Re: [PATCH v2 3/3] DRM: Add KMS driver for the Ingenic JZ47xx SoCs

[Paul Cercueil]

Hi Sam,

Le sam. 16 mars 2019 à 22:59, Sam Ravnborg <sam@xxxxxxxxxxxx> a écrit 
:
> Hi Paul.
>
> Thanks for the v2 submission.
>
> Did you analyze the possibility to utilize 
> drm_simple_display_pipe_init()
> and the related infrastructure?
> If this fits it should simplify the driver.
> If it does not fit please let us know why.
> As this is a one crtc / one connector / one panel the drm_simple_*
> infrastructure is supposed to be a good fit.
>
> Some smaller comments in the following.
> Most are suggestion, do not follow these blindly.
>
> 	Sam
>
> >  Add a KMS driver for the Ingenic JZ47xx family of SoCs.
> >  This driver is meant to replace the aging jz4740-fb driver.
> >
> >  Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> >  Tested-by: Artur Rojek <contact@xxxxxxxxxxxxxx>
>
> >  +struct ingenic_drm {
> >  +	struct device *dev;
> >  +	void __iomem *base;
> >  +	struct regmap *map;
> >  +	struct clk *lcd_clk, *pix_clk;
> >  +
> >  +	u32 lcd_mode;
> >  +
> >  +	struct ingenic_dma_hwdesc *framedesc;
>
> Consider the name "dma_hwdesc" for this.
> The struct is named so, which give a good indication
> this is a more descriptive name.
>
> That said, the current solution looks much cleaner than the
> previous one.
>
> >  +	dma_addr_t framedesc_phys;
> Likewise.
>
>
> >  +
> >  +	struct drm_device *drm;
> If drm is embedded you can use devm_drm_dev_init()
> recently added to drm-misc.
>
> See the very nice example in drivers/gu/drm/drm_drv.c
> (only in drm-misc-next for now)

If I have a request for deferred probe after devm_drm_dev_init(),
I get a kernel oops in drm_mode_config_cleanup()...

