AVAILABLE 0x8d20
-#define HCI_NOT_INITIALIZED 0x8d50
-#define SCI_OPEN_CLOSE_OK 0x0044
-#define SCI_ALREADY_OPEN 0x8100
-#define SCI_NOT_OPENED 0x8200
-#define SCI_INPUT_DATA_ERROR 0x8300
-#define SCI_NOT_PRESENT 0x8600
+#define TOS_SUCCESS 0x0000
+#define TOS_OPEN_CLOSE_OK 0x0044
+#define TOS_FAILURE 0x1000
+#define TOS_NOT_SUPPORTED 0x8000
+#define TOS_ALREADY_OPEN 0x8100
+#define TOS_NOT_OPENED 0x8200
+#define TOS_INPUT_DATA_ERROR 0x8300
+#define TOS_WRITE_PROTECTED 0x8400
+#define TOS_NOT_PRESENT 0x8600
+#define TOS_FIFO_EMPTY 0x8c00
+#define TOS_DATA_NOT_AVAILABLE 0x8d20
+#define TOS_NOT_INITIALIZED 0x8d50
/* registers */
#define HCI_FAN 0x0004
@@ -321,7 +322,7 @@ static acpi_status hci_write1(struct toshiba_acpi_dev *dev, u32 reg,
u32 in[HCI_WORDS] = { HCI_SET, reg, in1, 0, 0, 0 };
u32 out[HCI_WORDS];
acpi_status status = tci_raw(dev, in, out);
- *result = (status == AE_OK) ? out[0] : HCI_FAILURE;
+ *result = (status == AE_OK) ? out[0] : TOS_FAILURE;
return status;
}
@@ -332,7 +333,7 @@ static acpi_status hci_read1(struct toshiba_acpi_dev *dev, u32 reg,
u32 out[HCI_WORDS];
acpi_status status = tci_raw(dev, in, out);
*out1 = out[2];
- *result = (status == AE_OK) ? out[0] : HCI_FAILURE;
+ *result = (status == AE_OK) ? out[0] : TOS_FAILURE;
return status;
}
@@ -342,7 +343,7 @@ static acpi_status hci_write2(struct toshiba_acpi_dev *dev, u32 reg,
u32 in[HCI_WORDS] = { HCI_SET, reg, in1, in2, 0, 0 };
u32 out[HCI_WORDS];
acpi_status status = tci_raw(dev, in, out);
- *result = (status == AE_OK) ? out[0] : HCI_FAILURE;
+ *result = (status == AE_OK) ? out[0] : TOS_FAILURE;
return status;
}
@@ -354,7 +355,7 @@ static acpi_status hci_read2(struct toshiba_acpi_dev *dev, u32 reg,
acpi_status status = tci_raw(dev, in, out);
*out1 = out[2];
*out2 = out[3];
- *result = (status == AE_OK) ? out[0] : HCI_FAILURE;
+ *result = (status == AE_OK) ? out[0] : TOS_FAILURE;
return status;
}
@@ -368,17 +369,17 @@ static int sci_open(struct toshiba_acpi_dev *dev)
acpi_status status;
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == HCI_FAILURE) {
+ if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
pr_err("ACPI call to open SCI failed\n");
return 0;
}
- if (out[0] == SCI_OPEN_CLOSE_OK) {
+ if (out[0] == TOS_OPEN_CLOSE_OK) {
return 1;
- } else if (out[0] == SCI_ALREADY_OPEN) {
+ } else if (out[0] == TOS_ALREADY_OPEN) {
pr_info("Toshiba SCI already opened\n");
return 1;
- } else if (out[0] == SCI_NOT_PRESENT) {
+ } else if (out[0] == TOS_NOT_PRESENT) {
pr_info("Toshiba SCI is not present\n");
}
@@ -392,16 +393,16 @@ static void sci_close(struct toshiba_acpi_dev *dev)
acpi_status status;
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == HCI_FAILURE) {
+ if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
pr_err("ACPI call to close SCI failed\n");
return;
}
- if (out[0] == SCI_OPEN_CLOSE_OK)
+ if (out[0] == TOS_OPEN_CLOSE_OK)
return;
- else if (out[0] == SCI_NOT_OPENED)
+ else if (out[0] == TOS_NOT_OPENED)
pr_info("Toshiba SCI not opened\n");
- else if (out[0] == SCI_NOT_PRESENT)
+ else if (out[0] == TOS_NOT_PRESENT)
pr_info("Toshiba SCI is not present\n");
}
@@ -412,7 +413,7 @@ static acpi_status sci_read(struct toshiba_acpi_dev *dev, u32 reg,
u32 out[HCI_WORDS];
acpi_status status = tci_raw(dev, in, out);
*out1 = out[2];
