Re: [PATCH v2 00/10]
From: Alexandre Belloni
Date: Tue Apr 02 2019 - 08:45:43 EST
Please disregard that series as this doesn't include the proper patches.
On 02/04/2019 14:40:06+0200, Alexandre Belloni wrote:
> This series add support for the sam9x60 clocks handled by the PMC.
>
> The first four patches are preparatory patches to handle register layout
> and offset differences. Then, a driver for the new interface for PLLs is
> added and the final patch is the driver for the sam9x60 PMC.
>
> changes in v2:
> - rebased on v5.1-rc1
> - changed the PLL_ACR handling to conform to the datasheet errata
>
> Alexandre Belloni (7):
> clk: at91: allow configuring peripheral PCR layout
> clk: at91: allow configuring generated PCR layout
> clk: at91: usb: Add sam9x60 support
> clk: at91: master: Add sam9x60 support
> clk: at91: add sam9x60 PLL driver
> dt-bindings: clk: at91: add bindings for SAM9X60 pmc
> clk: at91: add sam9x60 pmc driver
>
> Claudiu Beznea (3):
> clk: at91: sckc: add support to specify registers bit offsets
> clk: at91: sckc: add support for SAM9X60
> dt-bindings: clk: at91: add bindings for SAM9X60's slow clock
> controller
>
> .../devicetree/bindings/clock/at91-clock.txt | 6 +-
> drivers/clk/at91/Makefile | 2 +
> drivers/clk/at91/at91sam9x5.c | 9 +
> drivers/clk/at91/clk-generated.c | 48 +--
> drivers/clk/at91/clk-master.c | 8 +-
> drivers/clk/at91/clk-peripheral.c | 46 +--
> drivers/clk/at91/clk-sam9x60-pll.c | 330 ++++++++++++++++++
> drivers/clk/at91/clk-usb.c | 33 +-
> drivers/clk/at91/dt-compat.c | 12 +-
> drivers/clk/at91/pmc.h | 23 ++
> drivers/clk/at91/sam9x60.c | 307 ++++++++++++++++
> drivers/clk/at91/sama5d2.c | 10 +
> drivers/clk/at91/sama5d4.c | 8 +
> drivers/clk/at91/sckc.c | 142 ++++++--
> include/linux/clk/at91_pmc.h | 12 +-
> 15 files changed, 895 insertions(+), 101 deletions(-)
> create mode 100644 drivers/clk/at91/clk-sam9x60-pll.c
> create mode 100644 drivers/clk/at91/sam9x60.c
>
> --
> 2.20.1
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com