[PATCH 3/3] clk: sunxi-ng: h6: Allow video & vpu clocks to change parent rate

[Jernej Skrabec]

Video related clocks need to set rate as close as possible to the
requested one, so they should be able to change parent clock rate.

VPU clock sometimes has to be set to higher than default parent clock
rate. This is requ

Add CLK_SET_RATE_PARENT flag to tcon-lcd0, tcon-tv0 and ve.

Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
---
 drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
index 33980067b06e..3c32d7798f27 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
@@ -311,7 +311,7 @@ static SUNXI_CCU_M_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690,
 				       0, 3,	/* M */
 				       24, 1,	/* mux */
 				       BIT(31),	/* gate */
-				       0);
+				       CLK_SET_RATE_PARENT);
 
 static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "psi-ahb1-ahb2",
 		      0x69c, BIT(0), 0);
@@ -691,7 +691,7 @@ static SUNXI_CCU_MUX_WITH_GATE(tcon_lcd0_clk, "tcon-lcd0",
 			       tcon_lcd0_parents, 0xb60,
 			       24, 3,	/* mux */
 			       BIT(31),	/* gate */
-			       0);
+			       CLK_SET_RATE_PARENT);
 
 static SUNXI_CCU_GATE(bus_tcon_lcd0_clk, "bus-tcon-lcd0", "ahb3",
 		      0xb7c, BIT(0), 0);
@@ -706,7 +706,7 @@ static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_tv0_clk, "tcon-tv0",
 				  8, 2,		/* P */
 				  24, 3,	/* mux */
 				  BIT(31),	/* gate */
-				  0);
+				  CLK_SET_RATE_PARENT);
 
 static SUNXI_CCU_GATE(bus_tcon_tv0_clk, "bus-tcon-tv0", "ahb3",
 		      0xb9c, BIT(0), 0);
-- 
2.21.0