[PATCH v2 1/2] drm/bridge/synopsys: dw-hdmi: Add an option to suppress loading CEC driver

[Jernej Skrabec]

DW HDMI controller on some Allwinner SoCs has support for CEC, but due
to additional logic put between CEC controller and pins, it doesn't work
correctly, at least not with a lot of instrusive changes. Fortunately,
it's still possible to bitbang protocol.

For such cases, add a platform option to suppress loading CEC driver. If
DW HDMI CEC driver would be loaded, it wouldn't work anyway and would only
cause a confusion with multiple /dev entries.

Reviewed-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 2 +-
 include/drm/bridge/dw_hdmi.h              | 2 ++
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index db761329a1e3..d2b0aa8d964c 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2660,7 +2660,7 @@ __dw_hdmi_probe(struct platform_device *pdev,
 		hdmi->audio = platform_device_register_full(&pdevinfo);
 	}
 
-	if (config0 & HDMI_CONFIG0_CEC) {
+	if (!plat_data->disable_cec && (config0 & HDMI_CONFIG0_CEC)) {
 		cec.hdmi = hdmi;
 		cec.ops = &dw_hdmi_cec_ops;
 		cec.irq = irq;
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index 66e70770cce5..c03bea3a1a36 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -144,6 +144,8 @@ struct dw_hdmi_plat_data {
 	int (*configure_phy)(struct dw_hdmi *hdmi,
 			     const struct dw_hdmi_plat_data *pdata,
 			     unsigned long mpixelclock);
+
+	unsigned int disable_cec : 1;
 };
 
 struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
-- 
2.21.0