- *result = (ACPI_SUCCESS(status)) ? out[0] : HCI_FAILURE;
+ *result = (ACPI_SUCCESS(status)) ? out[0] : TOS_FAILURE;
return status;
}
@@ -422,7 +423,7 @@ static acpi_status sci_write(struct toshiba_acpi_dev *dev, u32 reg,
u32 in[HCI_WORDS] = { SCI_SET, reg, in1, 0, 0, 0 };
u32 out[HCI_WORDS];
acpi_status status = tci_raw(dev, in, out);
- *result = (ACPI_SUCCESS(status)) ? out[0] : HCI_FAILURE;
+ *result = (ACPI_SUCCESS(status)) ? out[0] : TOS_FAILURE;
return status;
}
@@ -438,10 +439,10 @@ static int toshiba_illumination_available(struct toshiba_acpi_dev *dev)
status = tci_raw(dev, in, out);
sci_close(dev);
- if (ACPI_FAILURE(status) || out[0] == HCI_FAILURE) {
+ if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
pr_err("ACPI call to query Illumination support failed\n");
return 0;
- } else if (out[0] == HCI_NOT_SUPPORTED) {
+ } else if (out[0] == TOS_NOT_SUPPORTED) {
pr_info("Illumination device not available\n");
return 0;
}
@@ -468,7 +469,7 @@ static void toshiba_illumination_set(struct led_classdev *cdev,
if (ACPI_FAILURE(status)) {
pr_err("ACPI call for illumination failed\n");
return;
- } else if (result == HCI_NOT_SUPPORTED) {
+ } else if (result == TOS_NOT_SUPPORTED) {
pr_info("Illumination not supported\n");
return;
}
@@ -488,10 +489,10 @@ static enum led_brightness toshiba_illumination_get(struct led_classdev *cdev)
/* Check the illumination */
status = sci_read(dev, SCI_ILLUMINATION, &state, &result);
sci_close(dev);
- if (ACPI_FAILURE(status) || result == SCI_INPUT_DATA_ERROR) {
+ if (ACPI_FAILURE(status) || result == TOS_INPUT_DATA_ERROR) {
pr_err("ACPI call for illumination failed\n");
return LED_OFF;
- } else if (result == HCI_NOT_SUPPORTED) {
+ } else if (result == TOS_NOT_SUPPORTED) {
pr_info("Illumination not supported\n");
return LED_OFF;
}
@@ -511,10 +512,10 @@ static int toshiba_kbd_illum_available(struct toshiba_acpi_dev *dev)
status = tci_raw(dev, in, out);
sci_close(dev);
- if (ACPI_FAILURE(status) || out[0] == SCI_INPUT_DATA_ERROR) {
+ if (ACPI_FAILURE(status) || out[0] == TOS_INPUT_DATA_ERROR) {
pr_err("ACPI call to query kbd illumination support failed\n");
return 0;
- } else if (out[0] == HCI_NOT_SUPPORTED) {
+ } else if (out[0] == TOS_NOT_SUPPORTED) {
pr_info("Keyboard illumination not available\n");
return 0;
}
@@ -546,10 +547,10 @@ static int toshiba_kbd_illum_status_set(struct toshiba_acpi_dev *dev, u32 time)
status = sci_write(dev, SCI_KBD_ILLUM_STATUS, time, &result);
sci_close(dev);
- if (ACPI_FAILURE(status) || result == SCI_INPUT_DATA_ERROR) {
+ if (ACPI_FAILURE(status) || result == TOS_INPUT_DATA_ERROR) {
pr_err("ACPI call to set KBD backlight status failed\n");
return -EIO;
- } else if (result == HCI_NOT_SUPPORTED) {
+ } else if (result == TOS_NOT_SUPPORTED) {
pr_info("Keyboard backlight status not supported\n");
return -ENODEV;
}
@@ -567,10 +568,10 @@ static int toshiba_kbd_illum_status_get(struct toshiba_acpi_dev *dev, u32 *time)
status = sci_read(dev, SCI_KBD_ILLUM_STATUS, time, &result);
sci_close(dev);
- if (ACPI_FAILURE(status) || result == SCI_INPUT_DATA_ERROR) {
+ if (ACPI_FAILURE(status) || result == TOS_INPUT_DATA_ERROR) {
pr_err("ACPI call to get KBD backlight status failed\n");
return -EIO;
- } else if (result == HCI_NOT_SUPPORTED) {
+ } else if (result == TOS_NOT_SUPPORTED) {
pr_info("Keyboard backlight status not supported\n");
