[PATCH v2 3/3] arm64: dts: freescale: Add support for i.MX8QXP AI_ML board

From: Manivannan Sadhasivam
Date: Fri Jul 19 2019 - 03:10:08 EST

Add support for i.MX8QXP AI_ML board from Einfochips. This board is one
of the Consumer Edition boards of the 96Boards family based on i.MX8QXP
SoC from NXP/Freescale.

The initial support includes following peripherals which are tested and
known to be working:

1. Debug serial via UART2
2. uSD
3. WiFi
4. Ethernet

More information about this board can be found in Arrow website:
https://www.arrow.com/en/products/imx8-ai-ml/arrow-development-tools

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Reviewed-by: Dong Aisheng <aisheng.dong@xxxxxxx>
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../boot/dts/freescale/imx8qxp-ai_ml.dts | 249 ++++++++++++++++++
2 files changed, 250 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 0bd122f60549..bd8460549d1a 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -24,4 +24,5 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
new file mode 100644
index 000000000000..3dc8757d9c42
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 Einfochips
+ * Copyright 2019 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx8qxp.dtsi"
+
+/ {
+ model = "Einfochips i.MX8QXP AI_ML";
+ compatible = "einfochips,imx8qxp-ai_ml", "fsl,imx8qxp";
+
+ aliases {
+ serial1 = &adma_lpuart1;
+ serial2 = &adma_lpuart2;
+ serial3 = &adma_lpuart3;
+ };
+
+ chosen {
+ stdout-path = &adma_lpuart2;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x80000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ user_led1 {
+ label = "green:user1";
+ gpios = <&lsio_gpio4 16 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ user_led2 {
+ label = "green:user2";
+ gpios = <&lsio_gpio0 6 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ };
+
+ user_led3 {
+ label = "green:user3";
+ gpios = <&lsio_gpio0 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc1";
+ default-state = "off";
+ };
+
+ user_led4 {
+ label = "green:user4";
+ gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
+ panic-indicator;
+ linux,default-trigger = "none";
+ };
+
+ wlan_active_led {
+ label = "yellow:wlan";
+ gpios = <&lsio_gpio4 17 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+
+ bt_active_led {
+ label = "blue:bt";
+ gpios = <&lsio_gpio4 18 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "hci0-power";
+ default-state = "off";
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi_reg_on>;
+ reset-gpios = <&lsio_gpio3 24 GPIO_ACTIVE_LOW>;
+ };
+};
+
+/* BT */
+&adma_lpuart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart0>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+/* LS-UART0 */
+&adma_lpuart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart1>;
+ status = "okay";
+};
+
+/* Debug */
+&adma_lpuart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart2>;
+ status = "okay";
+};
+
+/* PCI-E UART */
+&adma_lpuart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart3>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+ };
+};
+
+/* WiFi */
+&usdhc1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ bus-width = <4>;
+ no-sd;
+ non-removable;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+/* SD */
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020
+ IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020
+ IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020
+ IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020
+ IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020
+ IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020
+ IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020
+ IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020
+ IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020
+ IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020
+ IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020
+ IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020
+ IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020
+ IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020
+ >;
+ };
+
+ pinctrl_leds: ledsgrp{
+ fsl,pins = <
+ IMX8QXP_ESAI0_TX2_RX3_LSIO_GPIO0_IO06 0x00000021
+ IMX8QXP_ESAI0_TX3_RX2_LSIO_GPIO0_IO07 0x00000021
+ IMX8QXP_EMMC0_DATA7_LSIO_GPIO4_IO16 0x00000021
+ IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21 0x00000021
+ IMX8QXP_EMMC0_STROBE_LSIO_GPIO4_IO17 0x00000021
+ IMX8QXP_EMMC0_RESET_B_LSIO_GPIO4_IO18 0x00000021
+ >;
+ };
+
+ pinctrl_lpuart0: lpuart0grp {
+ fsl,pins = <
+ IMX8QXP_UART0_RX_ADMA_UART0_RX 0X06000020
+ IMX8QXP_UART0_TX_ADMA_UART0_TX 0X06000020
+ IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B 0x06000020
+ IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B 0x06000020
+ >;
+ };
+
+ pinctrl_lpuart1: lpuart1grp {
+ fsl,pins = <
+ IMX8QXP_UART1_RX_ADMA_UART1_RX 0X06000020
+ IMX8QXP_UART1_TX_ADMA_UART1_TX 0X06000020
+ >;
+ };
+
+ pinctrl_lpuart2: lpuart2grp {
+ fsl,pins = <
+ IMX8QXP_UART2_RX_ADMA_UART2_RX 0X06000020
+ IMX8QXP_UART2_TX_ADMA_UART2_TX 0X06000020
+ >;
+ };
+
+ pinctrl_lpuart3: lpuart3grp {
+ fsl,pins = <
+ IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0X06000020
+ IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0X06000020
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
+ IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
+ IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
+ IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
+ IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
+ IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041
+ IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021
+ IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021
+ IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021
+ IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021
+ IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021
+ IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021
+ IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22 0x00000021
+ >;
+ };
+
+ pinctrl_wifi_reg_on: wifiregongrp {
+ fsl,pins = <
+ IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24 0x00000021
+ >;
+ };
+};
--
2.17.1