Re: [-next, 1/2] Input: synaptics-rmi4 - add support for F55 sensor tuning

From: Guenter Roeck
Date: Mon Oct 17 2016 - 17:30:23 EST

On Fri, Sep 30, 2016 at 08:22:47PM -0700, Guenter Roeck wrote:
> Sensor tuning support is needed to determine the number of enabled
> tx and rx electrodes for use in F54 functions.
>
> The number of enabled electrodes is not identical to the total number
> of electrodes as reported with F55:Query0 and F55:Query1. It has to be
> calculated by analyzing F55:Ctrl1 (sensor receiver assignment) and
> F55:Ctrl2 (sensor transmitter assignment).
>
> Support for additional sensor tuning functions may be added later.
>
> Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>

Ping ... any comments on this patch and on
https://patchwork.kernel.org/patch/9359061/ ?

Both patches now apply to mainline.

Thanks,
Guenter

> ---
> This patch applies to next-20160930.
>
> drivers/input/rmi4/Kconfig | 9 +++
> drivers/input/rmi4/Makefile | 1 +
> drivers/input/rmi4/rmi_bus.c | 3 +
> drivers/input/rmi4/rmi_driver.h | 1 +
> drivers/input/rmi4/rmi_f55.c | 127 ++++++++++++++++++++++++++++++++++++++++
> 5 files changed, 141 insertions(+)
> create mode 100644 drivers/input/rmi4/rmi_f55.c
>
> diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig
> index 4c8a55857e00..11ede43c9936 100644
> --- a/drivers/input/rmi4/Kconfig
> +++ b/drivers/input/rmi4/Kconfig
> @@ -72,3 +72,12 @@ config RMI4_F54
>
> Function 54 provides access to various diagnostic features in certain
> RMI4 touch sensors.
> +
> +config RMI4_F55
> + bool "RMI4 Function 55 (Sensor tuning)"
> + depends on RMI4_CORE
> + help
> + Say Y here if you want to add support for RMI4 function 55
> +
> + Function 55 provides access to the RMI4 touch sensor tuning
> + mechanism.
> diff --git a/drivers/input/rmi4/Makefile b/drivers/input/rmi4/Makefile
> index 0bafc8502c4b..96f8e0c21e3b 100644
> --- a/drivers/input/rmi4/Makefile
> +++ b/drivers/input/rmi4/Makefile
> @@ -8,6 +8,7 @@ rmi_core-$(CONFIG_RMI4_F11) += rmi_f11.o
> rmi_core-$(CONFIG_RMI4_F12) += rmi_f12.o
> rmi_core-$(CONFIG_RMI4_F30) += rmi_f30.o
> rmi_core-$(CONFIG_RMI4_F54) += rmi_f54.o
> +rmi_core-$(CONFIG_RMI4_F55) += rmi_f55.o
>
> # Transports
> obj-$(CONFIG_RMI4_I2C) += rmi_i2c.o
> diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c
> index ef8c747c35e7..82b7d4960858 100644
> --- a/drivers/input/rmi4/rmi_bus.c
> +++ b/drivers/input/rmi4/rmi_bus.c
> @@ -314,6 +314,9 @@ static struct rmi_function_handler *fn_handlers[] = {
> #ifdef CONFIG_RMI4_F54
> &rmi_f54_handler,
> #endif
> +#ifdef CONFIG_RMI4_F55
> + &rmi_f55_handler,
> +#endif
> };
>
> static void __rmi_unregister_function_handlers(int start_idx)
> diff --git a/drivers/input/rmi4/rmi_driver.h b/drivers/input/rmi4/rmi_driver.h
> index 8dfbebe9bf86..a65cf70f61e2 100644
> --- a/drivers/input/rmi4/rmi_driver.h
> +++ b/drivers/input/rmi4/rmi_driver.h
> @@ -103,4 +103,5 @@ extern struct rmi_function_handler rmi_f11_handler;
> extern struct rmi_function_handler rmi_f12_handler;
> extern struct rmi_function_handler rmi_f30_handler;
> extern struct rmi_function_handler rmi_f54_handler;
> +extern struct rmi_function_handler rmi_f55_handler;
> #endif
> diff --git a/drivers/input/rmi4/rmi_f55.c b/drivers/input/rmi4/rmi_f55.c
> new file mode 100644