return -ENODEV;
}
@@ -587,10 +588,10 @@ static enum led_brightness toshiba_kbd_backlight_get(struct led_classdev *cdev)
/* Check the keyboard backlight state */
status = hci_read1(dev, HCI_KBD_ILLUMINATION, &state, &result);
- if (ACPI_FAILURE(status) || result == SCI_INPUT_DATA_ERROR) {
+ if (ACPI_FAILURE(status) || result == TOS_INPUT_DATA_ERROR) {
pr_err("ACPI call to get the keyboard backlight failed\n");
return LED_OFF;
- } else if (result == HCI_NOT_SUPPORTED) {
+ } else if (result == TOS_NOT_SUPPORTED) {
pr_info("Keyboard backlight not supported\n");
return LED_OFF;
}
@@ -609,10 +610,10 @@ static void toshiba_kbd_backlight_set(struct led_classdev *cdev,
/* Set the keyboard backlight state */
state = brightness ? 1 : 0;
status = hci_write1(dev, HCI_KBD_ILLUMINATION, state, &result);
- if (ACPI_FAILURE(status) || result == SCI_INPUT_DATA_ERROR) {
+ if (ACPI_FAILURE(status) || result == TOS_INPUT_DATA_ERROR) {
pr_err("ACPI call to set KBD Illumination mode failed\n");
return;
- } else if (result == HCI_NOT_SUPPORTED) {
+ } else if (result == TOS_NOT_SUPPORTED) {
pr_info("Keyboard backlight not supported\n");
return;
}
@@ -632,7 +633,7 @@ static int toshiba_touchpad_set(struct toshiba_acpi_dev *dev, u32 state)
if (ACPI_FAILURE(status)) {
pr_err("ACPI call to set the touchpad failed\n");
return -EIO;
- } else if (result == HCI_NOT_SUPPORTED) {
+ } else if (result == TOS_NOT_SUPPORTED) {
return -ENODEV;
}
@@ -652,7 +653,7 @@ static int toshiba_touchpad_get(struct toshiba_acpi_dev *dev, u32 *state)
if (ACPI_FAILURE(status)) {
pr_err("ACPI call to query the touchpad failed\n");
return -EIO;
- } else if (result == HCI_NOT_SUPPORTED) {
+ } else if (result == TOS_NOT_SUPPORTED) {
return -ENODEV;
}
@@ -667,7 +668,7 @@ static int toshiba_eco_mode_available(struct toshiba_acpi_dev *dev)
u32 out[HCI_WORDS];
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == SCI_INPUT_DATA_ERROR) {
+ if (ACPI_FAILURE(status) || out[0] == TOS_INPUT_DATA_ERROR) {
pr_info("ACPI call to get ECO led failed\n");
return 0;
}
@@ -684,7 +685,7 @@ static enum led_brightness toshiba_eco_mode_get_status(struct led_classdev *cdev
acpi_status status;
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == SCI_INPUT_DATA_ERROR) {
+ if (ACPI_FAILURE(status) || out[0] == TOS_INPUT_DATA_ERROR) {
pr_err("ACPI call to get ECO led failed\n");
return LED_OFF;
}
@@ -704,7 +705,7 @@ static void toshiba_eco_mode_set_status(struct led_classdev *cdev,
/* Switch the Eco Mode led on/off */
in[2] = (brightness) ? 1 : 0;
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == SCI_INPUT_DATA_ERROR) {
+ if (ACPI_FAILURE(status) || out[0] == TOS_INPUT_DATA_ERROR) {
pr_err("ACPI call to set ECO led failed\n");
return;
}
@@ -721,14 +722,14 @@ static int toshiba_accelerometer_supported(struct toshiba_acpi_dev *dev)
* this call also serves as initialization
*/
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == SCI_INPUT_DATA_ERROR) {
+ if (ACPI_FAILURE(status) || out[0] == TOS_INPUT_DATA_ERROR) {
pr_err("ACPI call to query the accelerometer failed\n");
return -EIO;
- } else if (out[0] == HCI_DATA_NOT_AVAILABLE ||
- out[0] == HCI_NOT_INITIALIZED) {
+ } else if (out[0] == TOS_DATA_NOT_AVAILABLE ||
+ out[0] == TOS_NOT_INITIALIZED) {
pr_err("Accelerometer not initialized\n");