> >  +	struct drm_plane primary;
> >  +	struct drm_crtc crtc;
> >  +	struct drm_encoder encoder;
> >  +};
> >  +
> >  +
> >  +static int ingenic_drm_probe(struct platform_device *pdev)
> >  +{
> >  +	const struct jz_soc_info *soc_info;
> >  +	struct device *dev = &pdev->dev;
> >  +	struct ingenic_drm *priv;
> >  +	struct clk *parent_clk;
> >  +	struct drm_bridge *bridge;
> >  +	struct drm_panel *panel;
> >  +	struct drm_device *drm;
> >  +	struct resource *mem;
> >  +	void __iomem *base;
> >  +	long parent_rate;
> >  +	int ret, irq;
> >  +
> >  +	soc_info = device_get_match_data(dev);
> Everyone else uses of_device_... here. You should most
> likely do the same.
>
> >  +	if (!soc_info)
> >  +		return -EINVAL;
> Also, consider to print an error here.
>
> >  +
> >  +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> >  +	if (!priv)
> >  +		return -ENOMEM;
> Use of devm_kzalloc() here is not good. See driver example in 
> drm_drv.c
>
> >  +
> >  +	priv->dev = dev;
> >  +
> >  +	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >  +	priv->base = base = devm_ioremap_resource(dev, mem);
> >  +	if (IS_ERR(base))
> >  +		return PTR_ERR(base);
> >  +
> >  +	irq = platform_get_irq(pdev, 0);
> >  +	if (irq < 0) {
> >  +		dev_err(dev, "Failed to get platform irq\n");
> >  +		return -ENOENT;
> >  +	}
> >  +
> >  +	priv->map = devm_regmap_init_mmio(dev, base,
> >  +					  &ingenic_drm_regmap_config);
> >  +	if (IS_ERR(priv->map)) {
> >  +		dev_err(dev, "Failed to create regmap\n");
> >  +		return PTR_ERR(priv->map);
> >  +	}
> >  +
> >  +	if (soc_info->needs_dev_clk) {
> >  +		priv->lcd_clk = devm_clk_get(dev, "lcd");
> >  +		if (IS_ERR(priv->lcd_clk)) {
> >  +			dev_err(dev, "Failed to get lcd clock\n");
> >  +			return PTR_ERR(priv->lcd_clk);
> >  +		}
> >  +	}
> >  +
> >  +	priv->pix_clk = devm_clk_get(dev, "lcd_pclk");
> >  +	if (IS_ERR(priv->pix_clk)) {
> >  +		dev_err(dev, "Failed to get pixel clock\n");
> >  +		return PTR_ERR(priv->pix_clk);
> >  +	}
> >  +
> >  +	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &panel, 
> > &bridge);
> >  +	if (ret) {
> >  +		if (ret != -EPROBE_DEFER)
> >  +			dev_err(dev, "Failed to get panel handle\n");
> >  +		return ret;
> >  +	}
> >  +
> >  +	if (panel) {
> >  +		bridge = devm_drm_panel_bridge_add(dev, panel,
> >  +						   DRM_MODE_CONNECTOR_Unknown);
> >  +	}
> >  +
> >  +	device_property_read_u32(dev, "ingenic,lcd-mode", 
> > &priv->lcd_mode);
> >  +
> >  +	priv->framedesc = dma_alloc_coherent(dev, 
> > sizeof(*priv->framedesc),
> >  +					     &priv->framedesc_phys, GFP_KERNEL);
> >  +	if (!priv->framedesc)
> >  +		return -ENOMEM;
> >  +
> >  +	priv->framedesc->next = priv->framedesc_phys;
> >  +	priv->framedesc->id = 0xdeafbead;
> >  +
> >  +	drm = drm_dev_alloc(&ingenic_drm_driver_data, dev);
> >  +	if (IS_ERR(drm)) {
> >  +		ret = PTR_ERR(drm);
> >  +		goto err_free_dma;
> >  +	}
> >  +
> >  +	priv->drm = drm;
> >  +
> >  +	drm_mode_config_init(drm);
> >  +	drm->mode_config.min_width = 0;
> >  +	drm->mode_config.min_height = 0;
> >  +	drm->mode_config.max_width = 800;
> >  +	drm->mode_config.max_height = 600;
> >  +	drm->mode_config.funcs = &ingenic_drm_mode_config_funcs;
> >  +
> >  +	drm_plane_helper_add(&priv->primary, 
> > &ingenic_drm_plane_helper_funcs);
> >  +
> >  +	ret = drm_universal_plane_init(drm, &priv->primary,
> >  +				       0, &ingenic_drm_primary_plane_funcs,
> >  +				       ingenic_drm_primary_formats,
> >  +				       ARRAY_SIZE(ingenic_drm_primary_formats),
> >  +				       NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
> >  +	if (ret) {
> >  +		dev_err(dev, "Failed to register primary plane: %i\n", ret);
> >  +		goto err_unref_drm;
> >  +	}
> >  +
> >  +	drm_crtc_helper_add(&priv->crtc, &ingenic_drm_crtc_helper_funcs);
> >  +
> >  +	ret = drm_crtc_init_with_planes(drm, &priv->crtc, &priv->primary,
> >  +					NULL, &ingenic_drm_crtc_funcs, NULL);
> >  +	if (ret) {
> >  +		dev_err(dev, "Failed to init CRTC: %i\n", ret);
> >  +		goto err_cleanup_plane;
> >  +	}
> >  +
> >  +	priv->encoder.possible_crtcs = 1;
> >  +
> >  +	drm_encoder_helper_add(&priv->encoder,
> >  +			       &ingenic_drm_encoder_helper_funcs);
> >  +
> >  +	ret = drm_encoder_init(drm, &priv->encoder, 
> > &ingenic_drm_encoder_funcs,
> >  +			       DRM_MODE_ENCODER_DPI, NULL);
> >  +	if (ret) {
> >  +		dev_err(dev, "Failed to init encoder: %i\n", ret);
> >  +		goto err_cleanup_crtc;
> >  +	}
> >  +
> >  +	ret = drm_bridge_attach(&priv->encoder, bridge, NULL);
> >  +	if (ret) {
> >  +		dev_err(dev, "Unable to attach bridge\n");
> >  +		goto err_cleanup_encoder;
> >  +	}
> >  +
> >  +	platform_set_drvdata(pdev, drm);
> >  +	priv->drm = drm;
> >  +	drm->dev_private = priv;
> >  +
> >  +	ret = drm_irq_install(drm, irq);
> >  +	if (ret) {
> >  +		dev_err(dev, "Unable to install IRQ handler\n");
> >  +		goto err_cleanup_encoder;
> >  +	}
> >  +
> >  +	ret = drm_vblank_init(drm, 1);
> >  +	if (ret) {
> >  +		dev_err(dev, "Failed calling drm_vblank_init()\n");
> >  +		goto err_uninstall_irq;
> >  +	}
> >  +
> >  +	drm_mode_config_reset(drm);
> >  +
> >  +	ret = clk_prepare_enable(priv->pix_clk);
> >  +	if (ret) {
> >  +		dev_err(dev, "Unable to start pixel clock\n");
> >  +		goto err_uninstall_irq;
> >  +	}
> >  +
> >  +	if (priv->lcd_clk) {
> >  +		parent_clk = clk_get_parent(priv->lcd_clk);
> >  +		parent_rate = clk_get_rate(parent_clk);
> >  +
> >  +		/* LCD Device clock must be 3x the pixel clock for STN panels,
> >  +		 * or 1.5x the pixel clock for TFT panels. To avoid having to
> >  +		 * check for the LCD device clock everytime we do a mode change,
> >  +		 * we set the LCD device clock to the highest rate possible.
> >  +		 */
> >  +		ret = clk_set_rate(priv->lcd_clk, parent_rate);
> >  +		if (ret) {
> >  +			dev_err(dev, "Unable to set LCD clock rate\n");
> >  +			goto err_pixclk_disable;
> >  +		}
> >  +
> >  +		ret = clk_prepare_enable(priv->lcd_clk);
> >  +		if (ret) {
> >  +			dev_err(dev, "Unable to start lcd clock\n");
> >  +			goto err_pixclk_disable;
> >  +		}
> >  +	}
> >  +
> >  +	ret = drm_fbdev_generic_setup(drm, 16);
> >  +	if (ret) {
> >  +		dev_err(dev, "Failed to init fbdev\n");
> >  +		goto err_devclk_disable;
> >  +	}
> fbdev is usually considered an optionl feature that do not prevent
> the display driver from loading.
> Consider what to do in the error case.