> index 000000000000..268fa904205a
> --- /dev/null
> +++ b/drivers/input/rmi4/rmi_f55.c
> @@ -0,0 +1,127 @@
> +/*
> + * Copyright (c) 2012-2015 Synaptics Incorporated
> + * Copyright (C) 2016 Zodiac Inflight Innovations
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/delay.h>
> +#include <linux/i2c.h>
> +#include <linux/input.h>
> +#include <linux/kernel.h>
> +#include <linux/rmi.h>
> +#include <linux/slab.h>
> +#include "rmi_driver.h"
> +
> +#define F55_NAME "rmi4_f55"
> +
> +/* F55 data offsets */
> +#define F55_NUM_RX_OFFSET 0
> +#define F55_NUM_TX_OFFSET 1
> +#define F55_PHYS_CHAR_OFFSET 2
> +
> +/* Fixed sizes of reports */
> +#define F55_QUERY_LEN 17
> +
> +/* F55 capabilities */
> +#define F55_CAP_SENSOR_ASSIGN BIT(0)
> +
> +struct f55_data {
> + struct rmi_function *fn;
> +
> + u8 qry[F55_QUERY_LEN];
> + u8 num_rx_electrodes;
> + u8 cfg_num_rx_electrodes;
> + u8 num_tx_electrodes;
> + u8 cfg_num_tx_electrodes;
> +};
> +
> +static int rmi_f55_detect(struct rmi_function *fn)
> +{
> + struct f55_data *f55;
> + int error;
> +
> + f55 = dev_get_drvdata(&fn->dev);
> +
> + error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr,
> + &f55->qry, sizeof(f55->qry));
> + if (error) {
> + dev_err(&fn->dev, "%s: Failed to query F55 properties\n",
> + __func__);
> + return error;
> + }
> +
> + f55->num_rx_electrodes = f55->qry[F55_NUM_RX_OFFSET];
> + f55->num_tx_electrodes = f55->qry[F55_NUM_TX_OFFSET];
> +
> + f55->cfg_num_rx_electrodes = f55->num_rx_electrodes;
> + f55->cfg_num_tx_electrodes = f55->num_rx_electrodes;
> +
> + if (f55->qry[F55_PHYS_CHAR_OFFSET] & F55_CAP_SENSOR_ASSIGN) {
> + int i, total;
> + u8 buf[256];
> +
> + /*
> + * Calculate the number of enabled receive and transmit
> + * electrodes by reading F55:Ctrl1 (sensor receiver assignment)
> + * and F55:Ctrl2 (sensor transmitter assignment). The number of
> + * enabled electrodes is the sum of all field entries with a
> + * value other than 0xff.
> + */
> + error = rmi_read_block(fn->rmi_dev,
> + fn->fd.control_base_addr + 1,
> + buf, f55->num_rx_electrodes);
> + if (!error) {
> + total = 0;
> + for (i = 0; i < f55->num_rx_electrodes; i++) {
> + if (buf[i] != 0xff)
> + total++;
> + }
> + f55->cfg_num_rx_electrodes = total;
> + }
> +
> + error = rmi_read_block(fn->rmi_dev,
> + fn->fd.control_base_addr + 2,
> + buf, f55->num_tx_electrodes);
> + if (!error) {
> + total = 0;
> + for (i = 0; i < f55->num_tx_electrodes; i++) {
> + if (buf[i] != 0xff)
> + total++;
> + }
> + f55->cfg_num_tx_electrodes = total;
> + }
> + }
> +
> + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "F55 num_rx_electrodes: %d (raw %d)\n",
> + f55->cfg_num_rx_electrodes, f55->num_rx_electrodes);
> + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "F55 num_tx_electrodes: %d (raw %d)\n",
> + f55->cfg_num_tx_electrodes, f55->num_tx_electrodes);
> +
> + return 0;
> +}
> +
> +static int rmi_f55_probe(struct rmi_function *fn)
> +{
> + struct f55_data *f55;
> +
> + f55 = devm_kzalloc(&fn->dev, sizeof(struct f55_data), GFP_KERNEL);
> + if (!f55)
> + return -ENOMEM;
> +
> + f55->fn = fn;
> + dev_set_drvdata(&fn->dev, f55);
> +
> + return rmi_f55_detect(fn);
> +}
> +
> +struct rmi_function_handler rmi_f55_handler = {
> + .driver = {
> + .name = F55_NAME,
> + },
> + .func = 0x55,
> + .probe = rmi_f55_probe,
> +};