return -EIO;
- } else if (out[0] == HCI_NOT_SUPPORTED) {
+ } else if (out[0] == TOS_NOT_SUPPORTED) {
pr_info("Accelerometer not supported\n");
return -ENODEV;
}
@@ -745,7 +746,7 @@ static int toshiba_accelerometer_get(struct toshiba_acpi_dev *dev,
/* Check the Accelerometer status */
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == SCI_INPUT_DATA_ERROR) {
+ if (ACPI_FAILURE(status) || out[0] == TOS_INPUT_DATA_ERROR) {
pr_err("ACPI call to query the accelerometer failed\n");
return -EIO;
}
@@ -766,7 +767,7 @@ static u32 hci_get_bt_present(struct toshiba_acpi_dev *dev, bool *present)
value = 0;
value2 = 0;
hci_read2(dev, HCI_WIRELESS, &value, &value2, &hci_result);
- if (hci_result == HCI_SUCCESS)
+ if (hci_result == TOS_SUCCESS)
*present = (value & HCI_WIRELESS_BT_PRESENT) ? true : false;
return hci_result;
@@ -796,7 +797,7 @@ static int bt_rfkill_set_block(void *data, bool blocked)
value = (blocked == false);
mutex_lock(&dev->mutex);
- if (hci_get_radio_state(dev, &radio_state) != HCI_SUCCESS) {
+ if (hci_get_radio_state(dev, &radio_state) != TOS_SUCCESS) {
err = -EIO;
goto out;
}
@@ -809,7 +810,7 @@ static int bt_rfkill_set_block(void *data, bool blocked)
hci_write2(dev, HCI_WIRELESS, value, HCI_WIRELESS_BT_POWER, &result1);
hci_write2(dev, HCI_WIRELESS, value, HCI_WIRELESS_BT_ATTACH, &result2);
- if (result1 != HCI_SUCCESS || result2 != HCI_SUCCESS)
+ if (result1 != TOS_SUCCESS || result2 != TOS_SUCCESS)
err = -EIO;
else
err = 0;
@@ -828,7 +829,7 @@ static void bt_rfkill_poll(struct rfkill *rfkill, void *data)
mutex_lock(&dev->mutex);
hci_result = hci_get_radio_state(dev, &value);
- if (hci_result != HCI_SUCCESS) {
+ if (hci_result != TOS_SUCCESS) {
/* Can't do anything useful */
mutex_unlock(&dev->mutex);
return;
@@ -854,7 +855,7 @@ static int get_tr_backlight_status(struct toshiba_acpi_dev *dev, bool *enabled)
hci_read1(dev, HCI_TR_BACKLIGHT, &status, &hci_result);
*enabled = !status;
- return hci_result == HCI_SUCCESS ? 0 : -EIO;
+ return hci_result == TOS_SUCCESS ? 0 : -EIO;
}
static int set_tr_backlight_status(struct toshiba_acpi_dev *dev, bool enable)
@@ -863,7 +864,7 @@ static int set_tr_backlight_status(struct toshiba_acpi_dev *dev, bool enable)
u32 value = !enable;
hci_write1(dev, HCI_TR_BACKLIGHT, value, &hci_result);
- return hci_result == HCI_SUCCESS ? 0 : -EIO;
+ return hci_result == TOS_SUCCESS ? 0 : -EIO;
}
static struct proc_dir_entry *toshiba_proc_dir /*= 0*/ ;
@@ -885,7 +886,7 @@ static int __get_lcd_brightness(struct toshiba_acpi_dev *dev)
}
hci_read1(dev, HCI_LCD_BRIGHTNESS, &value, &hci_result);
- if (hci_result == HCI_SUCCESS)
+ if (hci_result == TOS_SUCCESS)
return brightness + (value >> HCI_LCD_BRIGHTNESS_SHIFT);
return -EIO;
@@ -940,18 +941,18 @@ static int set_lcd_brightness(struct toshiba_acpi_dev *dev, int value)
in[2] = value << HCI_LCD_BRIGHTNESS_SHIFT;
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == HCI_FAILURE) {
+ if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
pr_err("ACPI call to set brightness failed");
return -EIO;
}
/* Extra check for "incomplete" backlight method, where the AML code
- * doesn't check for HCI_SET or HCI_GET and returns HCI_SUCCESS,
+ * doesn't check for HCI_SET or HCI_GET and returns TOS_SUCCESS,
* the actual brightness, and in some cases the max brightness.
