Re: [PATCH V7 2/6] drm/mediatek: move the setting of fixed divider

[CK Hu]

Hi, Wangyan:

On Wed, 2019-03-27 at 17:19 +0800, wangyan wang wrote:
> From: chunhui dai <chunhui.dai@xxxxxxxxxxxx>
> 
> move the setting of fixed divider from enable/disable
> to the function of setting rate.
> 
> the patch is for hdmi pll divider, the divder should
> be configured before clock calculation to ensure the
> clock is right.

I think this patch is introduced by the patch "drm/mediatek: recalculate
hdmi phy clock of MT2701 by querying hardware", so I would like to
squash this patch into that patch.

Regards,
CK

> 
> Signed-off-by: chunhui dai <chunhui.dai@xxxxxxxxxxxx>
> Signed-off-by: wangyan wang <wangyan.wang@xxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c | 5 +----
>  1 file changed, 1 insertion(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
> index 9dcf9c2ff37a..6f29e87eefd0 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
> +++ b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
> @@ -79,7 +79,6 @@ static int mtk_hdmi_pll_prepare(struct clk_hw *hw)
>  	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
>  	usleep_range(80, 100);
>  	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
> -	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
>  	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
>  	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
>  	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
> @@ -94,7 +93,6 @@ static void mtk_hdmi_pll_unprepare(struct clk_hw *hw)
>  	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
>  	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
>  	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
> -	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
>  	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
>  	usleep_range(80, 100);
>  	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
> @@ -123,6 +121,7 @@ static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
>  
>  	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_PREDIV_MASK);
>  	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
>  	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_IC),
>  			  RG_HTPLL_IC_MASK);
>  	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_IR),
> @@ -207,7 +206,6 @@ static void mtk_hdmi_phy_enable_tmds(struct mtk_hdmi_phy *hdmi_phy)
>  	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
>  	usleep_range(80, 100);
>  	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
> -	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
>  	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
>  	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
>  	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
> @@ -219,7 +217,6 @@ static void mtk_hdmi_phy_disable_tmds(struct mtk_hdmi_phy *hdmi_phy)
>  	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
>  	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
>  	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
> -	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
>  	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
>  	usleep_range(80, 100);
>  	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);