Re: [PATCH v2 1/4] opp: core: add regulators enable and disable

[Kamil Konieczny]

On 16.07.2019 06:03, Chanwoo Choi wrote:
> Hi Kamil,
> 
> On 19. 7. 15. ìí 9:04, Kamil Konieczny wrote:
>> Add enable regulators to dev_pm_opp_set_regulators() and disable
>> regulators to dev_pm_opp_put_regulators(). This prepares for
>> converting exynos-bus devfreq driver to use dev_pm_opp_set_rate().
> 
> IMHO, it is not proper to mention the specific driver name.
> If you explain the reason why enable the regulator before using it,
> it is enough description.
> 
>>
>> Signed-off-by: Kamil Konieczny <k.konieczny@xxxxxxxxxxxxxxxxxxx>
>> --
>> Changes in v2:
>>
>> - move regulator enable and disable into loop
>>
>> ---
>>  drivers/opp/core.c | 18 +++++++++++++++---
>>  1 file changed, 15 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/opp/core.c b/drivers/opp/core.c
>> index 0e7703fe733f..069c5cf8827e 100644
>> --- a/drivers/opp/core.c
>> +++ b/drivers/opp/core.c
>> @@ -1570,6 +1570,10 @@ struct opp_table *dev_pm_opp_set_regulators(struct device *dev,
>>  			goto free_regulators;
>>  		}
>>  
>> +		ret = regulator_enable(reg);
>> +		if (ret < 0)
>> +			goto disable;
>> +
>>  		opp_table->regulators[i] = reg;
>>  	}
>>  
>> @@ -1582,9 +1586,15 @@ struct opp_table *dev_pm_opp_set_regulators(struct device *dev,
>>  
>>  	return opp_table;
>>  
>> +disable:
>> +	regulator_put(reg);
>> +	--i;
>> +
>>  free_regulators:
>> -	while (i != 0)
>> -		regulator_put(opp_table->regulators[--i]);
>> +	for (; i >= 0; --i) {
>> +		regulator_disable(opp_table->regulators[i]);
>> +		regulator_put(opp_table->regulators[i]);
>> +	}
>>  
>>  	kfree(opp_table->regulators);
>>  	opp_table->regulators = NULL;
>> @@ -1610,8 +1620,10 @@ void dev_pm_opp_put_regulators(struct opp_table *opp_table)
>>  	/* Make sure there are no concurrent readers while updating opp_table */
>>  	WARN_ON(!list_empty(&opp_table->opp_list));
>>  
>> -	for (i = opp_table->regulator_count - 1; i >= 0; i--)
>> +	for (i = opp_table->regulator_count - 1; i >= 0; i--) {
>> +		regulator_disable(opp_table->regulators[i]);
>>  		regulator_put(opp_table->regulators[i]);
>> +	}
>>  
>>  	_free_set_opp_data(opp_table);
>>  
>>
> 
> I agree to enable the regulator before using it.
> The bootloader might not enable the regulators
> and the kernel need to enable regulator in order to increase
> the reference count explicitly event if bootloader enables it.
> 
> Reviewed-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>

Thank you, I will change commit description and send v3.

-- 
Best regards,
Kamil Konieczny
Samsung R&D Institute Poland