*/
if (out[2] > 0 || out[3] == 0xE000)
return -ENODEV;
- return out[0] == HCI_SUCCESS ? 0 : -EIO;
+ return out[0] == TOS_SUCCESS ? 0 : -EIO;
}
static int set_lcd_status(struct backlight_device *bd)
@@ -1000,7 +1001,7 @@ static int get_video_status(struct toshiba_acpi_dev *dev, u32 *status)
u32 hci_result;
hci_read1(dev, HCI_VIDEO_OUT, status, &hci_result);
- return hci_result == HCI_SUCCESS ? 0 : -EIO;
+ return hci_result == TOS_SUCCESS ? 0 : -EIO;
}
static int video_proc_show(struct seq_file *m, void *v)
@@ -1104,7 +1105,7 @@ static int get_fan_status(struct toshiba_acpi_dev *dev, u32 *status)
u32 hci_result;
hci_read1(dev, HCI_FAN, status, &hci_result);
- return hci_result == HCI_SUCCESS ? 0 : -EIO;
+ return hci_result == TOS_SUCCESS ? 0 : -EIO;
}
static int fan_proc_show(struct seq_file *m, void *v)
@@ -1144,7 +1145,7 @@ static ssize_t fan_proc_write(struct file *file, const char __user *buf,
if (sscanf(cmd, " force_on : %i", &value) == 1 &&
value >= 0 && value <= 1) {
hci_write1(dev, HCI_FAN, value, &hci_result);
- if (hci_result != HCI_SUCCESS)
+ if (hci_result != TOS_SUCCESS)
return -EIO;
else
dev->force_fan = value;
@@ -1172,12 +1173,12 @@ static int keys_proc_show(struct seq_file *m, void *v)
if (!dev->key_event_valid && dev->system_event_supported) {
hci_read1(dev, HCI_SYSTEM_EVENT, &value, &hci_result);
- if (hci_result == HCI_SUCCESS) {
+ if (hci_result == TOS_SUCCESS) {
dev->key_event_valid = 1;
dev->last_key_event = value;
- } else if (hci_result == HCI_EMPTY) {
+ } else if (hci_result == TOS_FIFO_EMPTY) {
/* better luck next time */
- } else if (hci_result == HCI_NOT_SUPPORTED) {
+ } else if (hci_result == TOS_NOT_SUPPORTED) {
/* This is a workaround for an unresolved issue on
* some machines where system events sporadically
* become disabled. */
@@ -1676,7 +1677,7 @@ static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev)
dev->info_supported = 1;
else {
hci_write1(dev, HCI_SYSTEM_EVENT, 1, &hci_result);
- if (hci_result == HCI_SUCCESS)
+ if (hci_result == TOS_SUCCESS)
dev->system_event_supported = 1;
}
@@ -1856,7 +1857,7 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
goto error;
/* Register rfkill switch for Bluetooth */
- if (hci_get_bt_present(dev, &bt_present) == HCI_SUCCESS && bt_present) {
+ if (hci_get_bt_present(dev, &bt_present) == TOS_SUCCESS && bt_present) {
dev->bt_rfk = rfkill_alloc("Toshiba Bluetooth",
&acpi_dev->dev,
RFKILL_TYPE_BLUETOOTH,
@@ -1961,10 +1962,10 @@ static void toshiba_acpi_notify(struct acpi_device *acpi_dev, u32 event)
do {
hci_read1(dev, HCI_SYSTEM_EVENT, &value, &hci_result);
switch (hci_result) {
- case HCI_SUCCESS:
+ case TOS_SUCCESS:
toshiba_acpi_report_hotkey(dev, (int)value);
break;
- case HCI_NOT_SUPPORTED:
+ case TOS_NOT_SUPPORTED:
/*
* This is a workaround for an unresolved
* issue on some machines where system events
@@ -1978,7 +1979,7 @@ static void toshiba_acpi_notify(struct acpi_device *acpi_dev, u32 event)
retries--;
break;
}
- } while (retries && hci_result != HCI_EMPTY);
+ } while (retries && hci_result != TOS_FIFO_EMPTY);
}
}
--
2.0.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/