Re: [PATCH v2 5/5] ARM: dts: sun50i: h6: Introduce Beelink GS1 board

[Maxime Ripard]

On Fri, Apr 05, 2019 at 02:24:46PM +0200, Clément Péron wrote:
> Beelink GS1 is an Allwinner H6 based TV box,
> which support:
> - Allwinner H6 Quad-core 64-bit ARM Cortex-A53
> - GPU Mali-T720
> - 2GB LPDDR3 RAM
> - AXP805 PMIC
> - 1Gbps GMAC via RTL8211E
> - FN-Link 6222B-SRB Wifi/BT
> - 1x USB 2.0 Host and 1x USB 3.0 Host
> - HDMI port
> - S/PDIF Tx
> - IR receiver
> - 5V/2A DC power supply
>
> Signed-off-by: Clément Péron <peron.clem@xxxxxxxxx>
> ---
>
> Thanks to Jagan and Icenowy, most of this devicetree is taken from their works on
> the OrangePi One Plus and Pine H64.
>
> Changes in v2 (Thanks to Maxime Ripard):
>  - move MMC pinctrl to SOC dtsi
>  - add board to Sunxi YAML file
>  - add PIO/R_PIO regulators
>  - remove always_on from SDIO regulators
>
>
>  .../devicetree/bindings/arm/sunxi.yaml        |   5 +
>  arch/arm64/boot/dts/allwinner/Makefile        |   1 +
>  .../dts/allwinner/sun50i-h6-beelink-gs1.dts   | 256 ++++++++++++++++++
>  3 files changed, 262 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
> index 11563d3f7c65..9ab9b266881d 100644
> --- a/Documentation/devicetree/bindings/arm/sunxi.yaml
> +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
> @@ -136,6 +136,11 @@ properties:
>            - const: lemaker,bananapro
>            - const: allwinner,sun7i-a20
>
> +      - description: Beelink GS1
> +        items:
> +          - const: azw,beelink-gs1
> +          - const: allwinner,sun50i-h6
> +

Can you make that a separate patch?

Maxime


--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature