Re: [PATCH 1/5] dt-bindings: arm: atmel: add bindings for PIT64B

[Nicolas.Ferre]

On 14/03/2019 at 17:26, Claudiu Beznea - M18063 wrote:
> From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
> 
> Add device tree bindings for PIT64B timer.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>

Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>

> ---
>   Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 7 +++++++
>   1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> index 14f319f694b7..c7b7ead7966b 100644
> --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> @@ -10,6 +10,13 @@ PIT Timer required properties:
>   - interrupts: Should contain interrupt for the PIT which is the IRQ line
>     shared across all System Controller members.
>   
> +PIT64B Timer required properties:
> +- compatible: Should be "microchip,sam9x60-pit64b"
> +- reg: Should contain registers location and length
> +- clock-frequency: Should contain PIT64B timer frequency
> +- interrupts: Should contain interrupt for PIT64B timer
> +- clocks: Should contain the available clock sources for PIT64B timer.
> +
>   System Timer (ST) required properties:
>   - compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
>   - reg: Should contain registers location and length
> 


-- 
Nicolas Ferre